Karnataka Urban Water Supply And Drainage Board Tender

code04 - Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 500x500 mm etc complete as directed by the Engineer- In- Charge of work

code05 - Providing and fixing of Extension spindle rods,PN 10 /16 suitable for Gate valve of following dia for open and closing application, ExtensionSpindle lengths shall be available on required sizes as per site conditions, spindle shall be of fixed type, suitable size of MS Square bar epoxy coated, bottom adaptor & Spindle cap (epoxy coated /galvanised) ductile iron grade of EN1563 EN EJS-400-15 / IS1865 Spheroidal Graphite Iron Gr40. Protection tube of PVC, Top and Bottom cover / Bottom Connector shall be made by PVC, Bolt shall be made by Zinc coated steel 8.8 Split pin shall be made by Electro galvanized, this set up should help to have a buried application of Gate Valves etc. complete as per the directions of the Engineer-in-Charge. spindle rods for backwash valves - 200 to 450mm dia etc complete as directed by the Engineer- In- Charge of work

code06 - Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc inspection door for PW channel etc complete as directed by the Engineer- In- Charge of work

code07 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing).etc complete. PVC pipes 63mm dia., 6 kg/sqcm & class 3 for pipe line from Alum tank to RW channel etc complete as directed by the Engineer- In- Charge of work

code08 - Raw water channel - MS gate - 1.2 Mtr height Providing and fixing of suitable size MS Gates with corrosion resistant paint of 2 coats over one coat of primer, at suitable places required for controlling the flow of water in WTP at different locations and removing damage/corrosive gate as per the design and drawings with all lead and lift etc complete & as directed by the Engineer-Incharge.

code09 - Flash mixer -Paddles and accessories. 1.5 Mtr Height Providing , fixing and repairing of Stainless steel paddles of suitable size to fit to the Gearbox of Flash mixer including all allied works such as, Bottom bed, Bearings, bearing housings etc complete as directed by the Engineer- In- Charge of work

code10 - Alum tank - Paddles and accessories. 1.0 Mtr height (3No.) Providing, fixing and repair of Stainless steel paddles of suitable size to fit to the Gearbox of Alum tanks including all allied works such as Bearings, bearing housings etc complete as directed by the Engineer- In- Charge of work