Karnataka State Small Industries Development Corporation Tender

code04 - Construction of Granular SubBase of required grading as perdesign spreading in uniform layers with motor grader onprepared surface mixing by mix in place method with front endloader at OMC and compacting with vibratory roller to achievethe desired density complete as per clause 401 For Grading I Material By Mix in Place Method ---- As per tender document

code05 - Dry Lean Cement Concrete Sub base Construction of dry lean cement concrete Sub base over a prepared subgrade with coarse and fine aggregate conforming to IS 383 the size of coarse aggregate not exceeding 25 mm aggregate cement ratio not to exceed 151 aggregate gradation after blending to be as per table 6001 cement content not to be less than 150 kg m3 optimum moisture content to be determined during trial length construction concrete strength not to be less than 10 Mpa at 7 days mixed in a batching plant transported to site laid with a paver with electronic sensor compacting with 810 t vibratory roller finishing and curing ---- As per tender document

code06 - Providing and laying 150 micron Low Density Polyethylene LDPE sheet confirming to IS 3395 1997 below concrete pavement including all materials and labour complete ---- As per tender document

code07 - Plain Cement Pavement Quality M30 grade Concrete RMCwith OPC and GGBS laid without PaverConstruction of unreinforced plain cement concrete pavementusing RMC M30 grade with OPC 270 kgm3 and GGBS 90kgm37525 proportion as per approved mix design procedureand thickness as per design over a prepared sub base The superplastisiser confirming to IS 91031999 Reaffirmed2008 Coarse aggregates and Fine aggregate confirming to IS3832016 transported to site laid in approved fixed side form work steelchannel laying and fixing of 125 micron thick polythene filmwedges steel plates including levelling the form work Spreadingthe concrete with shovels rackers and compacted using needlesuitable plate vibrator and finished in a continuous operation including provision of separation membrane and Hessian cloth finishing to lines and grades complete including cost of all materials labour all lead and lift loading charges as per specification and direction of Engineer incharge of the work Groove cutting shall be paid seperately ---- As per tender document