Krishna Bhagya Jala Nigam Limited Tender

code04 - Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate (with top seal) consisting of skin plate, siffeners, horizontal and vertical girders, wheels, guide rollers,rubber seals with all accessories for canal escape/regulator vent including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and three coats of cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings etc., complete with all lead & lifts and as directed by the Engineer-in-Charge.

code05 - Design, fabrication, supply, erection and commissioning of embedded parts (with top seal seat) consisting of sill beam, wheel tracks, seal seats, guide rails, groove lining upto top with all accessories for vertical lift roller gate for canal escape/regulator including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding,finishing, cleaning, applying one coat of zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint complets as per specifications and approved drawings etc., complete with all lead & lifts and as directed by the Engineer-in-Charge.

code06 - Design, fabrication, supply, erection, testing and commissioning of adequate capacity screw type hoist consisting of supporting structure,platfom, railing, ladder with all accessories for operating canal escape/regulator gate including cost of all materials, machinery, labour,cutting, aligning, anchoring, welding, finishing, cleaning, greasing,applying two coats of zinc chromate red oxide primer and three coats of approved synthetic enamel paint and all other ancillary operations complete as per specifications and approved drawings etc., complete with all lead & lifts and as directed by the Engineer-in-Charge.

code07 - Earth work excavation for Foundation by mechanical means for all works & depth, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius as specified and all lead & lifts including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work etc., as directed by the Engineer-in-Charge. - In ordinary/soft rock without blasting.

code08 - Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)pipes NP-3 Class conforming to IS:458-1988 with latest amendments using ordinary Portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e., rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc., complete. (Contractor will make his own arrangements for procuring water for testing). (600mm Dia Pipe) Before the execution of the work, the contractor shall carry out the survey etc., as directed by the Engineer-in-Charge.

code09 - Providing, fabricating and placing in position reinforcement steel for RCC works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required, tying with 1.25 mm diameter soft annealed steel wire and all other ancillary operations complete etc., with all lead & lifts and as directed by the Engineer-in-Charge.

code10 - Providing and filling murrum / gravelly soil ( CNS soil ) for foundation or around pipes including cost of all materials, labour, spreading soil in layers of 100 to 150 mm, breaking clods, watering, compaction by earth masters to achieve density control of not less than 90 percent and all other ancillary operations etc., complete with all lead & lifts and as directed by the Engineer-in-Charge.

code11 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications etc., as directed by the Engineer-in-Charge. - MIX 1:2:4 (M15) Using 20 mm and down size graded crushed coarse aggregates.

code12 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications etc., as directed by the Engineer-in-Charge. - Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates.