Karnataka State Police Housing And Infrastructure Development Corporation Limited Tender

Cleaning RCCsump tanks and RCC overhead tanks with mechanical dewatering including removal of sludge, mud, dirt, algea etc and cleanuing the wall surface of tanks using high pressure jet, vacuum cleaning and spraying anti bacterial treatment to the wall and ceiling surfaces and UV treatment, including removing of sludge etc., using suitable coconut broomstick, squeesers / wipers / rubber brushes, coir brushes, plastic buckets, mugs, dewatering using motor with portal arrangement, hose pipe etc., complete including all safety measures. ---- as per directions of engineer incharge of work.

Geophysical investigation of site for sinking Bore well for supplying drinking water to the Habitation either through the hand pump, MWS, PWS by vertical electrical sounding by adopting veneer or Schlumberger's method, including reconnaissance survey of Geological formation, Geophysical investigation of existing ground water in the vicinity, indicating the location of site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 Mtrs in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instrument and accessories to work site, engaging technical personnel and labour required etc., with all lead, lifts, loading and unloading hiring of machinery charges and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and directions of the Engineer in-charge of the work. ---- as per directions of engineer incharge of work.

Sinking bore well of 165 mm dia clear using fast rig in all strata including over burden up to 20 M, fixing of casing pipes, collars and cap with necessary cutting & threading including transportation of rig and supporting vehicle crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, Collars & Cap) with all lead, lifts, loading and unloading hiring of machinery charges and all other incidental charges required for successful completion of work as per approved specification,designs,drawings etc,. complete and directions of the Engineer in-charge of the work. - 1. 0.00 to 50.00 mtrs ---- as per directions of engineer incharge of work.

Sinking bore well of 165 mm dia clear using fast rig in all strata including over burden up to 20 M, fixing of casing pipes, collars and cap with necessary cutting & threading including transportation of rig and supporting vehicle crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, Collars & Cap) with all lead, lifts, loading and unloading hiring of machinery charges and all other incidental charges required for successful completion of work as per approved specification,designs,drawings etc,. complete and directions of the Engineer in-charge of the work. 2. 50.00 mtrs to 100.00mtrs ---- as per directions of engineer incharge of work.

Sinking bore well of 165 mm dia clear using fast rig in all strata including over burden up to 20 M, fixing of casing pipes, collars and cap with necessary cutting & threading including transportation of rig and supporting vehicle crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, Collars & Cap) with all lead, lifts, loading and unloading hiring of machinery charges and all other incidental charges required for successful completion of work as per approved specification,designs,drawings etc,. complete and directions of the Engineer in-charge of the work.- 3. 100.00 to 150.00 mtrs ---- as per directions of engineer incharge of work.

Sinking bore well of 165 mm dia clear using fast rig in all strata including over burden up to 20 M, fixing of casing pipes, collars and cap with necessary cutting & threading including transportation of rig and supporting vehicle crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, Collars & Cap) with all lead, lifts, loading and unloading hiring of machinery charges and all other incidental charges required for successful completion of work as per approved specification,designs,drawings etc,. complete and directions of the Engineer in-charge of the work.4. 150.00 to 200.00 mtrs ---- as per directions of engineer incharge of work.

Sinking bore well of 165 mm dia clear using fast rig in all strata including over burden up to 20 M, fixing of casing pipes, collars and cap with necessary cutting & threading including transportation of rig and supporting vehicle crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, Collars & Cap) with all lead, lifts, loading and unloading hiring of machinery charges and all other incidental charges required for successful completion of work as per approved specification,designs,drawings etc,. complete and directions of the Engineer in-charge of the work. 5. 200.00 mtsr to 250.00 mtrs ---- as per directions of engineer incharge of work.

Earthwork excavation for connecting pipe line and disposing the excavated stuff as per directions of the department including providing barricading, danger lighting, shoring, strutting and bailing out water wherever necessary up to 1.5 mtrs depth in all soils in hard murrum under water situation. with all lead, lifts, loading and unloading hiring of machinery charges and all other incidental charges required for successful completion of work as per approved specification,designs,drawings etc,. complete and directions of the Engineer in-charge of the work. ---- as per directions of engineer incharge of work.

Refilling the excavated stuff in layers of 15 cms thick including watering and consolidation etc., complete with an initial lead of 50 mtrs with all lead, lifts, loading and unloading hiring of machinery charges and all other incidental charges required for successful completion of work as per approved specification,designs,drawings etc,. complete and directions of the Engineer in-charge of the work ---- as per directions of engineer incharge of work.

Supply of ISI MARK - 165 mm dia Casing Pipe nominal bore:- Casing pipe Supply of ISI MARK - 165 mm dia Casing Pipe nominal bore plain end steel casing pipe - Grade of Steel Fe 410 of wall thickness 5.4 mm thick Conforming to IS 4270 - 2001 and latest amendments electric resistance welded steel tube material and Conforming to IS 1387 / 1993 & manufactured by basic Open hearth electric or basic Oxygen Process in random length of 4 to 7 mtrs. both a socket Conforming to IS 4270 : 2001 and the other end with screwed pipes. All pipes shall be reasonably free from defects. The tubes shall be reasonable straight, should be with ISI marking, weighing 21.10 kg/mtr prices include Collar - medium Duty with all lead and lift and as per the directions of the Engineer-in-charge 1. Casing Pipes ---- as per directions of engineer incharge of work.

Supply of ISI MARK - 165 mm dia Casing Pipe nominal bore:- Casing pipe Supply of ISI MARK - 165 mm dia Casing Pipe nominal bore plain end steel casing pipe - Grade of Steel Fe 410 of wall thickness 5.4 mm thick Conforming to IS 4270 - 2001 and latest amendments electric resistance welded steel tube material and Conforming to IS 1387 / 1993 & manufactured by basic Open hearth electric or basic Oxygen Process in random length of 4 to 7 mtrs. both a socket Conforming to IS 4270 : 2001 and the other end with screwed pipes. All pipes shall be reasonably free from defects. The tubes shall be reasonable straight, should be with ISI marking, weighing 21.10 kg/mtr prices include Collar - medium Duty with all lead and lift and as per the directions of the Engineer-in-charge 2. Collar ---- as per directions of engineer incharge of work.

Supply of ISI MARK - 165 mm dia Casing Pipe nominal bore:- Casing pipe Supply of ISI MARK - 165 mm dia Casing Pipe nominal bore plain end steel casing pipe - Grade of Steel Fe 410 of wall thickness 5.4 mm thick Conforming to IS 4270 - 2001 and latest amendments electric resistance welded steel tube material and Conforming to IS 1387 / 1993 & manufactured by basic Open hearth electric or basic Oxygen Process in random length of 4 to 7 mtrs. both a socket Conforming to IS 4270 : 2001 and the other end with screwed pipes. All pipes shall be reasonably free from defects. The tubes shall be reasonable straight, should be with ISI marking, weighing 21.10 kg/mtr prices include Collar - medium Duty with all lead and lift and as per the directions of the Engineer-in-charge 3. Cap 9 Each 29 95 2755 Prepare LBD ---- as per directions of engineer incharge of work.