Karnataka Urban Water Supply And Drainage Board Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Karnataka Urban Water Supply And Drainage Board - KUWSDB Tender
Manpower Supply
Opening Date28 Aug 2024
Closing Date11 Sep 2024
Tender Amount₹ 48,07,354.88
Costs
EMD
₹ 96,500Document Cost
Refer DocumentsTender Fee
₹ 1,210
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
KUWSDB/2024-25/OW/WORK_INDENT247Tender No
KUWSDB/2024-25/OW/WORK_INDENT247Tender Authority
Karnataka Urban Water Supply And Drainage Board ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
CODE-004 - Carrying out the meter reading, issue of bills, door to door water charges collection and preparation of DCB statement and maintenance water supply related ledgers etc.,by engaging minimum 3 person water charges collector, 1 person computer operator and to complete the assigned job works for the period of 8 months and as per the directions of Engineer incharge. The manpower payment as per latest Minimum wages act (GOK) order. The rate is inclusive of Basic Salary, DA, ESI-3.25percent, EPF -12percent, PF admin charges-0.5percent.3 person-issue water chagres bills and collection,3 person - issues of water charges bills and collection.
1
645248
645248.64
... More
CODE-005 - Engaging above mentioned pump operator and plumber staff at Jackwell cum pumphouse in night shift (one person at a time on shift basis) as supporting staff to night shift staff to carry out the Pump operation of 65HP DWVT pumpset and also to work as a Watchman since the Jackwell is located in the river bank as safety measures.The manpower payment as per latest Minimum wages act (GOK) order. The rate is inclusive of Basic Salary, DA, ESI-3.25percent, EPF -12percent, PF admin charges-0.5percent.
242
598
144885.4
... More
CODE-007 - Supplying of Liquid chlorine - disinfectant agent to Kushalanagara Treatment plant required for treatment of water for 8 Months. The rate is inclussive of transportation, loading, unloading, stacking charges with all lead and lift as directed by Engineer in charge.per cylinder
5
49000
245000
... More
CODE-008 - Supplying of bleaching powder to Kushalanagara Treatment plant required for treatment of water for 8 Months. The rate is inclussive of transportation, loading, unloading, stacking charges with all lead and lift as directed by Engineer in charge.
240
60
14400
... More
CODE-009 - Supply of SAE 10 oil as oil lubricant for 2 nos of 65HP DWVT pumpset at Jackwell cum pumphouse in Kushalanagar Town required for 8 Months. The rate is inclussive of transportation, loading, unloading, stacking charges with all lead and lift as directed by Engineer in charge.
120
200
24000
... More
CODE-010 - Conducting water quality test for raw water and pure water samples for physical, chemical and biological parameters as per CPHEEO standards for once in a week for 8 months in ISO certified laboratory and submission of report with all lead and lift as directed by Engineer in charge.
160
675
108000
... More
CODE-011 - Conducting turbidity, pH and residual chlorine tests and conducting jar test on daily basis at WTP laboratory as per CPHEEO standards by using required reagents/ chemicals/ consumables with all lead and lift as directed by Engineer in charge. No of test - 3 samples per day
720
50
36000
... More
CODE-012 - Part B - Event oriented - Repair & Replacement, Capital works
Cutting Asphalt/Concrete road surface using machine cutter for leakage pit with earth work excavation in all classifications of soil including all lead and lifts bailing out water with pumps including barricading, danger lighting etc., as per requirement and disposing of the excavated stuff as directed. After attending the leak, refilling the trench for 30 cm depth quarry dust above and around pipelines and balance with available earth in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming including watering and consolidation by mechanical means approved by Engineer Incharge. (Work to be carried out as per leak repair manual and the rate includes hire charges of dewatering Pump, tractor, Jeep with all kinds of Labour in a Complete manner) with all lead and lift as directed by Engineer in charge.
15
1157
17355
... More
CODE-013 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite with all lead and lift as directed by Engineer in charge.
110mm dia - 6 Kg/cm2
100
255
25500
... More
CODE-014 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite with all lead and lift as directed by Engineer in charge. 90mm dia PVC pipe- 6 Kg/cm2
100
174
17400
... More
CODE-015 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite with all lead and lift as directed by Engineer in charge.75mm dia PVC pipe- 6 Kg/cm2
100
123
12300
... More
CODE-016 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite with all lead and lift as directed by Engineer in charge. 63mm dia PVC pipe- 6 Kg/cm2
100
88
8800
... More
CODE-017 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite with all lead and lift as directed by Engineer in charge. 160mm dia PVC pipe- 6 Kg/cm2
100
420
42000
... More
CODE-018 - Supplying of special moulded variety PVC couplers as per IS 7834 -1987 and fabricated as per IG124 / 1984 with ISI mark and with latest amendments to walk site etc., complete with all lead and lift as directed by Engineer in charge.
63mm dia
25
43
1075
... More
CODE-019 - Supplying of special moulded variety PVC couplers as per IS 7834 -1987 and fabricated as per IG124 / 1984 with ISI mark and with latest amendments to walk site etc., complete with all lead and lift as directed by Engineer in charge 90mm dia
25
125
3125
... More
CODE-020 - Supplying of special moulded variety PVC couplers as per IS 7834 -1987 and fabricated as per IG124 / 1984 with ISI mark and with latest amendments to walk site etc., complete with all lead and lift as directed by Engineer in charge. 75mm dia
25
67
1675
... More
CODE-021 - Supplying of special moulded variety PVC couplers as per IS 7834 -1987 and fabricated as per IG124 / 1984 with ISI mark and with latest amendments to walk site etc., complete with all lead and lift as directed by Engineer in charge. 110mm dia
20
171
3420
... More
CODE-022 - Supplying of special moulded variety PVC couplers as per IS 7834 -1987 and fabricated as per IG124 / 1984 with ISI mark and with latest amendments to walk site etc., complete with all lead and lift as directed by Engineer in charge.160mm dia
20
335
6700
... More
CODE-023 - Supplying of special moulded variety PVC elbows as per IS 7834 -1987 and fabricated as per IG124 / 1984 with ISI mark and with latest amendments to walk site etc., complete with all lead and lift as directed by Engineer in charge.
63mm dia
10
101
1010
... More
CODE-024 - Supplying of special moulded variety PVC elbows as per IS 7834 -1987 and fabricated as per IG124 / 1984 with ISI mark and with latest amendments to walk site etc., complete with all lead and lift as directed by Engineer in charge. 90mm dia
10
276
2760
... More
CODE-025 - Supplying of special moulded variety PVC elbows as per IS 7834 -1987 and fabricated as per IG124 / 1984 with ISI mark and with latest amendments to walk site etc., complete with all lead and lift as directed by Engineer in charge.75mm dia
10
192
1920
... More
CODE-026 - Supplying of special moulded variety PVC elbows as per IS 7834 -1987 and fabricated as per IG124 / 1984 with ISI mark and with latest amendments to walk site etc., complete with all lead and lift as directed by Engineer in charge. 110mm dia
10
302
3020
... More
CODE-027 - Supplying of special moulded variety PVC elbows as per IS 7834 -1987 and fabricated as per IG124 / 1984 with ISI mark and with latest amendments to walk site etc., complete with all lead and lift as directed by Engineer in charge. 160mm dia
10
471
4710
... More
CODE-028 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100percent leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The Rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work with all lead and lift as directed by Engineer in charge. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR Rate In Rss of valves and provision for corresponding dia MS flanges should be made in the estimate.) - PN 16
80 mm dia PN 16 Class.
2
10393
20786
... More
CODE-029 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100percent leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The Rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work with all lead and lift as directed by Engineer in charge. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR Rate In Rss of valves and provision for corresponding dia MS flanges should be made in the estimate.) - PN 16 100 mm dia PN 16 Class.
2
12456
24912
... More
CODE-030 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100percent leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The Rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work with all lead and lift as directed by Engineer in charge. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR Rate In Rss of valves and provision for corresponding dia MS flanges should be made in the estimate.) 150 mm dia PN 16 Class.
2
21150
42300
... More
CODE-031 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100percent leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The Rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work with all lead and lift as directed by Engineer in charge. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR Rate In Rss of valves and provision for corresponding dia MS flanges should be made in the estimate.) 200 mm dia PN 16 Class.
2
33036
66072
... More
CODE-032 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100percent leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The Rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work with all lead and lift as directed by Engineer in charge. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR Rate In Rss of valves and provision for corresponding dia MS flanges should be made in the estimate.) 250 mm dia PN 16 Class.
2
51727
103454
... More
CODE-033 - Cutting charges for cutting CI / DI pipes already laid in the ground with necessary approved tools For attending leakages in 250mm dia D.I / C.I Raw water rising main with all lead and lift as directed by Engineer in charge.
250mm dia pipes
8
167
1336
... More
CODE-034 - Providing Ductile Iron Push on special confirming to IS 9523:2000- All D.I flanged MJ collar. For attending leakages in 250mm dia D.I / C.I Raw water rising main with all lead and lift as directed by Engineer in charge.
250mm dia
4
5788
23152
... More
CODE-035 - Providing & fixing Mechanical joints to cast iron pipes or Ductile iron pipes including cost of rubber gaskets and testing of joints. mechanical joints items will be supplied by the department. (contractor will make his own arrangements for procuring water for testing) for etc. complete as directed by the engineer-in-charge. For attending leakages in 250 mm dia DI/CI Raw water rising main
4
1778
7112
... More
CODE-036 - Road Reinstatement of Asphalt /Concrete roads after leak attending with earth work excavation of compacted soil depositing on bank with all lead and lifts including danger lighting and barricading. Providing, laying, spreading and compacting graded stones aggregate as per wet mix macadam specifications. Applying tack coat on granular base such as WBM and WMM surface hot bitumen primer at 4 kg per 10 sqm, heating bitumen in layer to be laid with boiler fitted with spray set of 300 mm thickness. Above laid with bituminous concrete or M20 concrete premixed with bituminous binder at 5.4 to 5.6percent of mix and filler, to achieve the desired compaction to give minimum of 45mm thickness compacted. The work shall be carried as per leak repair manual and includes all kinds of materials disposing off the excess excavated Earth with all lead and lifts by vehicle including loading, unloading, labour, HOM of machinery etc. in a complete manner
75
1690
126750
... More
CODE-037 - Solvent Cement
15
237
3559.35
... More
CODE-038 - Supplying PVC specials conforming to IS 4985:2000 with latest amendments including transportation to destination, loading, unloading, placing and stacking with all lead and lift and as directed by Engineer in charge.160mm dia PVC repair Collar- 6 Kg/cm2
15
1525
22881.3
... More
CODE-039 - Supplying PVC specials conforming to IS 4985:2000 with latest amendments including transportation to destination, loading, unloading, placing and stacking with all lead and lift and as directed by Engineer in charge.110mm dia PVC repair Collar- 6 Kg/cm2
15
550
8262.75
... More
CODE-040 - Supplying PVC specials conforming to IS 4985:2000 with latest amendments including transportation to destination, loading, unloading, placing and stacking with all lead and lift and as directed by Engineer in charge.90mm dia PVC repair Collar- 6 Kg/cm2
20
355
7118.6
... More
CODE-041 - Supplying PVC specials conforming to IS 4985:2000 with latest amendments including transportation to destination, loading, unloading, placing and stacking with all lead and lift and as directed by Engineer in charge. 75mm dia PVC repair Collar- 6 Kg/cm2
20
296
5932.2
... More
CODE-042 - Supplying PVC specials conforming to IS 4985:2000 with latest amendments including transportation to destination, loading, unloading, placing and stacking with all lead and lift and as directed by Engineer in charge.63mm dia PVC repair Collar- 6 Kg/cm2
20
190
3813.6
... More
CODE-043 - Supply of Grease
15
152
2288.1
... More
CODE-044 - Repair of C.I / D.I sluice valve check nut & spindle by filling brass material for providing new groove for easy operation of valves including removing the body of valve, lathe work and necessary tools and refixing complete. Dia 80mm to 200mm
10
2118
21186.4
... More
CODE-045 - Replacing burnt motor winding by new copper winding for 2 Nos of 65HP/ 48.5 KW induction motor of DWVT pumpset at jackwell at Kushalnagar as directed by the engineer-in-charge.
2
55084
110169.5
... More
CODE-046 - Replacing burnt motor winding by new copper winding for 2 Nos of 25HP/ 14.5 KW induction motor of Centrifugal pumpset at W.T.P at Kushalnagar as directed by the engineer-in-charge.
2
29661
59322.04
... More
CODE-047 - Replacing burnt motor winding by new copper winding for 1HP/ 0.75 KW motor for electro mechanical equipment at 1.5MLD & 2.27MLD W.T.P at Kushalnagar. The rate shall include transportation charges of motor, loading and unloading from work site to work shop and return to work site. The above rate shall include scrap value of burnt out winding wire as directed by the engineer-in-charge.
12
2966
35593.2
... More
CODE-048 - Supply of 40A/22 KW Contactor - TC1D4011U5 and 5A/250V AC/28V DC for 25HP C/F Starter at W.T.P with all lead and lift as directed by Engineer in charge.
6
4661
27966.12
... More
CODE-049 - Supply of 150A Contactor for 65HP DWVT Pumpset Starter at Jackwell cum Pumphouse with all lead and lift as directed by Engineer in charge.
2
17796
35593.22
... More
CODE-050 - Supply of 5A/250V AC/28V DC Resistive load A1D1 Timer for 25HP C/F & 65HP DWVT Starter at W.T.P & Jackwell with all lead and lift as directed by Engineer in charge.
3
1694
5084.76
... More
CODE-051 - Supply of 40A Phase failure relay for 65HP DWVT & 25HP C/F Starter at Jackwell and at W.T.P with all lead and lift as directed by Engineer in charge.
2
4237
8474.58
... More
CODE-052 - Repair and Reconditioning of 2Nos Of 25HP Centrifugal pumpset @ WTP with all lead and lift as directed by Engineer in charge.
2
23065
46130.5
... More
CODE-053 - Dismantling of motor both drive end and non drive end side. Removal of burnt winding and rewinding completely with pure electrolyte grade copper conductor of necessary guage. Applying epoxy gel coat over winding, reassembly of rotar with providing new ball bearings, reassembly of both drive and shields, refining coupling and erecting of motor including carrying out necessary alignment. Providing gland packing both coupling and baring on drive and non drive end side, reconditioning of roller , providing new ball bearings,welding , grinding and turning work of stainless steel ratches in motor along with locking pin re-commissioning with satisfaction running trial at the site, which includes all the inspection . The rate shall include transportation charges of motor, loading and unloading from work site to work shop and return to work site. The above rate shall include scrap value of burnt out winding wire with all lead and lift as directed by Engineer in charge. for 65 HP DWVT Pumpset motor at Jackwell.
1
55084
55084.8
... More
CODE-054 - Dismantling of motor both drive end and non drive end side. Removal of burnt winding rewinding completely with pure electrolyte grade copper conductor of necessary guage. Applying epoxy gel coat over winding, reassembly of rotar with providing new ball bearings on both drive end and non drive end sides, reassembly of both drive and shields, refining coupling and erecting of motor including carrying out necessary alignment. Providing gland packing both coupling and baring on drive and non drive end side, reconditioning of roller , welding , grinding and turning work of stainless steel ratches in motor along with locking pin re-commissioning with satisfaction running trial at the site, which includes all the inspection . The rate shall include transportation charges of motor, loading and unloading from work site to work shop and return to work site. The above rate shall include scrap value of burnt out winding wire with all lead and lift as directed by Engineer in charge.For 25 HP Centrifugal Pumpset motor at WTP pumphouse.
1
29661
29661.02
... More
CODE-055 - Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selected earth, and all other ancillary operations complete with all lead lifts as directed by the engineer-in-charge
1900
68
129200
... More
CODE-056 - Hiring 2 Nos of 6000 litres capacity Water tankers to supply water to Kushalnagar Town from Borewell source due to temporary shut down of water supply from River Cauvery during summer (Very meager flow) and during flooding of River Cauvery at Headworks site (Submergence of Headworks site and duly maintaining the records of water supply to areas, log books and rate includes Hire charges, Fuel charges, Crew charges, Over head charges and Tools & Plants (T&P) as directed by Engineer in charges with all lead and lift.
864
725
626400
... More
CODE-006 - Supplying of Poly Aluminium Chloride (PAC) - Coagulant agent to Kushalanagara Treatment plant required for treatment of water for 8 Months. The rate is inclussive of transportation, loading, unloading, stacking charges with all lead and lift as directed by Engineer in charge.
3300
53
174900
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements