Karnataka Urban Water Supply And Drainage Board Tender

Storage Unit - one side laminate: providing and fixing wooden storage unit one side laminate with 18 mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with openable shutters & and individual locking system for shutters, 9mm PLY with edge bound for rear portion with Hafele fitting hinges, hafele locks, minifix assembly, screw legs, handels and tower bolt complete as per specifications with all leads and lifts and cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment,transportation charges, loading and unloading charges and all other incidental charges with all lead and lift etc complete and as directed by the engineer-in-charge PLY storage- 900 mm W x 430 mm D x 2100mm ht.

PLY storage- 900 mm W x 430 mm D x 1200 mm ht.

Providing, fabricating, assembling and fixig in position Aluminium partitions using aluminium sections of mat finish or glassy finish in combination of plain grove and double grove as per requirments for the frames of overall size 63.5mm*38.1mm. With thickness of 2mm. having section weight, plain sections 1.054kg/m,single grove thickness 1.95mm. section weight 1.094kg/m, double grove thickness 1.9mm section weight 1.094kg/m and bottom member 114.3mm*44.45mm thickness 3.18mm weight 2.646 kg/m aluminium louvers section size 36.5mm*34.93mm 1.45mm thicksection weight 0.429kg/m; bottom portions provided with 12mm thick prelminted sheet both sides of approved colour lamination exterior grade upto 0.9m height, spacing of vertical member not exceeding 0.6m c to c; sections are cut to required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames; the assembled frame stiffened with corner angles, stripped and fixed with screws, rawl plugs and teak wood gutties to RCC columns on sides, RCC lintels or beams at top and floor at bottom, including cutting chistelling and making good with cement mortor to match thye surface; providing and fixing 5.5mm thick plain glass for middle portion viz., 0.9m to 2.13m and top panel with louvers sections; the glass and panels fittd with glazing clips of 19mm*17.3mm of thickness 0.9mm weight 0.124kg/m, aluminium sections treated for removal of any rust and prevention of further rust formation, coated with greasy materials; vertical members embedded in the flooring by making suitable sized holes and fixing with cement mortor, with necessary opening for fixing of door of standard size ( excluding cost of door) all the frame throughly cleaned, free from rust, scale or dirt including cost of materials, fixtures, labour and HOM with all lead and lift etc complete as per specifications and as directed by Engineer in-charge. -do- using aluminium section Powdered coated to a minimum of 60 to 70 Microns with exterior durable pure polyester grade powder of approved quality