Karnataka Urban Water Supply And Drainage Board Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 1,42,000Document Cost
Refer DocumentsTender Fee
₹ 1,770
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
KUWSDB/2024-25/OW/WORK_INDENT290Tender No
KUWSDB/2024-25/OW/WORK_INDENT290Tender Authority
Karnataka Urban Water Supply And Drainage Board ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - Engaging Electrician/Mechanic for maintenance of pumping machineries and electro mechanical equipments and allied works as per water supply schedules at pumphouse etc., complete with all lead and lift as directed by Engineer Incharge.(The manpower payment shall be made as per Minimum wages Notification prevailing at the time of O&M contract).(1 no)
12
19936
239237.76
... More
code05 - Engaging Chemist for testing of water samples and other allied works as per water supply schedules at WTP and Housing chamberetc., complete with all lead and lift as directed by Engineer Incharge.(The manpower payment shall be made as per Minimum wages Notification prevailing at the time of O&M contract).(1 no)
12
21160
253929.84
... More
code06 - Engaging watch man for watch and ward during day/night shift at Housing chamber / Water treatment plant etc, complete with all lead and lift as directed by Engineer Incharge.(The manpower payment shall be made as per Minimum wages Notification prevailing at the time of O&M contract).(6 nos)
72
17537
1262720.16
... More
code07 - PART B- GENERAL ITEMS:- Providing PAC (Polyaluminium Chloride) for Pressure filter at township area of HAL for treatment of raw water complete as per specification with all lead and lift as directed by Engineer incharge.
1900
39
74100
... More
code08 - Providing Sodium Hypochlorite for Pressure filter at township area of HAL for treatment of raw water complete as per specification with all lead and lift as directed by Engineer incharge.
1000
21
21000
... More
code09 - Providing antiscalan for RO Plant complete as per specification with all lead and lift as directed by Engineer Incharge.
40
406
16271.2
... More
code10 - Testing of Raw Water and Pure water samples for its Physical Charasteristics as per IS 10500:2012 with latest ammendments complete with all lead and lift as directed by Engineer Incharge. (Unit shall be read as sample instead of Nos)
24
6560
157440
... More
code11 - Testing of Pure water sampleas for its Biological Charasteristics as per IS 10500:2012 with latest ammendments complete with all lead and lift as directed by Engineer Incharge.(Unit shall be read as sample instead of Nos)
12
2200
26400
... More
code12 - Supply of Diesel for 750 KVA DG set for 215 HP pumpset at Housing Chamber at Kadaba with all lead and lift as directed by Engineer Incharge.
1800
90
162270
... More
code13 - PART C: EVENT ORIENTED ITEMS:-Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to complete in the following strata. Ordinary/soft rock (without requiring blasting) Depth upto 1.50 m with all lead and lift as directed by Engineer Incharge
32.5
454
14755
... More
code14 - Cutting charges for cutting CI (or) DI pipes already laid in the ground with necessary approved tools for: 375mm dia pipes complete with all lead and lift as directed by Engineer Incharge
1
229
229
... More
code15 - Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations, cutting of pipes wherever necessary, jointing with DI specials (excluding cost of specials) and rubber gaskets, cleaning the socket and spigot end with soap solution, applying soft soap to the socket and spigot ends before insertion of rubber gaskets, jacking and fixing in perfect conditions etc. The cost to include soap solution, soft soap, waste etc. and giving necessary hydraulic test to the required pressure as per ISS with all lead and lifts and cost of all jointing materials. (The contractor will make his own arrangements for water for testing. Earth work excavation in trenches to be measured and paid for seperately) Note: In sewerage projects for internal cement mortal lining ( CML ) of DI pipes, if High Alumina Cement ( HAC ) as recommended in Annexure B clause 16.3 of IS8329:2000 is considered in place of Slag or Sulphate Resistance Cement ( SRC ), the cost of pipes may be increased by 5-6% from the prices listed. For 350mm dia K-9 with all lead and lift as directed by Engineer Incharge
3
6024
18072
... More
code16 - Providing and fixing of DI specials with ISI mark confoming to IS 9523 / 2000 suitable for jointing 100 mm to 600 mm dia DI pipes coated with rust prevention coatings as below: NOTE: A) External coating: a) Metalic zinc with finishing layer of bituminous as per Annexure "A" of IS:9523/2000 b) Zinc rich paint with finishing layer of bituminous as per Annexure "A" of IS:9523 / 2000 c) Bituminous paint as per Annexure "C" of IS:9523 / 2000 B) Internal Lining: a) Portaland Cement (with or without additives) mortar as per Annexure - "B" of IS:9523/2000 b) Cement Mortar with coat coat as per Annexure "B" of IS:9523 / 2000 c) Bituminous paint as per Annexure "C" of IS:9523 / 2000 etc. complete with all lead and lift as directed by Engineer Incharge
80
188
15040
... More
code17 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications with all lead and lift as directed by Engineer Incharge.
32.5
160
5200
... More
code18 - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For : HDPE pipes 160mm dia PE-100 PN-8. complete as per specifications with all lead and lift as directed by Engineer Incharge.
3
875
2625
... More
code19 - Cutting charges only for cutting DI/ HDPE pipes already laid in the ground with necessary approved tools for: 175mm dia pipes with all lead and lift as directed by Engineer Incharge
1
92
92
... More
code20 - Hiring charges for Electrofusion Machine for jointing HDPE pipes complete with all lead and lift as directed by Engineer Incharge.
1
2500
2500
... More
code21 - Cleaning of Water Storage Tank or Sump by following method: (1) Empty the Tank/ Sump and make it to near dry, (2) Apply bleaching powder uniformally (@ Tank capacity x 0.5 gms/litre) inside the Tank/ Sump and wait for one hour, (3) After one hour, clean/ rinse the Tank/ Sump with fresh water. Repeat the process (2) & (3) for two to three times, all complete as per specifications with all lead and lift as directed by Engineer Incharge.
375000
1
375000
... More
code22 - Supply and Fixing of Diaphragm for 3 way Valve for Pressure Filter at Township area of HAL with all lead and lift as directed by Engineer Incharge.
4
11000
44000
... More
code23 - Supply and Fixing of Assembly Kit for Pressure Filter at Township area of HAL with all lead and lift as directed by Engineer Incharge.
1
27000
27000
... More
code24 - Supply and Fixing of Solenoid Valve for Pressure Filter at Township area of HAL with all lead and lift as directed by Engineer Incharge.
2
17000
34000
... More
code25 - Supply and Fixing of Gasket for Victaulic coupling for Pressure Filter at Township area of HAL with all lead and lift as directed by Engineer Incharge.
4
1000
4000
... More
code26 - Supply and Fixing of Seal Kit for Butterfly valve for Pressure Filter at Township area of HAL with all lead and lift as directed by Engineer Incharge.
2
5000
10000
... More
code27 - Supply and Fixing of Seal Kit for Vessels of Pressure Filter at Township area of HAL with all lead and lift as directed by Engineer Incharge.
2
5500
11000
... More
code28 - Supply and Fixing of Backwash Pump seal kit with all lead and lift as directed by Engineer Incharge.
1
13000
13000
... More
code29 - Supply and Fixing of Panel MCB for Pressure Filter at Township area of HAL with all lead and lift as directed by Engineer Incharge.
2
10000
20000
... More
code30 - Supply and Fixing of Dosing pumps for Pressure Filter at Township area of HAL with all lead and lift as directed by Engineer Incharge.
4
8000
32000
... More
code31 - Replacement of UV System for RO Plant with all lead and lift as directed by engineer Incharge.
1
1949
1949.15
... More
code32 - Replacement of 20" Jumbo Filters for RO Plant with all lead and lift as directed by engineer Incharge.
12
423
5084.76
... More
code33 - Providing Dosing instrument for RO Plant and servicing charges with all lead and lift as directed by Engineer Incharge.
1
8135
8135.59
... More
code34 - Servicing of Motor with all lead and lift as directed by Engineer Incharge..
2
2500
5000
... More
code35 - Supply and filling of sand media for sand Filters at RO Plant with all lead and lift as directed by Engineer Incharge
200
18
3600
... More
code36 - Supply and filling of activated carbon media for Activated carbon filter at RO Plant with all lead and lift as directed by Engineer Incharge
200
75
15000
... More
code37 - Supply and fixing of multiport valve (40 NB) For sand Filters and Activated carbon filter at RO Plant with all lead and lift as directed by Engineer Incharge
2
3300
6600
... More
code38 - Servicing of RO Plant (including transportation charges) with all lead and lift as directed by Engineer Incharge..
1
4500
4500
... More
code39 - Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surfaceeven and sand paper smooth, cost of materials, labour complete as per specifications with all lead and lift as directed by Engineer Incharge.
1078.79
53
57175.87
... More
code40 - Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications with all lead and lift as directed by Engineer Incharge.
1078.79
82
88460.78
... More
code41 - Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats (Second Coat) on old work as per specifications awith all lead and lift as directed by Engineer Incharge.
1078.79
82
88460.78
... More
code42 - Finishing walls with water proofing cement paint of required shade :Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 l/10 m² complete including cost of Priming coat including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications with all lead and lift as directed by Engineer Incharge.
2173.85
87
189124.95
... More
code43 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/ Chajjas/ Sunken portion of WC Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification with all lead and lift as directed by Engineer Incharge.
225
817
183825
... More
code44 - Repairs to Air Valve 80mm dia including spares with all lead and lift as directed by Engineer Incharge.
8
3000
24000
... More
code45 - Repairs to Sluice Valve 80mm dia including spares with all lead and lift as directed by Engineer Incharge.
8
2000
16000
... More
code46 - Repairs to Scour Valve(Sluice Valve) 250 mm dia including spares with all lead and lift as directed by Engineer Incharge.
4
3000
12000
... More
code47 - Repairs to NRV (Check valve) 350mm dia including spares with all lead and lift as directed by Engineer Incharge.
1
3000
3000
... More
code48 - Repairs to Rolling shutter at Housing chamber at Kadaba Tank including spares with all lead and lift as directed by Engineer Incharge.
1
10000
10000
... More
code49 - Transformer Repairs: Repairs and Reconditioning of 11KV class single coil/multi coil Conventional (Aluminium wound) and 3/4/5 Star Rated failed Distribution Transformers of various Capacities and Conversion of CSP to Conventional bolt & nut type on lumpsum percentage (%) basis (Material, Labour & Salvage) at Transformer repair center Note: 1.The rates are exclusive of Transformer Oil, 2. The rates are for repair of 3 Coils, 3. Released Oil has to be returned to the Board store by concerned contractor 4. The released winding will be retained by the repair agency. (The salvage value is added in the rates) for upto 500 KVA Copper Wdg, 3/4/5 rating
1
93879
93879
... More
code50 - 315KVA-1 NO,11kV/433 Volts Transformer: Work of servicing, leak arresting and oil filtration upto 500 KVA power transformers as specified below: a. Removing cable connection of transformer after isolating the supply dismantling the cable connection, b. Replacing the existing leakage L.V side H.T Busing Gasket, oil seal, bolts and nuts etc. of the power transformer, c. Replacing the existing non-functioned damaged dehydrating Breather by a new breather with new silica gel for the above transformer, d. Arresting oil leak from exclusive vent, neutral bushing of valves, flanges, drying arresting the leakage for L.V and HV side of power transformer and refilling of the transformer oil including cost of labour and necessary repaired materials., e. Repaint the Transformer using light grey epoxy paint of 2 coated as original., f. Filtering of oil in the transformer at the transformer center by hot process using stream line filter such that the dielectric strength of oil in the transformer conforms to ISI specification, g. Painting of entire structure of transformer yard including fencing using silver paint with all lead and lift as directed by Engineer Incharge.
1
75000
75000
... More
code51 - Supplying and topping up of new Transil oil for 315KVA-1 NO,11kV/433 Volts Transformer with all lead and lift as directed by Engineer Incharge.
0.1
105545
10554.5
... More
code52 - Supplying and fixing brand new silica gel breather 315KVA-1 NO,11kV/433 Volts Transformer with all lead and lift as directed by Engineer Incharge.
1
195
195
... More
code53 - Supplying and fixing HRC fuse link on existing switch fuse base with watt loss as per IS-13703 Above 315 to 425 Amps with all lead and lift as directed by Engineer Incharge.
3
1043
3129
... More
code54 - Supplying fixing MCCB over the existing panel board using necessary screws, bolts,nuts and wiring complete. Protection of overload and short circuit with thermal Magnetic/ Microprocessor release and earth fault as per IS-13947 (4 pole) with all lead and lift as directed by Engineer Incharge for 500-630Amps 50kA .
1
41899
41899
... More
code55 - Supplying and fixing of 4 pole power contactor with NO/ NC contacts on existing wood/ panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 rating and as per IS-13947 265 Amps with all lead and lift as directed by Engineer Incharge.
2
49405
98810
... More
code56 - HT Cable Termination Repalcement- Supplying and making 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE terminations- INDOOR & OUTDOOR JOINTING KIT latest amendments 11 KV (3 core x 95/185 sqmm) outdoor. with all lead and lift as directed by Engineer Incharge.
1
6725
6725
... More
code57 - HT Cable Termination Repalcement- Supplying and making 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE terminations- INDOOR & OUTDOOR JOINTING KIT latest amendments 11 KV (3 core x 95/185 sqmm) indoor.with all lead and lift as directed by Engineer Incharge.
1
6402
6402
... More
code58 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes, 185 sqmm long barrel with all lead and lift as directed by Engineer Incharge.
10
274
2740
... More
code59 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes,225 sqmm long barrel with all lead and lift as directed by Engineer Incharge.
10
349
3490
... More
code60 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes 300 sqmm long barrel with all lead and lift as directed by Engineer Incharge.
10
515
5150
... More
code61 - Supply and fixing of semiconductor fuse of Digital soft starter including,including transportation from housing chamber to workshop (both to and fro), loading, unloading. Repair & replacement. Servicing and commissioning with all Labour charges for refixing, alligning and commissiong with all tools & materials etc., with all lead and lift as directed by Engineer Incharge.
2
40000
80000
... More
code62 - Repair, replacing, rewiring, programming of Mother Board of 215HP Digital softstarters with all software & hardware units including dismantling transportation from housing chamber to workshop (both to and fro), loading, unloading. Servicing and commissioning with all Labour charges, engineering works for refixing, servicing and commissiong with all tools & materials etc.,
1
80000
80000
... More
code63 - Replacing of powershunt All propylene capacitors with brand new in APFC panel : Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase 440/440 volts grade for power factor improvement of rotating machineries like induction motor
50
480
24000
... More
code64 - Supply and fixing of UV/OV relay in control panel of 215HP including transportation to housing chamber ,with all Labour charges for refixing, alligning and commissiong with all tools & materials etc.,
1
16000
16000
... More
code65 - Replacing the burntout cable by brand new Supply and laying of LT UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average + /- 5% and resistivity 14 Ohms/KM (Max) as per IS-3975. , 1Run x 3.5c x 185sqmm with all lead and lift as directed by Engineer Incharge.
0.05
691218
34560.9
... More
code66 - Replacing the burntout 1Run x 3c x 185sqmm by brand new Supply and laying of HT UG Cable 11 kV, 3 Core, HTUG Cable for insulations High quality clean XLPE compound shall be used (Free from microvoids, Moisture content, ambers and contaminations) with pressure extruded, inner sheeth ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia in average +/- 2.5% and Resistivity 14 Ohms/KM (Max) as per IS-3975. with all lead and lift as directed by Engineer Incharge.
0.02
1343513
26870.26
... More
code67 - Labour charges for removing the pump from platfrom by loosening of coupling bolts with all tools & materials etc., for 215 HP Pumpsets without causing damage to pumpset and its accessories and neighbouring utilities with all lead and lift as directed by Engineer Incharge.
1
16000
16000
... More
code68 - Supply and fixing of mechanical seal, including transportation from housing chamber to workshop (both to and fro), loading, unloading. Repair & replacement of minor spare parts. Servicing and commissioning with all Labour charges for refixing, alligning and commissiong with all tools & materials etc.,, machinery and equipment at housing chamber at kadaba tank with all lead and lift as directed by Engineer Incharge.
1
255000
255000
... More
code69 - Supply and fixing of Bearing, including transportation from housing chamber to workshop (both to and fro), loading, unloading. Repair & replacement of minor spare parts. Servicing and commissioning with all Labour charges for refixing, alligning and commissiong with all tools & materials etc.,machinery and equipment at housing chamber at kadaba tank with all lead and lift as directed by Engineer Incharge.
1
253000
253000
... More
code70 - Servicing & Rewinding of 215HP Induction motor: Dismantling of the motor from the pump ,transpotation to work shop & rewinding of the motor & replacing of driving and non-driving end bearings, Terminal block, End lead wire of sustainable length, bolts,nuts, cooling pipe,air relief plug, & Key's of 2Nos etc,.with necessory lathe work. After completing the repair work the pump & motor will be transported to the pump house. Erection,aligning & servicing with all respect. with all lead and lift as directed by Engineer Incharge .
1
150000
150000
... More
code71 - Servicing and repairs to Pump Monitoring unit. Includes Dismantling, loading & unloading transportation to workshop (to & fro), repairs & replacement, servicing & commissioning with all labour and tools & equipments with all repect. For any of the following Overload protection Seal monitor relay for tripping the pumpset in case of failure of mechanical seal. Winding overheating protection for tripping the pumpsets in case of overheating of windings due to clogging of impeller or any other variation in voltage and frequency. Reverse rotation protection to cut off the supply in case of reverse rotation with all lead and lift as directed by Engineer Incharge.
3
8000
24000
... More
code72 - Dismantling the motor from the system by loosing the bolts, nuts and cleaning spares by using cleaning agent and rewinding of motor with 'F' class insulation with suitable size copper wire varnish etc., complete as per standard practice and fix the motor to the original position and test the motor in running condition. The released scrap copper wire shall be retained by contractor/repairer. For 12.50HP /15HP Monoblock Submersible Pumpset at Township Area of HAL with all lead and lift as directed by Engineer Incharge.
1
5000
5000
... More
code73 - Repairs to control panel and starter panel of12.5 HP/15HP with all lead and lift as direcetd by Engineer Incharge.
1
7000
7000
... More
code74 - Supplying of 4'feet - PVC Batten with integrated LED tube 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-215V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1x 4' - 20 /22 w, with all lead and lift as directed by Engineer Incharge.
4
690
2760
... More
code75 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 70W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. )-LED Streetlight 70 watts with all lead and lift as directed by Engineer Incharge.
2
5992
11984
... More
code76 - Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. with all lead and lift as directed by Engineer Incharge.
6
490
2940
... More
code77 - Replacement of fuse and fuse wire with with all lead and lift as directed by Engineer Incharge.
1
4000
4000
... More
code78 - Supplying, installation, testing & commissioning of 12V DC, 150 AH capacity batteries in poly propylene container for U.P.S. Sealed maintenance free batteries..with all lead and lift as directed by Engineer Incharge.
2
15895
31790
... More
code79 - Supplying, erecting, testing & commissioning of ON-LINE UPS of 2KVA system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.
1
23210
23210
... More
code80 - Servicing of Existing DG set at Kadaba housing chamber: Supply of Kirloskar Care Premium Genuine Oil 50 Liters Can complete as per specification with all lead an dlift as directed by Engineer Incharge
1
32500
32500
... More
code81 - Supply and fixing of PRE-FILTER CARTRIDGE for DG set complete as per specification with all lead an dlift as directed by Engineer Incharge
2
12500
25000
... More
code82 - Supply and fixing of FUEL FILTER CARTRIDGE for DG set complete as per specification with all lead an dlift as directed by Engineer Incharge
2
6500
13000
... More
code83 - Supply and fixing of LUBE OIL FILTER for DG set complete as per specification with all lead an dlift as directed by Engineer Incharge
1
3500
3500
... More
code84 - Supply and fixing of AIR CLEANER PRIMARY ELEMENT for DG set complete as per specification with all lead an dlift as directed by Engineer Incharge
2
13500
27000
... More
code85 - Supply and Fixing of AIR CLEANER SAFETY ELEMENT for DG set complete as per specification with all lead an dlift as directed by Engineer Incharge
2
5800
11600
... More
code86 - Supply and Fixing of RH LOCK WITH CATCHER 100-750 KVA for DG set complete as per specification with all lead an dlift as directed by Engineer Incharge
1
2150
2150
... More
code87 - Supply of Kirloskar Care Genuine Coolant Premix 26 Liters Can for DG set complete as per specification with all lead an dlift as directed by Engineer Incharge
1
6250
6250
... More
code88 - Supply and fixing of 12V 180AH KOEL GREEN MAKE BATTERY for DG setcomplete as per specification with all lead an dlift as directed by Engineer Incharge
2
26500
53000
... More
code89 - Supply of DISTILLED WATER 5LTR complete as per specification with all lead an dlift as directed by Engineer Incharge
1
500
500
... More
code90 - Supply of CLEANING WASTE for DG set complete as per specification with all lead an dlift as directed by Engineer Incharge
2
650
1300
... More
code91 - STARTER REPARING/SERVICING CHARGES for DG set complete as per specification including LABOUR CHARGES with all lead an dlift as directed by Engineer Incharge with all lead an dlift as directed by Engineer Incharge
1
5000
5000
... More
code92 - Supply and Fixing of CONTACTOR COIL LX1FK 240V AC for DG set complete as per specification with all lead an dlift as directed by Engineer Incharge
1
23500
23500
... More
code93 - Servicing of AMF Panel for existing DG set with all spares, components, wiring etc complete with all lead and lift as directed by Engineer Incharge.
1
34500
34500
... More
code94 - Repair and Servicing of Electromagnetic flow meter and its transmitter for 300mm dia electro magnetic flow meter with all required accessories and spares with all lead and lift as directed by Engineer Incharge.
1
38000
38000
... More
code95 - Communication system (Mobiles) Monthly rent and Usage charges for Junior Engineer.
12
500
6000
... More
code96 - Communication system (Mobiles) Monthly rent and Usage charges for Operators, Helpers, watchman, Chemist, Electrician.
156
500
78000
... More
code97 - Providing New Cartridge for existing Printers to office use with all lead and lift as directed by Engineer Incharge.
5
620
3100
... More
code98 - Printing and Stationary Articles like ledger, Forms, Log book etc to maintain the records of pumping machinery, & other stationeries.
1
26545
26545
... More
code99 - Providing Table and chairs with all lead and lift as directed by Engineer Incharge. (1 set shall consists 1 wooden table, 4 Executive chairs)
4
21000
84000
... More
code100 - Providing Uniform to Staff with all lead and lift as directed by Engineer Incharge.
28
2000
56000
... More
code101 - Providing Reflective jackets with all lead and lift as directed by Engineer Incharge.
28
550
15400
... More
code102 - Providing Safety gum boots with all lead and lift as directed by Engineer Incharge.
28
1100
30800
... More
code103 - Providing Safety gloves with all lead and lift as directed by Engineer Incharge.
28
430
12040
... More
code104 - Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 50. All internal parts such as float, shell with appurtenances., all cover bolts of austenitic alloy / SS 304 steel, DN 50 float of HOSTAFLON / SS 304 and gaskets and seals of EPDM. Epoxy powder coating (EP-P) inside and outside colour blue RAL5005. The valves should be designed for all the three functions i.e., 1. Large orifice for venting of large air volumes on start up. 2. Large orifice for intake of large air volumes. 3. Small orifice for discharge of pressurized air during operation.For PN 10.0 For TP Air Valves of 80mm dia with all lead and lift as directed by Engineer Incharge.
2
29005
58010
... More
code105 - Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 with the latest amendments only. The stem sealing should be with toroidal sealing rings (minimum 2 " O " rings). Body and bonnet should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. For PN-10: (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) etc. complete For PN-10: 80 mm with all lead and lift as directed by Engineer Incharge.
2
10393
20786
... More
code106 - Supply and delivery of Stihl FS 250 bush cutter with all lead and lift as directed by Engineer Incharge.
1
27966
27966.1
... More
code107 - supply of Stihl Oil (2T) with all lead and lift as directed by Engineer Incharge.
5
508
2542.35
... More
code108 - Supply of Stihl Nylon rope (53 Mtr) with all lead and lift as directed by Engineer Incharge.
2
932
1864.4
... More
code109 - Supply of Safety helmet with all lead and lift as directed by Engineer Incharge.
4
254
1016.96
... More
code110 - Providing Petrol for bush cutter with all lead and lift as directed by Engineer Incharge.
50
103
5162.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%