Karnataka Urban Water Supply And Drainage Board Tender

-do- Main Table : 1500 mmW x 600mm D x 750 mm ht (Main table and side table with post framed table top)

Meeting table Wooden Providing and fixing meeting table consisting of 25 mm thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge 1500 mm Dia X900 mm D X 750 mm Ht (6 seater)

-do- 2400 mm Dia X1200 mm D X 750 mm Ht (12 seater)

Modular Partition Providing and fixing modular partition consisting of 75mm thick MS CRCA frames powder coated, tile based system frame, 8mm thick MDF covered with Fabric of approved colour for Top file finish, 5mm thick clear ordinary glass both side Middle tile finish, or 8mm thick MDF covered with Fabric of approved colour for Middle tile finish, 9mm thick Laminate tile of approved colour for Botom tile finish, Continuous skirting level raceway will be provided. as per specifications, drawings and as directed by Engineer in charge 75mm thick frames tile based system (Frame with Glass)

Providing , fabricating, assembling and fixing in position aluminium partition using 101.60mm x 44.45mm x 3.18mm aluminium, mat finish or glossy finish , anodized sections combination of plain , single groove and double groove members should not exceed 0.60mc/c and bottom member of required lengths, joints mitred and corner grinded sub dividing assembled frame should be stiffened with corner angles. Stripped and fixed with screws rawl plug and teakwood guttas to RCC column or masonry on sides. RCC lintels or beams at top and mosaic floor at bottom; including cutting chistelling and making good with cement mortar to match the surface .Providing and fixing 12mm.thick prelaminated sheet (Ecoboard – exterior grade )of approved colour for bottom panel of maximum height 0.9m, and 5.50 mm thick plain or pin headed glass for middle panel and top panel with glazing clips pf 19.05mm.x17.30mm.1.00mm. All the aluminium sections used should be treated for removal of any rust and prevention of further rust formation and coated with greasy materials for non adherence of mortar or any other sticky materials: The vertical members should be embedded in the flooring by making suitable size holes and fixing with cement mortar. All the frame should be thoroughly cleaned free from rust , scale or dirt. work should be carried out as per direction of engineer-in-charge of the work with all lead and lift as per chief Architect’s drawing etc., complete to a degree of perfection. using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.

Providing, fabricating, assembling and fixing in position aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section 114.3x44.45 thickness 3.18mm, section weight 2.646kg/m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections cut to length joint metred cornersgrinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C. columns or masonry on sides. beams and flooring in bottom. including cutting, chistling and making good with cement mortar to match the surface; all the frames throughly cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.

Providing and fixing aluminium casement windows, combination of fixed glazing at top fully openable windows using Z sections of 33mm, web thickness 4mm, weight 0.663 kg/m; central mullion section 59x33mm with web thickness 3mm section weight 1.123kg/m; the shutters on aluminium hinges with approved quality of fixtures such as aluminium tower bolts, handles, stays etc., providing and fixing 5.5mm plain glass for shutters fitted with glazed clips 19mmx17.3mmx11mm. 0.9mm thick and rubber beading, aluminium sections cutting to required length, joints metered, subdividing the frame tennoned and rivetted, assembled frame to be stiffened with end clips at corner, angles and fixed to wall, lintel beam, floor;cill, as the case may be with necessary screws, rawl plugs, cutting masonry or concrete and making good the orginal surface; aluminium surface pretreated for removal of any rust and coated with greasy materials for nonadherence of mortar or any other sticky materials; (coating removed after instalation) and throughly cleaned free from dirt, rust etc., including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.

Supply of Executive Chair

Supply of Revolving Chair

Supply of Visiting Chair