Karnataka Urban Water Supply And Drainage Board Tender

Planter Box: Providing and fixing of Planter box of size 450x450x600mm ht in the corridor using 19mm commercial plywood and finishing with 4mm thick veener polished to melamine matt finish including all MS frame work and labor etc complete

Modular Sliding Doors: Providing Modular Sliding Folding partition with 40 dB Acoustic, hanged from ceiling on a single track. Partition to be manually only/and semi automatically openable. The finishing profiles to be hidden.It should include interalocking trepizoial alluminum profile for sound proof connection between elements spring loaded retracble sound seal at the top and bottum element.The rate shall be inclusive of girder support steel frame work covered with double skin 12.5mm thick gypsum board suspended the system and the patrtition shall be insulated with mineral wool to achive sound rating of minmum 40DB TSC.The steel frame work should be properly fixed /anchored in RCC slabs/columns to achive required level rigidness

Glass display boards: Providing and fixing of 12mm thick clear toughened glass Display board with edge polish allround and making the provisions for the holes to fix the panel to the wall using 20mm SS Studs 60mm long with proper fixtures etc complete. (size 1.00 mt x 1.50 mt).

Work stations: Providing and fixing straight workstation (Frame) consisting of back to back unit made of 75mm thick MS CRCA powder coated tile based system for main and return spine, top tile finish 8mm thick MDF covered with fabric of approved color and one writing board (600mm width) and one soft board (600mm width) per work station bottom tile finish 9mm thick laminate tile of approved color, raceway -one middle race way (600 mm width)below table top per work station and continuous race way at the skirting level, wire manager-ABS plastic grommet one number per table, Table top -25mm thick PLPB with straight table top End table 25mm thick PLPB with straight edge bound hardware - M powder coated corner bkt, cantilever bkt, separator hook on bkt, L bkt and Table joint plate, as per specifications, drawings and as directed by Engineer in charge.Sharing Work station: 2A) Size : 1200mm W x 600mm D x 1200mm Ht. (Sharing work station with edge binding table top, Back to Back (Set of 2)

Non Sharing Work station: 2C) Size : 1200mm W x 600mm D x 1200mm Ht. (Non Sharing work station with edge binding table top, Single unit)

Free Standing Table:Providing and fixing Free Standing Table for Cabin - without frames consisting of 25 mm thick PLPB table top, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Wire manager - ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge. Main table 1500mm W x 750mm D x 750 H (Edge binding table top) Side table 900 mm W x 450mm D x 750mm H

Free Standing Table:Providing and fixing Free Standing Table for Cabin - without frames consisting of 25 mm thick PLPB table top, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Wire manager - ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge, Main table 1500mm W x 540mm D x 750 H

Meeting table : Providing and fixing meeting table consisting of 25mm thick PLPB table top edge bounded, 25 mm thick PLPB with edge bounded end tabel , 18mm thick PLPB with edge bonded modesty, hardwear -minifix assembly and screw leg., as per specification, drawing and as directed by engingeing in charge. 1500mm diax 900mm D x 750mm H (6 seater)

Mobile Wooden Pedestal units: Providing and fixing 450mm W x 450mm D x 685mm H mobile pedestal unit- wooden with 18mm thick PLPB with edge bonded for body, two equal drawing and one filing drawer with centralised locking system, telescoping channels, castors, Handles, lock etc., completed as per specifications, drawings, and as directed by Engineer in charge.

Executive Tables for Cabins: Providing and fixing executive tables consisting of straight and end table using 19mm thick commercial ply finished with 1.0mm laminate of approved color with matching edge bonded, raceway -one middle race way (600 mm width)below table top and continuous race way at the skirting level, wire manager-ABS plastic grommet one number per table, Table top -25mm thick commercial ply finished with 1.0m laminate of approved color for straight table and end table with straight edge with necessary hardware and H.BACK Wooden CREDENZA/STORAGE UNIT with openable shutters using 19mm commercial ply finished with 1.0mm approved laminate, and individual locking system for shutters, 9mm ply with edge bound for rear portion with Hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge 1800mm L x 800mm D x 750mm H.SIDE TABLE - 900mm x 500mm D x 750mm & H.BACK CREDENZA/STORAGE UNIT - - 1200mm L x 500mm D x 750mm H.AEE/TA/PA

Executive Tables for Cabins: Providing and fixing executive tables consisting of straight and end table using 19mm thick commercial ply finished with 1.0mm laminate of approved color with matching edge bonded, raceway -one middle race way (600 mm width)below table top and continuous race way at the skirting level, wire manager-ABS plastic grommet one number per table, Table top -25mm thick commercial ply finished with 1.0m laminate of approved color for straight table and end table with straight edge with necessary hardware and H.BACK Wooden CREDENZA/STORAGE UNIT with openable shutters using 19mm commercial ply finished with 1.0mm approved laminate, and individual locking system for shutters, 9mm ply with edge bound for rear portion with Hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge 1800mm L x 800mm D x 750mm H.SIDE TABLE - 900mm x 500mm D x 750mm & H.BACK CREDENZA/STORAGE UNIT - - 1200mm L x 500mm D x 750mm H.CE cabin

Executive Tables for Cabins:Providing and fixing executive tables consisting of straight and end table using 19mm thick commercial ply finished with 1.0mm laminate of approved color with matching edge bonded, raceway -one middle race way (600 mm width)below table top and continuous race way at the skirting level, wire manager-ABS plastic grommet one number per table, Table top -25mm thick commercial ply finished with 1.0m laminate of approved color for straight table and end table with straight edge with necessary hardware and complete as per specifications, drawings and as directed by Engineer in charge.1800mm L x 800mm D x 750mm H.SIDE TABLE - 900mm x 500mm D x 750mm.EE/DCE

Executive Tables for Cabins:Providing and fixing executive tables consisting of straight and end table using 19mm thick commercial ply finished with 1.0mm laminate of approved color with matching edge bonded, raceway -one middle race way (600 mm width)below table top and continuous race way at the skirting level, wire manager-ABS plastic grommet one number per table, Table top -25mm thick commercial ply finished with 1.0m laminate of approved color for straight table and end table with straight edge with necessary hardware and complete as per specifications, drawings and as directed by Engineer in charge.1800mm L x 800mm D x 750mm H.SIDE TABLE - 900mm x 500mm D x 750mm.SE cabin

Tables: Providing and fixing “HORSE SHOE TABLE” of overall size 4500 x 2200x 750mm using teak wood of size 100x100mm for legs at suitable intervals, 50x75mm section for horizontal support at top, 50x100mm section horizontal support at bottom as shown in figure. The top of the table which should be 600mm in width all along, is covered with 19mm thick block board and 1.50mm thick formica sheet fixed on top of the block board, all of approved make. The inside vertical surface is covered with 6mm thick one side teak plywood, including providing teak wood beeding alround the table for good aesthetic appearance, including joining the wooden sections properly using nails/screws, fevicol complete as per specification including cost of all materials and labour, painting, lead & lift and as per the direction of Engineer-in-Charge of the work and also as per drawing appended.

Storage unit: Providing and fixing wooden storage unit one side laminate with 18mm ply/ PLPB with edge bound for body, 18mm ply/PLPB with openable shuttters and individual locking system for shutters, 9mm ply with edge bound for rear portion with Hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge

Storage unit: Providing and fixing wooden storage unit one side laminate with 18mm ply/ PLPB with edge bound for body, 18mm ply/PLPB with openable shuttters and individual locking system for shutters, 9mm ply with edge bound for rear portion with Hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge

Storage unit: Providing and fixing wooden storage units with partitions one side laminate with 18mm ply/ PLPB with edge bound for body, 18mm ply/PLPB with openable shuttters and individual locking system for shutters, 9mm ply with edge bound for rear portion with Hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge

Providing and fixing of teak wood beading of size 40x6mm thick as per apporved shape and desgin including all materials,polishing and labour etc..complete as per direction of engineering incharge.

Providing and fixing Laminate paneling/Boxing proper line and level consisting of 12mm thick commercial plywood of approved make and sample on to partition walls by means of approved wooden screws/nails. The ply surface to be pasted with approved shade and sample, 1.5mm thick laminate, with grooves as directed by engineer in charge. The edges should have matching Teak wood beading finished in approved melamine polish, all complete with all lead and lift Conference room including training area

Providing and fixing Laminate paneling/Boxing proper line and level consisting of 12mm thick commercial plywood of approved make and sample on to partition walls by means of approved wooden screws/nails. The ply surface to be pasted with approved shade and sample, 4mm thick veneer, with grooves as directed by engineer in charge and finished in approved melamine polish, all complete with all lead and lift