Karnataka Slum Development Board Tender

Providing and laying in position plain cement concreteof Mix 1:4:8 with OPC @ 180kgs, with 40mm and down size gradedgranite metal coarse aggregates @0.85cum and fine aggregates @0.57cum machine mixed, machine mixed, concrete laid in layers notexceeding 15 cms. thick, well compacted, in foundation, including costof all materials, labour, HOM curing complete as per specifications and the directions of the Engineer-in-charge of the work.

Providing and laying in position plain cement concrete of Mix M20 with OPC @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @0.43cum machine mixed,concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, Plinth and cills including cost of all materials, labour, HOM curing complete as per specifications and the directions of the Engineer-in-charge of the work.

Providing and laying in position reinforced cementconcrete of Design Mix M20 with OPC @ 320kgs, with 20mm anddown size graded granite metal coarse aggregates @0.69cum and fineaggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirmingto IS 9103-1999 reafirmed-2008, machine mixed, concrete laid inlayers not exceeding 15 cms thick, vibrated for all works in foundationfor footings, pedastals, retaining walls, return walls, walls (anythickness) including attached pilasters, columnspillars, posts,struts, buttresses, bed blocks, anchor blocks & plinths etc., includingcost of all materials, labour, HOM curing, complete but excluding cost of reinforcement as per specifications and the directions of the Engineer-in-charge of the work.

Providing and removing centering, shuttering, strutting,propping etc., and removal of form work for vertical surface suchas walls at any thickness, including attached pilasters, buttresses,plinth cills and string courses cost of all materials, labour complete as per specifications and the directions of the Engineer-in-charge of the work.

Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position,lapping and / or welding wherever required, tying with binding wire andanchoring to the adjoining members wherever necessary complete as perdesign (laps, hooks and wastage shall not be measured and paid) costof materials, labour, HOM - do - TMT bars Fe 500 complete as per specifications and the directions of the Engineer-in-charge of the work.

Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost ofgenerator, HOM of machinery, Screed Vibratory, Power Floater, bladeand disc etc., with all lead and lift. complete as per specifications and the directions of the Engineer-in-charge of the work.

Providing groove cutting for width of 5mm to 10mm and depth 80mm-100mm including cost of cutting machine, generator & HOM, including cost of blade,coolant etc., including cleaning of groove & providing sand and hot bitumen fillars, and filler metal etc., including cost of conveyance of all materials, labour, lead and lift charges and all other incidental charges as per drawing and complete as per specifications and the directions of the Engineer-in-charge of the work.

Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications and the directions of the Engineer-in-charge of the work.

Refilling available earth around pipe lines, cables in layersnot exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5 m. includingcost of all labour complete as per specifications and the directions of the Engineer-in-charge of the work.

Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications and the directions of the Engineer-in-charge of the work.

Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling, finishing with all necessary tools ,plants and materials etc., complete as per specifications and the directions of the Engineer-in-charge of the work.

Removal of all types of Hume pipes and stacking including earthwork and dismantling of masonary works C Above 900mm Dia complete as per specifications and the directions of the Engineer-in-charge of the work.

Providing and fixing to wall ,celling and floor galvanised/mild steel tube nominal bore with fitting (medium grade weight 1.27 kg/mtr )B class including cost of all material ,labour charges ,HOM and testing completed as per specification -do-15mm dia. complete as per specifications and the directions of the Engineer-in-charge of the work.

Providing and fixing in position brass stop cock of approved quality nominal bore including cost of all materials ,labour and HOM with all leads,-do- 15mm dia nominal. complete as per specifications and the directions of the Engineer-in-charge of the work.

Supply of LED Street light with pressure die cast aluminium housing body with optimal heat sink for better thermal dissiption. Diffuser with injection moulded and is made of polycarbonate material with high transmission index ,delivering superior light output . Rated life Buring Hrs 50000hr @LuminarMaintance of 70% CCT>5500K,IP 66 optical and electrical compatment and impact resistance of complete luminare .1K08.Powe factor .0.9 with mains current should not grater than0.1A to 0.7A and surge protection-Min 4KValong with over voltage /overload ,short circute /miswiring protection .compactible for pole mounting with outer dia40mm to50mm.universal Voltage driver to oprate wide voltage range from 100V to 270V 60/60Hz application.over load and short circuit protection ensure relaiable operationin spite of problem in output, complience IS 10322/IEC 60589 LM 79&LM80 aderence with ORHS.UL approved mcpcb.Top acess street light with singal screw to ensure ease of maintainence at sight Site location with minimised minimal tool .LED light fixures with .....Wsystem power comsumption .LED efficiency .>130LM/W @1W and fixture efficency>80LM/W with nominal CRI>75.Luminary manufaturere should have inhouse facility accredited by NABL-CPRI and any Governament certified agency and Design and Devlopment facility certifed by ISO 9001:2008 .Housing with supplier word mark/ name shall be Engraved/Embossing on the die cast housing /Body part.Warrentyt of 5year against any manufacturing defect working under standard electrical condition as menstioned above should be given by LED source manufacture. Suitable for B1/B2 Roads as per 1944 part 1&part2. complete as per specifications and the directions of the Engineer-in-charge of the work.