Karnataka State Pollution Control Board Tender

NB_04 - 56 inch (1422) sink cabinet with 2 shutter with SS 304 Hinges anId SS 304 Handles Sink 2S56. The work should be executed as per detailed Technical Specification.

NB_05 - Providing and fixing Back Cover Panel, End Cover Panel, Front Filler Panel, panel Leg & Support Panel for Cabinets and leg Space. Apron with Front Notch A 30W end Filler Panel A IB 12W Technical Specification

NB_06 - Tall cabinet: - Lab Cabinets standing specification same as above for Providing and installing Tall storage cabinet approximate size 30 Wx 22D x 84H with slot to fix the shelves in different position, made in powder coated CRCA MS sheet of 0.8mm thicness powder coating shall be of approved colour and 45 - 50 microns thickness and shall pass through a salt spary test of 1000 hours and have a minimum scratch hardness of 3 kgs . The Unit shall be mounted on levelling screws to accomodate any variation / undulations in the finished floor , the work should be executed as per detailed technical specification

NB_07 - Sinks: The sinks should be injection molded from stainless steel is choosen to have very high resistance to attack from a wide range of chemicals and the ability to withstand temperatures upto 100 deg C. The impact resistance should be high which will minimize damage during and after installation. The sinks should be with self draining base and should be suitable for mounting on top or underside of the work benches. The sinks should be compatible to a vast no of acids, alkalis and reagents. This sinks shall have bottle trap with reducing coupler of size of one foot length. the bottle trap shall be of laboratory grade steel unless otherwise specified, Overflows shall not be furnished for sink outlets unless specifically mentioned Size 530x370x220.

NB_08 - Water Taps - 3-way brass goose necked type: All faucets and valves for water service shall have a renewable unit containing all working components subject to wear, including a stainless steel replaceable seat and an integral adjustable volume control (designated by the suffix "AC") . The renewable unit shall be interchangeable among all faucets and valves for water service. The unit shall be capable of being readily converted from compression to self closing and vice versa without disturbing the faucet body. The unit shall be chemical resistant and built as per DIN 12918 having maximum working pressure of 10 bar. Goosenecks shall have a seperate outlet coupling with a 3/8" IPS female thread securely brazed to the goose neck for attachment of seperated hose ends, aspirators and other outlets.

NB_09 - Peg boards on sink: Acrylic transparent (10mm thick) or Stainless steel peg board with black colored pegs having a drip tray and flexible tube of at least 600 mm Length to drain the excess liquid from glass wares to sink. Pegboards shall be fixed on wall or on furniture at accessible height as per drawings and prevalent site situation. Size of peg board as per manufacturer's specs or SS pegboard with SS pegs. The work should be executed as per detailed Technical Specification.

NB_10 - Providing and fixing Granite Worktops shall be 18+/- 1mm Jet black Granite of a even surface and the level of tolerance less than 1mm. The front edge of the granite shall be chamfered at an angle of 28 deg and smoothened. The back splash for the wall bench shall be granite 18/19mm thick material for an height of 4" from the finished table top level.

NB_11 - Providing and fixing Anti-Vibration Table Finish of Top matching to lab table top. Approximate Size:900mm L x 900mm D x 900mm H and having 2 nos. of 5/15 amps switch and sockets. Trunking to be extended from edge to edge. The top will be 18+1 mm thk and supported by fixed legs and having adjustable leveling screws. The work should be executed as per detailed Technical Specification

NB_12 - Providing and commissioning of Bench Fume Hood in locations as indicated in the drawing and as specified in attached document all necessary water inlet, waste outlet, power sockets, gas connections, compressed air connections etc.,complete as per attached detailed The work should be executed as per detailed Technical Specification.

NB_13 - Providing and fixing of suitable size of 18", 22", 30" 36" or suitable cabinet with 1 drawer / 2 drawer 2 shutter and 1 shutter with telescopic channel inside along with SS 304 hinges and SS 304 handle with adjustable shelves inside below mentioned item of works., do- HARDWARE PACKET FOR FLOOR UNITS

NB_14 - BLOWER - Providing and fixing of PP Blower 2 HP with DOL Starter,Electrical works and Stand including errection testing and commissioning in existing site/position to fume hood. The work should be executed including required all necessary civil works.

NB_15 - Ducting for 2nos. 4ft fume hoods : Providing and fixing PP + FRP Ducting Material to Fume hoods including all required items to finishing and commissioning of Fume hoods. The work should be executed including required all necessary civil works

NB_16 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010. 1.5Sqmm in existing PVC Conduit.

NB_17 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010. 2.5 Sq.mm

NB_18 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010. 4 Sq.mm

NB_19 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010. 6 Sq.mm

NB_20 - SWITCHES, SOCKETS & ACCESSORIES: Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 3 Way

NB_21 - Providing fixing Race way to second floor Lab

NB_22 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module

NB_23 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module

NB_24 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket.

NB_25 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch.

NB_26 - Removing Cassete type Air conditioner.

NB_27 - Installation charges for split type/Cassette air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.

NB_28 - upplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube. Split

NB_29 - Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame. Curved surfaces.

NB_30 - Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size (24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge

NB_31 - Providing and fixing of 3 - track x 2 - panel sliding windows made out of multi chambered UPVC ( Maching to RAL - 9016 ) section and with minimum Ti02 ( Titanium Dioxide ) at 6PHR with TPE ( Thermo plastic Elastomer ) and lead free, gasket - grey colour having isolated drainge and rein forced with Galvanized iron profile through - out the Window frame. The outer frame having an overall size of 108mm width x 450mm height with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with GI reinforceement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bed for fixing of glass shall be of size 20mm x 24 mm, Windows shall be provided with 6mm plain float glass, standard hardware & Multi point locking system witrh touch lock. Wall thickness of frame & sash shall be of 2mm - 2.5mm maximum possible Size - 2419 mm x 2200 mm. ( The cost is incluive of all fixtures and separate charge for minor T&P's shall not be made) complete as per specifications.

NB_32 - Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per specifications.

NB_33 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life)

NB_34 - Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engineer in charge.

NB_35 - Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete 4kVA Capacity

NB_36 - Buy back of aluminium window scrap