Karnataka State Law University Tender

004 - Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

005 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

006 - Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Plinth Beams of Buildings including cost of all materials, labour complete as per specificaitons. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

007 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

008 - Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

009 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

010 - Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for RCC Beams, Lintels & Troughs of Aqueducts including cost of all materials, labour complete as per specificaitons. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

011 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement for Buildings, including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

012 - Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

013 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

014 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. For Area of slab over 0.50 m2 ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

015 - Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

016 - Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

017 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

018 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

019 - Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

020 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

021 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

022 - Providing and fixing factory made single extruded WPC Size 62 x 100mm (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

023 - Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded 30 mm thickness WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

024 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge, For SS Aldrop 16mm dia, 300mm ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

025 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge, For SS Handles 200mm ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

026 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge, For SS Tower Bolts 200x10mm ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

027 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

028 - Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

029 - Providing and fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL-9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

030 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

031 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

032 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, of 32 mm nominal dia Pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

033 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, of 15 mm nominal dia Pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

034 - Providing and fixing Sewer (SWR) pipes, of 110mm nominal dia pipes including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

035 - Providing, fabricating, assembling and fixing in position aluminium partitions Using sections in combination of plain, single grove and double grove as per reqirements for the frames of overall size 101.6 mm X 44.45mm, 3.81mm. thick having section weight, plain sections 2.40 kg/m single grove section 2.54 1kg/m. and double grove section 2.683 kg/m and bottom member 114.3mm x 44.45 mm 3.18 mm thick and 2.6 46 kg/m; aluminium lowers of size 77.6 mm x 27.6mm 1.7 mm Section weight 0.483 Kg, bottom portion provided with 12mm thick pre laminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and revited to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C. columns or masonry on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9 m. from floor level; and 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panels with lower sections, the glass and panels fitted with glazing clips of 19mm x 17.3 mm with thickness of 0.9mm. weight 0.124 kg/m; aluminium sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door opening) All the frame should be thoroughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complere as per specifications. Using aluminium section powered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

036 - Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

037 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

038 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Stainless Steel AISI-304(18/8 Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

039 - Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

040 - Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450 mm) ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

041 - Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5A. Ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

042 - Supplying 400 mm Sweep wall mounting fan suitable to operate at single- phase 230v AC. supply. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

043 - Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15 mm dia MS rod, with 5A. ceiling rose of approved quality with necessary length of 23 / 0.007 6inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

044 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular bricks of class designation 3.5 ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

045 - Providing and fixing Sewer (SWR) pipes of 150mm nominal dia pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

046 - Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to achieve final desired compaction & setting of paver to its final level , including cost of materials, labour and usage charges of machinery complete as per specifications. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

047 - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

048 - Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 t smooth wheeled roller, complete as per clause 310. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

049 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

050 - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer incharge. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

051 - Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of materials, labour, complete as per specifications. ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

052 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.

053 - Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge ---- complete including all lead and lifts, material, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as per standard specifications and drawings and as per the direction of Engineer in charge of the work.