Krishna Bhagya Jala Nigam Limited Tender

Code4 - Providing Helper (semi skilled labour) Having sufficient experience to assist pump operator to work in shift duties including Sunday and all days in irrigation period and as per the direction of Engineer-in-charge

Code5 - Providing Gardner/Sweeper for Headwork and Sub station in shift Duties including Sunday and all days and as per direction of Engineer in charge

Code6 - Providing Watchman/Security for Headwork and Sub station in shift Duties including Sunday and all days and as per direction of Engineer in charge

Code7 - Providing Valveman/Lineman for Rising main, Gravity main and Feeder and Bleeder lines for all supervision, Operation and Maintanance including Sunday and all days in irrigation period and as per direction of Engineer in charge

Code8 - Providing Helper (Heavy Mazdoor) for Rising main, Gravity main, Feeder lines of all supervision, Operation and Maintanance including Sunday and all days in irrigation period and as per direction of Engineer in charge

Code9 - Providing JEEP [ 4 wheeler vehicle/Bolero champer ] including driver, insurance, fuel & consumables Taxes & Duties etc. complete, for repairs of pipe lines and water management of filling up of 20 MI tanks and 15 Bandaras (considering 50 km per day). including Sunday and all days and as per direction of Engineer in charge.

Code10 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides & levelling the bottom of trench to the extent required, utilising the available excavated earth locally for the work etc, and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m.

Code11 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN 6.0 [HDPE 110 mm dia]

Code12 - Supplying, laying and jointing HDPE pipes For Grade PE80 PN 6.0 [HDPE 140 mm dia]

Code13 - Supplying, laying and jointing HDPE pipes For Grade PE80 PN 6.0 [HDPE 160 mm dia]

Code14 - Supplying, laying and jointing HDPE pipes For Grade PE80 PN 6.0 [HDPE 200 mm dia]

Code15 - Supplying, laying and jointing HDPE pipes For Grade PE80 PN 6.0 [HDPE 250 mm dia]

Code16 - Supplying, laying and jointing HDPE pipes For Grade PE80 PN 6.0 [HDPE 280 mm dia]

Code17 - Supplying, laying and jointing HDPE pipes For Grade PE80 PN 6.0 [HDPE 355 mm dia]

Code18 - Manufacturing, providing, transporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-7322:1985 with latest amendments and including perfect linking and welding of joints to correct position includng cost and conveyance of materials with all lead and lifts, cost all labour and giving satisfactory hydraulic test as per IS:3589:2001 with latest amendments for test pressure and working pressure both at factory and site etc. complete as per detailed specifications with inside lining two coat of food grade epoxy painting of approved make with each coat of 250 micron thick (after dry) over one coat of food grade epoxy primer of approved make with minium of 50 micron thick (after dry) and outside 25mm thick coating in CM 1:3 by providing 50x50mm weld mesh including loading and unloading of the pipes for the following category to suit PSC / MS / CI / AC / DI / PVC pipes. The weight of MS shell only by considered before lining and coating for arriving at the rate. The thickness of plate will be specified by the engineer. (Contractor will make his own arrangements for procuring water for testing) for:Pipe bends,branches, tail pieces, reducers etc. for upto 500mm dia pipes

Code19 - Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270,of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. [ 100 mm nominal size dia having minimum wall thickness 5.00 mm)

Code20 - Supplying and filling of Transformer Oil as per IS-335:1993 [EHV Grade Transformer Oil - New] with all lead and lift and as directed by Engineer incharge

Code21 - Supplying and filling of Gear oil HP-90 / Bearing oil SP 68 Prime, Grade for pumps. with all lead and lift and as directed by Engineer incharge.

Code22 - Supplying and filling of Grease GEM-RR3 Grade [Motor bearing grease] with all lead and lift and as directed by Engineer incharge

Code23 - Jelly Spreading (20-25 mm) Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants,removing exisiting jelly etc., complete. Work shall be carried out as per the instructions of Engineer- in-charge of works as per the standard procedure complete and as directed by Engineer-In-Charge

Code24 - Supplying and Installing of Thrust Bearing Housing Assembly of VT-30-20 WPIL PUMP, including cost of transportation of Thrust Bearing Assembly to Pump house, Assembling and Disassembling of Pump, Alignment, Balancing, Testing, Commissioning, including cost of labor service and using existing crane service at Jack-well with trail run of 72 hours, with a guaranteed period for satisfactory working of 2000 hours or 1 year whichever is later for the Thrust bearing housing assembly. [Thrust Bearing Housing assembly, WPIL Standard & WPIL Make only], Pump Make: WPIL, Model:VT-30-20 WPIL, Pump Perticulars:- Speed: 1488RPM, Capacity: 982.08cum/hr, Head:267.36mtrs, Pump input:793.44kw

Code25 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. complete as per the instructions of Engineer in charge. ( Supplying, laying and jointing HDPE Grade PE80-PN 4.0,160mm dia )

Code26 - Supplying, laying and jointing HDPE Grade PE80-PN 4.0,180mm dia

Code27 - Supplying, laying and jointing HDPE Grade PE80-PN 4.0,200mm dia

Code28 - Supplying, laying and jointing HDPE Grade PE80-PN 8.0,200mm dia

Code29 - Supplying, laying and jointing HDPE Grade PE80-PN 6.0,225mm dia

Code30 - Supplying, laying and jointing HDPE Grade PE80-PN 4.0,250mm dia

Code31 - Supplying, laying and jointing HDPE-Grade PE80-PN 6.0, 315mm dia

Code32 - Supplying, laying and jointing HDPE Grade PE80-PN 4.0,355mm dia

Code33 - Supplying, laying and jointing HDPE Grade PE80-PN 4.0,450mm dia

Code34 - Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-7322:1985 with latest amendments and including perfect linking and welding of joints to correct position includng cost and conveyance of materials with all lead and lifts, cost all labour and giving satisfactory hydraulic test as per IS:3589:2001 with latest amendments for test pressure and working pressure both at factory and site etc. complete as per detailed specifications with inside lining two coat of food grade epoxy painting of approved make with Each coat of 250 micron thick (after dry) over one coat of food grade epoxy primer of approved make with minium of 50 micron thick (after dry) and outside 25mm thick coating in CM 1:3 by providing 50x50mm weld mesh including loading and unloading of the pipes for the following category to suit PSC / MS / CI / AC / DI / PVC pipes. The weight of MS shell only by considered before lining and coating for arriving at the rate. The thickness of plate will be specified by the engineer. (Contractor will make his own arrangements for procuring water for testing for: Note: 1) For small works where the C.M. lining is not practicable for inside surface of the pipe, food grade expoxy painting of two coat over one coat of epoxy primer may be proposed and got approved. 2) The above rates are applicable only for pipe works etc. (2) Pipe bends,branches, tail pieces, reducers etc. for above 500mm dia pipescomplete. complete as per the instructions of Engineer in charge.[5.37.2]

Code35 - Providing 25mm thick outer linning of CM 1:3 to pipe in proportion by volume ( aggregate for outer lining shall be mixture of 80 percent natural sand 20 percent 6 mm down crushed stone chips ) over 13 gauge 50 x 50 mm opening size weld mesh including cost of all materials, machinery, labour, surface cleaning, fininshing, curing, conveying to spot wherever required and all other ancillary operations & all necessary works complete as per specification and as directed by engineer in charge.

Code36 - Work of repair and rewinding of LV side upto 100 KVA power transformer as specified below: a. Drain out the contaminated transit oil completely from the reactor; flush the windings of the transformer with jet force of good BDV value transit oil. b. Removing the burnt out windings from all the three phases of the transformer provide new windings of LV side in all three phases. c. Clean the terminal connection with carbon tetra chloride solution. d. Fill the new transit oil (departmental supply) replace the bolts, nuts, washers and provide gasket etc., wherever necessary provide silica gel breather. e. Fix the transformer in the bet and charge the transformer and observe Performance “ON LOAD” and ensure for trueness of the transformer performance. Vol 5 WATER SUPPLY AND UGD WORKS. Page 225. SL No:19.2

Code37 - Painting of transformers. Vol 5 WATER SUPPLY AND UGD WORKS. Pg No:A-43 . Sl No:613

Code38 - Repair OLTC of transf. Vol 5 WATER SUPPLY & UGD WORKS. Page No:A-46 Sl No: 731

Code39 - Repair reactor of Isolator. Vol 5 WATER SUPPLY AND UGD WORKS. Page No:A-46 Sl No: 732

Code40 - Repair soft starter panel. Vol 5 WATER SUPPLY AND UGD WORKS. Page No:36 Sl No:1252

Code41 - Work of overhauling and servicing upto 1250KW, 6.6KV, motor as specified below: a. Disconnect the HT/LT, Cable and record motor details take out the motor from bed b. Check alignment and record details c.Check IR values before removing motor. d. De-couple the motor from pump & taken out from removing anchor bolts e. Dismantling motor end shields f. Removing rotor from stator, checking IR values of stator cleaning stator with thinner, and petrol, g. Removing the moisture of stator by using heaters(oven) h. Revarnishing of stator & rotor baking in oven, applying becktol red on windings on both stator & rotor i.Greasing of bearings, j. Assembling of motor k. Checking IR values of motor and recording the same l. Alignment of motors with pump, and commissioning the motor on No-Load and load trial. Vol 5 WATER SUPPLY AND UGD WORKS. Page 230. SL No:19.21

Code42 - 110 V, 15 A float and 30 A boost (with float and boost battery charger as per technical specification).KPTCL SCHEDULE OF RATES 2023-24 Vol-6 Page 38. SL No:10.2.4

Code43 - Supplying and fixing HRC fuse units base on existing switch / panel board. PWD Ele SR 2-23-24. Sl No: 5.9.3 Above 100A to 300A Pg 15.

Code44 - Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submersible pumpsets etc.(with guarantee period not less than 6 months)

Code45 - Supplying, fixing and commissioning C.I Scour valve (sluice valve) of approved make bodyand seat ring of bronze PN 1.0 conforming to IS:14846 of specified diameter and to withstand specified pressure with all accessoreis true to line and perfect linkingwith pipes on either side including loading, unloading, lifting and placing in position, cleaning ends, inserting gaskets into correct position, jointing pipes and valve to form water tight joint, cost of all jointing materials, machinery, labour and all other ancillary operations complete as per the direction of engineer in charge. 200 mm diameter sluice valve with accessorries. Sl No:8.36.3

Code46 - Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.pressure gauge Size 100 mm. With all lead and lift as directed by engineer incharge.

Code47 - Providing Stainless steel bolts/square bar and plates complete as per specifications and as per dir ections of the Engineer-in-Charge.