Krishna Bhagya Jala Nigam Limited Tender

I04 - Wiring for lighting/powercircuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 -1.50 Sqmm etc complete with all lead and lifts as per directions of Engineer in Charge

I05 - Wiring for lighting/powercircuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 -10 Sqmm etc complete with all lead and lifts as per directions of Engineer in Charge

I06 - Wiring for lighting/powercircuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 -16 mm2 etc complete with all lead and lifts as per directions of Engineer in Charge

I07 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 - 2C x 1.5 mm2 etc complete with all lead and lifts as per directions of Engineer in Charge

I08 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990-2C x 2.5 mm2 etc complete with all lead and lifts as per directions of Engineer in Charge

I09 - Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board- 6A Batten Holder etc complete with all lead and lifts as per directions of Engineer in Charge

I10 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF,energy cross-3 with Short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898.- 50-63 A DP etc complete with all lead and lifts as per directions of Engineer in Charge

I11 - Supplying and fixing regular MCB distribution boards on wall/ woodboard/ flushmounting using required clamps, bolts, nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3phase/single door with powder coated painting Made out of 14SWG MS enclosure.- II - Double Door-4 Way SP & N etc complete with all lead and lifts as per directions of Engineer in Charge

I12 - Supplying & fixing of retro fit type-LED bulb.9 W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%.efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS10322/IEC60598, LM79 & LM80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2years Warranty against any manufacturing defect working under standard electrical condition.-9W, 6500K etc complete with all lead and lifts as per directions of Engineer in Charge

I13 - Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection-Min 5KV along with Over voltage/Overload, short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60 Hz application. Compliance to IS10322/IEC60598, LM79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with.W System Power consumption. LED Efficiency greater than 1301m/w, nominalCRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier wordmark/name shall be Engraved/Embossing on the diecast housing/Bodypart. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/ Nichia/ Lumileds/ Osram make LED Source.-LED Streetlight 120 W

I14 - Supply of LED Street light of 70 Watt S/L 6000k of Long life:25,000 burning hrs, Housing:Pressure die cast, Surge protection: upto 4 KV IP65 and IK07 & Feeicacy: 100 lumens/watt With Warranty of 2 Years against any manufacturing defect working under standard electrical conditions etc., Complete With all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I15 - Supply of LED flood light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000hr @ Lumen Maintenance of 70%, CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection-Min 5KV along with Over voltage/Overload, short circuit/miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60 Hz application. Compliance to IS10322/IEC60598, LM79 & LM80 Adherence with RoHS. UL approved MCPCB.Top access streetlight with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with.W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier wordmark/name shall be Engraved/Embossing on the die cast housing/Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.-LED Floodlight 150W

I16 - Supplying and fixing of 150 Watt LED Floodlight with three changing colours etc., Complete With all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I17 - Supplying and fixing of LED Floodlight converter panel box including timer,relay, 100 Amps 4 pole amps etc., Complete With all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I18 - Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.- On wall/ ceiling / Rafter / Girders etc., Complete With all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I19 - Fixing halogen/metal halide /SVL /IL /LED flood light fitting over existing pole/wall ceiling including clamps, bolts, nut sand wiring using suitable capacity wires.etc., Complete With all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I20 - Fabricating supplying and mounting MS box made out 14 SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 tanks treatment with powder coated paint and finally finished with approved colour etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I21 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC60947-2. (Icu 100%lcs). In 4 PMCCB, all Poles should have protection for Short-Circuit/Over Load. For Micro processor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism-FOUR Pole-100 A 25 kA etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I22 - Painting of existing streetlight pole after scrapping the old paint and painted with suitable colour enamel/ Silver paint including coping/footing of the pole.-8 m and above street light pole etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I23 - Painting of existing streetlight pole after scrapping the old paint and painted with suitable colour enamel/ Silver paint including coping/footing of the pole.-upto 5 m street light pole etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I24 - Supply and Installation/Fixing/Provision of Pole box with HRC Fuse/MCB provision and suitable connector/terminal for 3Ph/1Ph connections with Loop-In &Loop-Out terminals for10mm2/25mm 2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in aThermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65 (Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets.-200 mm x 200 mm x 98 mm etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I25 - Supply and Installation/Fixing/Provision of Pole box with HRC Fuse/MCB provision and suitable connector/terminal for 3Ph/1Ph connections with Loop-In &Loop-Out terminals for10mm2/25mm 2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in aThermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65 (Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets.-260 mm x 210 mm x 116 mm etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I26 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975- 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I27 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975- 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I28 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff-LT Cable 2.5 to 25 Sqmm etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I29 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff-LT Cable 35 to 95 Sqmm etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I30 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I31 - Supplying and fixing Aluminium End Terminal (Lug)-25 Sqmm etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I32 - Supplying and fixing Aluminium End Terminal (Lug)-16 Sqmm etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I33 - Supplying and fixing Aluminium End Terminal (Lug)-50 Sqmm etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I34 - Supplying and fixing Heavy Duty Copper Terminal Long Barrel (lugs)-25 Sqmm Copper Terminal, Apprx Wt: 11 Gm etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I35 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete.-Heavy Duty GI pipe of 80mm dia etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I36 - Supplying of on load change over switches 4poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)- 100 A etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I37 - Supplying and fixing of metal clad industrial sockets.-100 Amps etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I38 - Supplying and fixing of metal clad industrial plug.-100 Amps etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I39 - Supplying of 50 W LED bulb for post top lantern etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I40 - Supplying & fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.-300 x 50 mm etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I41 - River sluice gate forward reverse 10 HP Starter panel box including 32 Amps MCB 4 poleconnectors-2 Nos, overload relay-1 No, 32 A TP OFF/ON switch, 32 A MCB 4 pole, push button, Voltmeter & Amps meter etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I42 - Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase&Neutral) &1x1.0sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gangbox, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block.complete for each outlet.-Long point above 6Mtr upto10 Mtr from tapping point to outlet via switch etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I43 - Spilway gate forward reverse 20 HP Starter panel box including 32 Amps connectors-2 Nos, overload relay-1 No, 32 A TP OFF/ON switch, 32 A MCB 4 pole, push button, Voltmeter & Amps meter etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I44 - 11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification & Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I45 - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9 mm thick 2.5 m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should been closed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CCchamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts etc., complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I46 - Servicing of 125 KVA Diesel generator set including cost of labour, machinery, replacement of engine lubricant, oil filter, fuel filter, air filter, radiator water coolant oil, fuel injector, etc, wornout parts of generator and other minor accessories requiring replacement etc complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I47 - Servicng of 30 KVA Diesel generator set including cost of labour, machinery, replacement of engine lubricant, oil filter, fuel filter, air filter, radiator water coolant oil, fuel injector, etc, wornout parts of generator and other minor accessories requiring replacement etc complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I48 - Supplying and erecting 1 HP submersible pump including all material and labour etc complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I49 - Supplying and fixing of High intensity reflective radium water proof tape for road safety-3inch width etc complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I50 - GI/Copper strips for grounding connections, using necessary fixing materials as required.- 25 x 6 mm GI strip etc complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I51 - Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573-Epoxy Type-25 Sqmm, 4 Core labour charges for LT UG Cable Heat shrinkable Straight Through Joint-2.5 to 25 Sqmm etc complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I52 - Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573-Epoxy Type-95 Sqmm, 3.5/4 Core, labour charges for LT UG Cable Heat shrinkable Straight Through Joint-35 to 95 Sqmm etc complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.

I53 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF,energy cross-3 with Short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898.- 50-63 A TPN etc complete with all lead & lifts, loading & unloading and as per Directions of Engineer-in-charge.