Karnataka Veterinary Animal And Fisheries Sciences University Tender

Providing and removing centering, shuttering, strutting, propping etc., and removal of from work for foundations , footings, bases of columns for mass concrete including cost of all materials , labour complete as per specifications.

KSRB 4.2.2 Providing & laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320 Kgs with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregates @ 0.459 cum, with superplastisiser @ 3 ltr confirming to IS9103-1999 reaffirmed -2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation plinth and ground floor level for Column including cost of materials, labour, HOM of machinery, curing complete as per specification. No. KBS 4.1., 4.6

Providing and removing centering, shuttering, strutting, propping etc., for columns pillars, piers, abutments post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specification.

Providing and constructing granite / trap / basalt / rubble stone masonry in foundation with cement mortar 1:6 ( uncoursed), bond stones at two m apart in each course including cost of materials, labour, curing complete as per specifications.

Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stone chistle dressed in courses not less than 15 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications.

Providing and laying in position plain cement concrete of mix 1:2:4 using 20 mm and down size graded granite metal machine mixed, concrete laid in layers not exceeding 15 cms, thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Providing and constructing burnt brick masonry for basement and superstructure with approved quality of non – modular bricks of standard size of class designation 35 with cement mortar 1:6 including cost materials, labour charges, scaffolding, complete as per specifications.

Providing 20mm thick cement plaster in single coat with cement mortar 1:3, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering / providing and removing scaffolding , including cost of materials, labor, curing complete as per specifications.

Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements steel laths by means of alternate clips, suspension shaft with high tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plats, guide channels ball bearing arrangements, for inside & out side locking with push & pull operations complete including puling hooks, 4 Nos. handles with all fittings and accessories, painted with a coat of re lead paint ( without top cover) cost of materials, labour, HOM of machinery complete as per specifications.

Providing and fixing top covers made out of 20 gauge M.S sheet over pull and push shutters bent to shape including cost of red lead primer coat of painting, materials, labor, HOM of machinery complete as per specifications.

KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification No. KBS 7.12

KSRB 7.10 : Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using double track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, raul plugs, or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium sections pretreated for removal of any Specification No. KBS

Providing TMT steel reinforcement for R.C.C work including straitening, cutting, bending, hooking, placing in position lapping and /or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps and wastage shall not be measured an paid) cost of materials, labour, HOM of machinery complete as per specifications. 500 Bars

Fabricating, supplying and erecting MS angular truss of span up to 10mtrs, the bottom and top member is provided with 50x50x6mm double equal angles welded back to back and in between top and bottom line in areas of mid section is provided with 50x50x6mm single angle for vertical and included members and at supporting ends 40x40x5mm single angle is provided. All the members are welded together with 6mm guzzle plate. The entire truss is anchored in RCC column by using 4 nos. of MS anchor bolts at each support with 10mm thick base plate and shoe plate. The work includes, cutting, straitening, placing in position and applying one coat of red oxide primer and two coats of enamel painting including cost of all materials , labour charges and hire charges of machineries for cutting, welding, grinding and erection equipments etc. complete as per specifications.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm

Earth excavation (in deposited soil) and filling sides of foundation upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with all lead and lift including cost of labour complete as per specifications.

KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete asper specifications.- with primer

Supplying and wiring adopting loop system in existing PVC conduit / casing / capping using copper PVC insulated multi strand 2x1.5 sqmm copper wire with a 6 Amps flush type SP control wittch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a woo/ PVC round block complete for each outlet. short point

Supplying and wiring adopting loop system in existing PVC conduit / casing / capping using copper PVC insulated multi strand 2x1.5 sqmm copper wire with a 6 Amps flush type SP control wittch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a woo/ PVC round block complete for each outlet. Point wiring Medium point

Supplying and wiring adopting loop system in existing PVC conduit / casing / capping using copper PVC insulated multi strand 2x1.5 sqmm copper wire with a 6 Amps flush type SP control wittch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a woo/ PVC round block complete for each outlet. Point wiring Long point

Supplying 6a flush/projected type socket and 6 amps flush / projected typew SP switch either surface / flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. 6amps socket 2 way

Supply and fixing of bakelite D.P/ Socket/switch with/ without neon indicator over existing wood board or flush mounting in plastic/nitches DP Socket 32 Amps Flush/Projected type DP Switch

Supplying PVC / GI flexible conduit pipe 20mm dia fixing on surface over inveted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and the either end of the pipe terminated completely

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more that 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws etc.

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more that 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws etc.

Supplying and fixing MCB distribution panel confirm to IS 8828, on wall/ wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCCB’s as an in comer for 3 phase double door with necessary bus completely wired to use on 440 volts 3 phase 4 wire powder coated painting etc., complete with a provision for fixing of single / three phase suitable capacity MCCB / MCB’s as out goings confirm to IS 8828. 4 Way.

Supplying boxtype fluorescent tube light fitting of 4’-36/40 watts fluorescent tube fitting, made out of MS sheet and stove enameled with low loss open construction copper wound ferromagnetic ballast, starter, locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230volts AC supply including 1No. 4’-36/40 watts fluorescent tube

Fixing all types and all capacities fluorescent/false ceiling/spot light/CFL fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required nos of round blocks and clamps (if required) (P.No. 26, I.No. 7) a) On wall/ceiling/Rafter/Girders