Karnataka Solar Power Development Corporation Limited Tender

DR - Providing Glass Coffee Table as per the dirctions of the Engineer incharge, Material & Subtype Glass - Tempered Glass Colour & Colour Family Brown - Oak Dimension (W)1195mm X (D)650mm X (H)450mm Finish Glossy Size Standard Assembly Type Knock Down SKU- GROVE HSN Code -94031010 [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make-Durian or equivalent

DR - Supply & fixing of privacy PVC frosted Glass film of 120 to 150 micron with self adhesiveness, Make 3M [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Decorative Idols using Brass Material for entrance of required size and design as per the directions of engineering in charge[Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] (idol height 3 Feet)

DR - Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/ shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.[Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Providing mid back chairs as per the dirctions of the Engineer incharge, Material & Subtype Fabric Colour & Colour Family Black Dimension (W)580mm X (D)680mm X (H)1170mm Mechanism Synchro Single Locking Seating Capacity 1 Seater Maximum Seating Height 580 Function Revolving,Pneumatic Height Lift,Tilt Tension Control Finish Matte Size Standard Style Contemporary Assembly Type Knock Down SKU 70019/MB/STANDARD [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]Make-Durian, Featherlite or equivalent.

DR - Providing High back chairs as per the dirctions of the Engineer incharge, Material & Subtype Mesh - Fabric Colour & Colour Family Black Dimension (W)630mm X (D)675mm X (H)1300mm Mechanism Self Weight Multi Locking Seating Capacity 1 Seater Maximum Seating Height 545 Function Revolving,Pneumatic Height Lift Finish Matte Size Standard Style Contemporary Assembly Type Knock Down SKU NATURE-I/HB/PREMIUM HSN Code 94013000 [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make-Durian, Featherlite or equivalent

DR - Providing Visitors chairs as per the dirctions of the Engineer incharge, 01 Fabric Chair Material Group CONTFBC Model Series Name Contract 01 Primary Material Fabric Secondary Material Steel DIMENSIONS Width (cm) 50 Height (cm) 76.5 Weight (Kg) 2 Depth (cm) 57.5 [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make-Durian, Featherlite or equivalent

DR - Providing and fixing of Lacqured glass cladding to the walls at selected area as per the details given includes necessory hardware and screws for fixing -as per the direction of Engineer in charge of the work. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Supplying of decorative service trolley as per the directions and selection by the Engineer-In Charge of work ,[Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make- Royaloak/ikea/pepperfry/urbanladder or equivalent

DR - Supplying & installation of Wall art/decorative mirror/decorative wall shelves/decorative ethnic art/decorative wall painting/ decorative photo frames per the directions and selection by the Engineer-In Charge of work [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make- Royaloak/ikea/pepperfry/urbanladder or equivalent

22.22 - Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engineer in charge [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

39.4 - Providing and fixing storage unit of 0.75m depth made out of 19mm thick commercial ply vertical support finished in approved 1.00mm laminate with 12mm thick ply packing internally finished with enamel paint of approved colour and shade shelves shall be formed out of 19mm ply finished with enamel paint of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.00mm thick laminate of approved shade and colour etc., complete the rate includes cost of all materials, labour charges, complete as per specification - 3 &6 Feet Height Storage [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Providing Stainless steel dust bins of 120 litre capacity with revolving head as per the directions of engineering inchage [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

39.3 - Manufacturing, supplying and fixing wooden ward robe/ storage unit of 0.60m deep using 19mm thick vinyl bonded water proof block board, shutters allround ward robe/storage units, locakble dowers with sliding channels, cupboard drapery hangers, curtain rods with end brackets, openable shutters with 19mm x 6mm thick plain teak wood beading, lipping 1.5mm thick commercial ply vertical support finished in approved 1mm lamination sheet of approved colour, shade and quality on all exposed surfaces. Inner surface painted in two coats of white synthetic enamel paint over 2 coats of patti, one coat of wood primer, including cost of brass fittings, parliamentary hinges, c handles, tower bolts, magnetic catches, aproved brand lock, adhesives, synthetic resins, nails, screws etc., complete including cost of all materials, labour charges, complete as per specification.[Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Providingdecorative teak wood 4 seat dining tables of required size Each and design as per the directions of engineering incharge [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Providing decorative teak wooden chairs for dining tables of required Each size and design as per the directions of engineering incharge [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Providing and fixing wall papers of 3D/2D multicolour/multi design/multi textured self adhesive wall papers of UV printed with eco-friendly dyes vinyle materials, Class A fire rated 0.55mm above thickness etc., water washable Complete as per the Engineer incharge of the work. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Providing and fixing fabric wall paneling with acousting wool backing of required pattern and design as per the direction of engineer in charge. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Providing and fixing of 2'x2' weather proof superior quality Carpet Flooring tile with 4 mm thick including adhesive of approved shade and colour, as per specifications as per the direction of Engineer in charge of the work. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

39.2 - Provinding and fixing Veneer paneling, over the 50mm x 35mm sal wood frame work at spacing not exceeding 600m c/c fixed to the wall and top covered out of 4mm thick approved quality Veneer, fixed over 19mm thick ply strips of 100mm to 200mm with a gap of 6mm to 10mm in between strips of approved brand, termite and water resistant, finished with melamine polish, complete including cost and conveyance of all materials, labour for all items of work HOM complete as per specification. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

7.51 - Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A, as per ASTM E-84, fabric with option of colors - as per the choice of the Architect/Engineer incharge of the size 600x600mm,600x1200mm & 600x1800mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel lmpaler sand construction adhesives as per the instructions laid down by the certified manufacturer.[Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

39.8 - Providing and fixing sigle shutter glass door/ partitions of 12mm thick plain toughened glass of approved make. The door is fixed by using any approved make hardware fitting like patch fitting, pivot, floor machine, locking arrangements and suitable SS door rails with floral glass etching for 1/3 portion of door area etc complete. The rate includes cost of all materials, labour, hire of tools & machineries, as per the specification. etc complete. The rate includes cost of all materials, labour, hire of tools & machineries, as per specifications. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Auditorium chair with concealable writing pad & Common Arm. Tip up and Back push mechanism chair Arm rest to arm rest 558 mm 22inch ABS molded housing for seat & back covers. All sheet metal parts with powder coated. Arm rest in wood or PU. Seat numbering on inner both the side of the chair stands with stickers. Row number for seat along the aisles. Provision for lights on sides along with a is les with the row and the seat numbers display Optional Fabric as per color approved by customer. 100 percent polyester with 4mm lamination. Frames specs 15mm thick high pressure & induction heated plywood for seat manufactured with hardwood veneers. 12mm thick high pressure & induction heated ply wood for Back manufactured with hard wood veneers. Polyurethane foams Thickness Seat cushion tapered type front portion with a hump, Front 115 mm +/- 5mm, Back 90 mm +/- 5mm Back cushion bucket type, Headrest 80 mm +/- 5mm, Centre 65 mm +/- 5mm, Bottom 85 mm +/- 5mm, Sides contours 80 mm +/- 5mm Size ,Seat cushion 432 mm +/-5mmx432mm +/-5mm, Backcushion 685mm + /-5mmx457mm +/-5mm Density of cushions 50to 55kg/m3 Springs-Fortip up and back push mechanism torsion spring/spring steel IS 4454 1981 grade III Sheet metal components - HRCA/CRCA Sheet metal IS 2062 to 2011 & IS 4923 to 1997, Side stand 2mm +/-0.2mm Box structure65mm width to conceal the writing tablet assembly when not in use, Box size 485 mm +/-5mm x 405 mm +/- 5mm both side bottom profiledesigncut,75 mm x 25mm 14g +/-.2mm 200mm length tubular pipe for the leg welded to the 2mm C Channel, Flat for base of the stands 280 mm+/- 2mm length 50 mm +/- 2mm x 5mm +/- 0.2mm.; Mechanism components 2mm HRCA a. Back push box 180mm +/- 2mm x 60 mm +/- 2mm & height of the box 20mm +/- 2mm, ear L bracket attached to the box 190mm +/-2mmx 140mm +/-2mm. With two slot holes for fixing the back b. Tip-up box 180mm +/- 2mm x 60 mm +/- 2mm & height of the box 20mm +/- 2mm, ear L bracket attached to the box 95mm+/-2mmx125mm +/-2mm.With two slot holes to fix the seat. Writing Tablet Aluminum Die castwriting tabletofthe size 320x 220 +/- 2mm and thickness 10mm +/- 1mm, Writing tablet fixed to the Aluminum die cast THinge connected with the stand of the chair by Screwrod. Seat and Back cushion housing ABS molded vacuum forming outof 2mm sheet Installation of chairsThe chairs to be installed to the flooring provided to us ready to fix condition with the Chemical Anchoring.M10x 100mm. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor Make Durian or equivalent.

DR - Providing and supplying decorative VIP chairs for stages using cushions and golden borders height not less than 4 feet, width not less than 3 feet as per directions of engineer incharge of the work [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor].

DR - 85inch 4k Highend Professional Display for AVSI & Digital signage projects 500nit HDMI/DVI/RS232/USB/RJ45/ Wifi Ready/Built-in-speakers/ EDGE LED/Inbuilt Media player & Magic info s6 daisy chain with wall mount or table mount stand and other required accessaries. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make: Sony or equivalent

14.2.1 - Design,supplying,erecting testing and commissioning of-Passenger lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415V 3phase 50cycles AC supply, powder coated / Stainless Steel car entrance doors enclosur es with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7segment display buttons, call register indicator, fire man drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional / international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civilworks like fixing of guiderail, counter weight etc., The total product and services shall adhere to IS14665/2016 (with latest amendments) part/section 1to5 with regards to general guidelines offire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient battery backup and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code(NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. Lift With Machine Room-SS Finish (6 Passenger, 5 stops) [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make:- Otis, Schindler, KONE, Johnson or equivalent

6.8.6 - Supplying of 2 TR 5 Star Invertor type split Air conditioners suitable for operationon A/C supplysingle phase 50 Hz 230 V with hermetically sealed inverter compressorwith air cooled condenser,latest R410A / R-32 refrigerantfan motor, start & run capacitors,relay &over load protector internal unit, with one indoor & one outdoor unit The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube.suitable capacity 3 core sheathed/PVC copper cable and a battery operated wire less remote unit. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make: Daikin, LG or equivalent

6.12 - Installation charges for split type air conditioner with allied works for oneindoorandoneoutdoorunitistobemountedonsuitableAngle Ironsupport upto 3.0 Ton split/cassette type A/C.

2.3.7 - Wiring for lighting / power circuit using one of FRLS PVC insulated 1100 V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010.[Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] 16 mm2

2.3.5 - Wiring for lighting / power circuit using one of FRLS PVC insulated 1100 V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010.[Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] 6 mm2

5.19.14 - Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCB's single phase/3phase/single/double door with powder coated painting Made out of 14 SWG MS enclosure. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make: Legrand, ABB, L&T or equivalent. Double door 12 Way TP&N

5.20.8 - Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) / RCCB 240/450V upto 300mA sensitivity on existing wood/panel board. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make: Legrand, ABB, Schneider, L&T or equivalent. 32-40A 4 pole

5.20.10 - Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) / RCCB 240/450V upto 300mA sensitivity on existing wood/panel board. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make: Legrand, ABB, Schneider, L&T or equivalent. 63A 4 pole

6.13.1 - Supplying and installation of insulated refrigerant copper tubing of5/8"and3/8"with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube. (Split AC) [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

5.18.7 - Suppying and fixing miniature circuit breaker on existing MCB distribution boards using necessary fixing materials and 'C' or 'D' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 Make: Legrand, ABB, Schneider, L&T or equivalent. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] 6-32A TPN

5.18.5 - Suppying and fixing miniature circuit breaker on existing MCB distribution boards using necessary fixing materials and 'C' or 'D' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 Make: Legrand, ABB, Schneider, L&T or equivalent. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] 40A DP

5.18.9 - Suppying and fixing miniature circuit breaker on existing MCB distribution boards using necessary fixing materials and 'C' or 'D' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 Make: Legrand, ABB, Schneider, L&T or equivalent. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

1.8.2 - Supplying and fixing of PVC casing and capping on wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm. etc., as required. 25mm [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

1.8.4 - Supplying and fixing of PVC casing and capping on wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm. etc., as required. 38mm [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

2.1 - Supply and installation of UPVC cable management system of size 32 x 12.5 mm for power supply distribution including position to fix power sockets and consisting of snap-fit lids 2 nos. cable divider and allied accessories such as internal tees, external tees, flat tees etc. It shall have provision to accept mounting boxes that snap fit into the profile complete as required. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make: Legrand, MK or equivalent.

3.6.1 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Make: Anchor, Orpat, Havell's or equivalent. 6A One way Switch [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

3.6.3 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Make: Anchor, Orpat, Havell's or equivalent. 6A Three way Socket [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

3.6.7 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Make: Anchor, Orpat, Havell's or equivalent. 16A One way Switch [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

3.6.10 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Make: Anchor, Orpat, Havell's or equivalent.6/16A Universal socket [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

3.3.6 - Supplying and fixing surface/flush mounting umbreakable PVC modular box suitable for mounting modular switch plates with due grove cutting in Brick.C.C. wall, including necessary rawl plugs, machines/NF screws etc., complete.[Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] 10-12 way

3.5.6 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] 10-12 Module

3.7 - Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230V, 50Hz AC supply and completely wired on existing box. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

9.1.1 - Supply of PVC grade Electrical insulation mat suitable for voltage rating upto 3.3 kV , confirming to IS: 15652:2006 with latest amendment , class A with thickness of 2 mm +/- 10%, ISI marked complete as required. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

1.7 - Extra for groove cutting in brick wall/CC floor to the suitable depth for concealing of conduit/GI pipe and plastering, finishing upto wall surface complete. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Upto 50mm conduit

1.5.2 - Supplying and fixing PVC / metal conduit deep junction box. Make: GB, Bharath, Tata or equivalent.25mm deep juction box

1.5.3 - Supplying and fixing PVC / metal conduit deep junction box. Make: GB, Bharath, Tata or equivalent.32mm deep juction box

11.6.2 - Supplying of recess mounting non integral type 1feet x 1feet 24W LED luminaire comprising of pressure decast / extruded aluminium housing, with spring loaded false ceiling clamps, Power LED swith CCT 6500 degree K, CRI greater than 70percent. efficacy greater than 100 lumen per W, 120 degree beam spread, life greater than 25000 burning hours and Compliance to IS10322 / IEC60598, LM79 & LM80. The lamp compart mentis enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5percent of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20percent, Life as per LM79. The operating input voltage should be between 130 to 275V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

11.6.2 - Supplying & fixing flexible LED Strip Light.W Power consumption in 5ms length CCT 6500 degree K, CRI greater than70 percent. efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322 / IEC60598, LM79 & LM80. The LED are driven by HF electronic driver non integrated, with PF greater than 0.95, power loss should less than 5 percent of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20percent, Life as per LM79. The operating input voltage should be between 130 to 275V. BIS Approved with 2 years Warranty against any manufacturing defect working under standard electrical condition. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Supply, installation, testing and commissioning of Electronic lectern - Metallic frame,processor based, 22 inch touch screen LED display with 1920 x 1080 resolution, battery free stylus pen, windows 10 operating system, 4 GB RAM, 1024GB HDD, keyboard, mouse,motorized tilt mechanism, paper scan system, 30Min backup UPS supplied, floor mounted with wheels, with required drawers and cabinets, VGA, HDMI, Audio, SD, LAN USB ports, wifi compatible, inbuilt speakers, gooseneck & handheld mic of Senneiser make, wireless reciever, amplifier and other required cables, connectors, softwares, accessaries complete as required for the proper woring of the system. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Providing & Supplying WUXGA 3LCD Laser Projector with 9000ANSI Lumens, 4K Enhancement and Standard lens [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make Epson-EB-L1495U

DR - Ceiling mount kit for the above Projector: [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Giant Motorized Screen with AMX/RS232/RS485 - RF remote & Fiber Glass Matte White Fabric. 24' Diagonal, 13'x20' (LxB) 16:10 Aspect Ratio [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Liberty : Screen Pro 280"(16:10) .

DR - Left,Right and Stage front filler Speaker 12inch (12inch LF + 1.7inch HF) High Performance Passive Wall Loudspeaker with RMS power 400 Watts or better, Maximum Power Handling 1600 Watt or better, frequency response (plus or minus 3dB) 58Hz to 20 kHz or better, Sensitivity (1W/1m) 99 dB or better, Max SPL of 125 dB or better, Dispersion 90 degree X 70 Degree or better, Speakon Connectivity, Construction : High Quality Plywood or better, CE Certification or more [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Mounting Bracket for VEXO112 Black version Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Amplifier for the Speaker and stage front filler Quad Channel Class D Power amplifier with built in DSP, 4 x 1250W at 4 ohms or 4 x 630 W at 8 Ohms or better or 2 x 2500 W at 8 ohms bridge or better, Frequency Response (plus or minus 3 dB) 20 Hz 20 kHz, THD plus N (at 1 KHz) less than 0.05percent or better, Signal or Noise greater than 95 dB or better, Input Sensitivity 19.5 dB to 27 dB or better, Cooling Temperature Controlled Fan, Input Connecivity XLR and 3 Pin Euro or better and Output Connectivity Speakon and or 2 pin Euro Terminal or better, CMRR 70 dB or better, Damping Factor less than 200 or better, RS232 control or RJ45 control, Dante or AES67  expansion port, Protection DC Short Circuit, Over Heating, Over Load, Signal Limiting, Power Limiter, Access Protection through Password and USB Key Protection etc. LCD Display with intuitive user interface, CE Certification or more. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Stage Monitor10 inch (10 inch LF + 1.7inch HF) High Performance Passive Wall Loudspeaker with RMS power 300 Watts or better, Maximum Power Handling 1200 Watt or better, frequency response (plus or minus 3dB) 65Hz 20 kHz or better, Sensitivity (1W or 1m) 96 dB or better, Max SPL of 121 dB or better, Dispersion 90 degree X 70 Degree or better, Speakon Connectivity, Construction High Quality Plywood or better, CE Certification or more [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - 16 Channel Analog Mixing Console: Max. 10 Mic / 16 Line Inputs (8 mono + 4 stereo) / 4 GROUP Buses + 1 Stereo Bus / 4 AUX (incl. FX) [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Dual Channel Wireless Hand Held Mic [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Dual Channel Wireless Lapel Mic [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Gooseneck Mic with Base [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Dynamic Wired Microphone [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Long Mic Stand [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Short Mic Stand [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Digital Signal Processor with 16 Slot with Cards & DANTE 64x64 ( Input Card XC-SML x 3no + Output Card XC-SLO x 4no + USB Card XC-SUB x 1no + HEARCLEAR AEC x 1no ) 6 x 8 DSP with USB and AEC[Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Junction Floor Box near the Stage 12 XLR [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Cables & Connectors [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Installation and Commissioning charges

DR - Stain Steel 304 grade Industrial kitchen chimney, aluminium exhaust pipe with push button control type wall mounted , Chimney air ssuction capacity 2200 Cum per hr, Exhaust motor 1400RPM, length 1.5m, width 1 m with baffle filter requirements as per the directions of engineer incharge [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Supply & fixing of IKEA 71 L Convection Microwave Oven, Width:59.5 cm, Depth:56.9 cm, Heigth :59.5 cm, cord length 90 cm requirements as per the directions of Engineer incharge[Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make: IKEA, LG, Samsung or equivalent

DR - Supply and Installation of 674 L 5 Star Frost Free Double Door Refrigerator with following specification: puff insulated, built-in stabilizer, power save compressor, copper coil, mettalic finish. Color shall be approved by the Engineer In-charge. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make:LG, Whirlpool, Samsung or equivalent

DR - Four Burner Continental cooking Gas stove, stain less steel [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

DR - Blue star Water Treatment System 80 LPH Blue star ( SWCSDLX6080UVROE) with Sediment Filter, Absorption Filter, RO Membrane Element, Booster Pump, Reject Water Control Mechanism, Power Supply, Auto Shut-off Mechanism, Flushing Mechanism,Activated Carbon Media, Corrosion-Resistant, storage tank to be of 80 ltr capacity and of ABS food grage material, operate at 230V.[Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] Make: Blue star

081 - CUBICLE WORKSTATIONS Providing and fixing CUBICLE WORKSTATIONS consisting of wings made out of 75 mm thick MS CRCA powder coated,tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm W) and one soft board (600 mm W) per workstation, Bottom tile finish 9 mm thick Laminate tile of approved colour,Raceway-one middle race way(600mm W) below table topper work station and continous race way at the skirting level,Wiremanager-ABS plastic gromme tone number per table,Table top - 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straight edge bound Hardware-MS powder coated corner bkt, cantilever bkt,separator hook on bkt,L bkt and Table joint plate.,asper specifications, drawings and as directed by Engineer incharge. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor] X TYPE 4 wings 3 B)Size : 1500 mmW x 1500mm D x 1200 mm ht.

9.13 - Supplying,erecting, testingand commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load,withoverloadprotection,spikesuppression,operatingat00C to400C.Rangeetc., complete. [Materials of approved standard make, quality, colour shall be procured, client selection is final and binding on the contractor]

083 - Providing Services for furnishing of construction drawings etc., for all interior works of the building including providing 3D drawings and or drawings to be developed using appropriate software's for approval of the competent authority

0084 - Project monitoring charges ( PMC charges) for inspection of quality of works or the materials or the furniture's or the items to be supplied by the contractor with reference to the standard specifications and recommendations