Karnataka State Pollution Control Board Tender

004 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Pg No.50 It No.8.51 SR 2023-24)

005 - Dismantling tile work in floors and roofs laid in cement mortar includ ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 mm. (Pg No.165 It No.19.22.1 SR 2023-24)

006 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (Pg No.15 It No.2.1.4, SR 2023-24)

007 - Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of Tile 600x600 mm (Pg No.62 It No.9.22.2 SR 2023-24)

008 - Providing and fixing Veneer paneling, over the 50mm x 35mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the wall and top covered out of 4mm thick approved quality Veneer, fixed over 12mm thick ply of approved brand, termite and water resistant, finished with melamine polish, complete including cost and conveyance of all materials, labour for all items of work HOM etc., complete as per specification. (PW, P & IWTD, SR, 2018-19, P.No-324, I.No-39.1)

009 - STRAIGHT WORKSTATION(Frame)Providing and fixing STRAIGHT WORKSTATION (Frame)consisting of back to back unit made out of 75 mm thick MS CRCA powder coated,tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm W) and one soft board (600 mm W) per workstation, Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway- one middle raceway (600mm W) below table top per workstation and continous raceway at the skirting level, Wire manager- ABS plastic grommet one number per table,Table top - 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straightedge bound Hardware-M powder coated corner bkt,cantilever bkt,separator hook on bkt, L bktand Table joint plate., as per specifications, drawings and as directed by Engineer in charge (SR, 2018-19, P.No-333, I.No-39.15.4)

010 - Mobile pedestal unit - METAL : Providing and fixing (450mmw x 450 mmd x 685 mmht) mobile pedestal unit - metal with MS CRCA sheet powder coated for body, Two equal drawer and one filling drawer with centralized locking system, Telescopic channels, castors, handles and lock etc., complete as per specifications drawings and as directed by engineer in charge. (SR, 2018-19, I.No-39.26, P.No-336)

011 - Providing and fixing of conference table of size 4572mm x 1676.40mm with made up with 20mm thick +20mm thick (20mm +20mm) block commercial plywood with approved shade of veneer of 4mm thick on table surface with all round beachwood beading fixing with required adhesive materials nails cutting required size and fixing the same. The table shall consists of cable way with suitable materials. The work should be finished with 2 coats of melamine polishing and beachwood beading shall be polished with 2 coats of melamine polish. The Melamine polished shall be done with suitable melamine including all required materials , transport including lead and lift charges and the work should be done as per directions of Engineer in charge. This Office work order number PCB/22/BLD/2020-21/3877, dated: 09.12.2020. Approved rate =Rs.1,88,000.00

012 - Providing and fixing storage unit of 0.75m depth made out of 19mm thick commercial ply vertical support finished in approved 1.00mm laminate with 12mm thick ply packing internally finished with enamel paint of approved colour and shade shelves shall be formed out of 19mm ply finished with enamel paint of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.00mm thick laminate of approved shade and colour etc., complete the rate includes cost of all materials, labour charges, complete as per specification (PW, P&IWTD,SR, 2018-19, I.No-39.4, P.No-324)

013 - Providing and supplying of Chair: The seat is Medium Back and is made up of AN 70 Mesh, back with head rest with one way adjustable arms, fabric upholstered cushion seat, adjustable lumbar support, qauality is nylon base. Featherlite make and Model.name Amaze Medium Back Mesh Chair. Market rate as on date: 13.04.2023 is Rs.9,949.00 through official featherlite website.

014 - Providing and supplying of Chair: The seat is High Back and is made up of Micro Linear Mesh chair, Fabric Upholstered cushion seat, multilock with seat sliding mechanism, adjustable lumbar support, four way adjustable arms, nylon base with 60mm PU castors. Featherlite make and Model name Helix High Back Mesh Chair. Market rate as on date: 15.04.2023 is Rs.26,999.00 through official featherlite website.

015 - Supplying of recess mounting non integrated type LED down light 10-12 W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 10-12W. (Ele SR 2023-24 Pg No.44, It No.11.4.2)

016 - Supplying of recess mounting non integral type 34 to 36 LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2x2 36 W (Ele SR 2023-24 Pg No.45, It No.11.6.3

017 - Open Conduit System: Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25 mm dia 2 mm thick (Ele SR 2023-24 Pg No.02, It No.1.1.2)

018 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest mendments. 2.5 mm2 (Ele SR 2023-24 Pg No.03, It No.2.3.3)

019 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest mendments. 4.0 mm2 (Ele SR 2023-24 Pg No.03, It No.2.3.4)

020 - Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch (Ele SR 2023-24 Pg No.03, It No.2.1.3)

021 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS 694:2010. 4C x 4 mm2 (Ele SR 2023-24 Pg No.04, It No.2.5.16)

022 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module (Ele SR 2023-24 Pg No.05, It No.3.5.5)

023 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket. (Ele SR 2023-24 Pg No.05, It No.3.6.10)

024 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6. (Ele SR 2023-24 Pg No.05, It No.3.6.12)

025 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP (Ele SR 2023-24 Pg No.13, It No.5.18.4)

026 - Supply erection, testing, commissioning of Cassette type splitAir conditioners suitable for operation on single/three phaseAC supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run relay andover load protection, one ceiling mounted indoor unit and one out door condenser unit including standard accessories covered with insulation tube including battery operated cordless unit. 2.0 TR Cassette 1 Ph. (Ele SR 2023-27 Pg No.31, It No.6.9.1)

027 - Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries. (Ele SR 2023-24 Pg No.25, It No.6.22)

028 - Supply, installation of 5/8" and 7/8" Hard drawn refrigerant pipe and insulation suitable for 11TR duct able split Air Conditioner. (Ele SR 2023-24 Pg No.25, It No.6.24)

029 - Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgs/sq.cm working pressure of outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specifications. Specification No.KBS 13.2.15.1 / 13.9 for internal water supply connection. - do - 25 mm dia. (Civil SR 2018-19 Pg No.95, It No.13.67)

030 - Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to matchthe existing wall or brackets, with bolts and nuts and a 5 A,ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. (Ele SR 2023-24 Pg No.57, It No.13.13)

031 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. (Ele SR 2023-24 Pg No.56, It No.13.5)

032 - Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270V input and load to full load with over load protection, spike suppression, operating at 00C to 400 C. Range etc., complete. 4kVA Capacity. (Ele SR 2023-24 Pg No.29, It No.9.1.2)