Karnataka State Police Housing And Infrastructure Development Corporation Limited Tender

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 50mm nominal OD pipes ---- as per directions of engineer in charge of work.

KSRB13-6.3-5 : Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) 40mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.6 / 13.3 ---- as per directions of engineer in charge of work.

KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22 ---- as per directions of engineer in charge of work.

Earth work excavation for foundation of structures by mechanical means as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising / transporting the remaining earth locally upto 1.00km lead. (Depth upto 3.00 Mts) -In all types of soil ---- as per directions of engineer in charge of work.

Earth work excavation for foundation of structures by mechanical means as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising / transporting the remaining earth locally upto 1.00km lead. (Depth upto 3.00 Mts) -In all types of soil ---- as per directions of engineer in charge of work.

KSRB 4-1.7 : Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220kgs, with 20mm and down size graded granite metal coarse aggregates @0.84cum and fine aggregtes @ 0.56cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2 ---- as per directions of engineer in charge of work.

KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 ---- as per directions of engineer in charge of work.

KSRB 4.2.8: Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles, and beams retaining walls, return walls, walls (any thickness) including attached plasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 ---- as per directions of engineer in charge of work.

KSRB 4-6.1 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons. Specification No. KBS 4.6.2 ---- as per directions of engineer in charge of work.

KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- as per directions of engineer in charge of work.

KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm including cost of all materials, labour complete as per Specification. Specification No. KBS 4.6.2 ---- as per directions of engineer in charge of work.

KSRB15-3.11 : Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. ---- as per directions of engineer in charge of work.

KSRB15-4.1 Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers, for cement mortar 1:3, 12mm thick cost of materials complete as per specifications. ---- as per directions of engineer in charge of work.

KSRB15-3.14 : Providing 12mm thick cement plaster in single coat with cement mortar 1:4, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. ---- as per directions of engineer in charge of work.

KSRB15-4.1 Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers, for cement mortar 1:3, 12mm thick cost of materials complete as per specifications. ---- as per directions of engineer in charge of work.

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500 ---- as per directions of engineer in charge of work.

Providing & fixing 60x60 cms MS inspection Door with necessary M S frame made out of M S angle 50X50X6 mm and M S shutter of 31.5mm of B G 10 thick with hinges on top and locking arrangements painting etc complete as specification. including all lead, lifts, loading, unloading & HOM charges etc., complete as per specification & direction of Engineer in-charge of work. For Alawandi-2.00 Nos, Yelburga-2.00 Nos, Gangavathi-2.00 Nos, Karatagi-2.00 Nos & Kanakagiri-2.00 Nos ---- as per directions of engineer in charge of work.

Providing & fixing MS ladder 45cm wide with 65X65X6mm sized angle iron and 20mm M S Bars at 25cm centre to centre with necessary supports as directed and angle iron of same section at braces including fixing in ground with C C 1:2:4 bed and 2 coats of non poisonous anticorrosive bituminous paint as directed (including inserting in the angle iron and welding ) outside including all lead, lifts, loading, unloading & HOM charges etc., complete as per specification & direction of Engineer in-charge of work. For Alawandi-4.00 Mtrs, Yelburga-4.00 Mtrs, Gangavathi-4.00 Mtrs, Karatagi-4.00 Mtrs & Kanakagiri-4.00 Mtrs ---- as per directions of engineer in charge of work.

Geo physical investigation of site for sinking of bore well for supplying drinking water to habitation either through the hand pump; MWS or. By vertical eletrical sounding by adapting venner or Schlumberger's method, including reconniassance survey of geological formations, geophysical investigation of existing ground water in the vicinity, indicating the location of site, recommended depth of casing pipe required to seal the top unconsolidated formation including and extra depth of 1 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of acquifer proposed to be taped, Probable yeild and other information required including transportation of instruments and accessories to works site, engaging technical personnel and lasbour required etc., PRE SR 2012-13 including all lead, lifts, loading, unloading & HOM charges etc., complete as per specification & direction of Engineer in-charge of work. For Basapura-2.00 Job, Alawandi-2.00 Job, Yelburga-2.00 Job, Gangavathi-2.00 Job, Karatagi-2.00 Job, Kanakagiri-2.00 Job & Tavaragere-2.00 Job. ---- as per directions of engineer in charge of work.

Sinking Bore well of 165 mm dia, clear using fast rig in the starata including over burden upto 20m. Fixing of casing pipes, collars, and cap with necessary cutting and threading including transportation of rig and supporting vehicle. New charges and threading including transportation of rig and supporting vehicle. Crew charges and cost of consumables, etc., complete including yield testing @ the final depth with a minimum working of compressor for one hour ( Excluding cost of casing pipes, collars and cap). PRE SR 2012-13 including all lead, lifts, loading, unloading & HOM charges etc., complete as per specification & direction of Engineer in-charge of work. For Basapura-100.00 Mtrs, Alawandi-100.00 Mtrs, Yelburga-100.00 Mtrs, Gangavathi-100.00 Mtrs, Karatagi-100.00 Mtrs, Kanakagiri-100.00 Mtrs & Tavaragere-100.00 Mtrs - upto 50mtrs depth ---- as per directions of engineer in charge of work.

Sinking Bore well of 165 mm dia, clear using fast rig in the starata including over burden upto 20m. Fixing of casing pipes, collars, and cap with necessary cutting and threading including transportation of rig and supporting vehicle. New charges and threading including transportation of rig and supporting vehicle. Crew charges and cost of consumables, etc., complete including yield testing @ the final depth with a minimum working of compressor for one hour ( Excluding cost of casing pipes, collars and cap). PRE SR 2012-13 including all lead, lifts, loading, unloading & HOM charges etc., complete as per specification & direction of Engineer in-charge of work. For Basapura-100.00 Mtrs, Alawandi-100.00 Mtrs, Yelburga-100.00 Mtrs, Gangavathi-100.00 Mtrs, Karatagi-100.00 Mtrs, Kanakagiri-100.00 Mtrs & Tavaragere-100.00 Mtrs - upto 50mtrs depth ---- as per directions of engineer in charge of work.

Sinking Bore well of 165 mm dia, clear using fast rig in the starata including over burden upto 20m. Fixing of casing pipes, collars, and cap with necessary cutting and threading including transportation of rig and supporting vehicle. New charges and threading including transportation of rig and supporting vehicle. Crew charges and cost of consumables, etc., complete including yield testing @ the final depth with a minimum working of compressor for one hour ( Excluding cost of casing pipes, collars and cap). PRE SR 2012-13 including all lead, lifts, loading, unloading & HOM charges etc., complete as per specification & direction of Engineer in-charge of work. For Basapura-100.00 Mtrs, Alawandi-100.00 Mtrs, Yelburga-100.00 Mtrs, Gangavathi-100.00 Mtrs, Karatagi-100.00 Mtrs, Kanakagiri-100.00 Mtrs & Tavaragere-100.00 Mtrs - upto 50mtrs depth ---- as per directions of engineer in charge of work.

Providing & fixing 160 mm dia PVC casing pipe including cost of materials, labour charges, HOM of equipments and testing complete as per specification and direction of engineer in charge of work. Sinking Bore well of 165 mm dia, clear using fast rig in the starata including over burden upto 20m. Fixing of casing pipes, collars, and cap with necessary cutting and threading including transportation of rig and supporting vehicle. New charges and threading including transportation of rig and supporting vehicle. Crew charges and cost of consumables, etc., complete including yield testing @ the final depth with a minimum working of compressor for one hour ( Excluding cost of casing pipes, collars and cap). PRE SR 2012-13 including all lead, lifts, loading, unloading & HOM charges etc., complete as per specification & direction of Engineer in-charge of work. For Basapura-72.00 Mtrs, Alawandi-72.00 Mtrs, Yelburga-72.00 Mtrs, Gangavathi-72.00 Mtrs, Karatagi-72.00 Mtrs, Kanakagiri-72.00 Mtrs & Tavaragere-72.00 Mtrs. ---- as per directions of engineer in charge of work.

Providing & fixing MS CASING COLLARS PRE 2012-13 Sinking Bore well of 165 mm dia, clear using fast rig in the starata including over burden upto 20m. Fixing of casing pipes, collars, and cap with necessary cutting and threading including transportation of rig and supporting vehicle. New charges and threading including transportation of rig and supporting vehicle. Crew charges and cost of consumables, etc., complete including yield testing @ the final depth with a minimum working of compressor for one hour ( Excluding cost of casing pipes, collars and cap). PRE SR 2012-13 including all lead, lifts, loading, unloading & HOM charges etc., complete as per specification & direction of Engineer in-charge of work. For Basapura-12.00 Nos, Alawandi-12.00 Nos, Yelburga-12.00 Nos, Gangavathi-12.00 Nos, Karatagi-12.00 Nos, Kanakagiri-12.00 Nos & Tavaragere-12.00 Nos. ---- as per directions of engineer in charge of work.

Providing & fixing MS CASING CAPS PRE SR 2012-13 Sinking Bore well of 165 mm dia, clear using fast rig in the starata including over burden upto 20m. Fixing of casing pipes, collars, and cap with necessary cutting and threading including transportation of rig and supporting vehicle. New charges and threading including transportation of rig and supporting vehicle. Crew charges and cost of consumables, etc., complete including yield testing @ the final depth with a minimum working of compressor for one hour ( Excluding cost of casing pipes, collars and cap). PRE SR 2012-13 including all lead, lifts, loading, unloading & HOM charges etc., complete as per specification & direction of Engineer in-charge of work. For Basapura-2.00 Nos, Alawandi-2.00 Nos, Yelburga-2.00 Nos, Gangavathi-2.00 Nos, Karatagi-2.00 Nos, Kanakagiri-2.00 Nos & Tavaragere-2.00 Nos. ---- as per directions of engineer in charge of work.