Karnataka Slum Development Board Tender

code04 - Haulage of materials by tipper excluding cost of loading, unloading and stacking complete as per specifications. MORTH -100/ Chapter 1 Case-II : Unsurfaced Gravelled Road. debris removal for 25km., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code05 - Earth work excavation for pipeline trenches in all kinds of soils by Manual means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code06 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.6 kg/m 110mm Dia., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code07 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.6 kg/m 90mm Dia., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code08 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.6 kg/m 160mm Dia., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code09 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour ., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code10 - Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code11 - Constructing brick masonry chamber of internal dimension 600x600 mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code12 - Supplying and fixing SFRC frame and cover conforming to IS 12592 (part- I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete. Medium Duty., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code13 - Providing and constructing “WIRE CUT BRICK MANHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Supplying and fixing SFRC Manhole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Supplying and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, dewatering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia Circ. B M.H: Constructing Brick Masonry Circular Manhole 1.2 m internal dia. , 1.2 M depth & SFRC cover & frame., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code14 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) for Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code15 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code16 - Terrace Plastering & outside painting works: Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code17 - Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code18 - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2L/per m2,having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 L/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code19 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 Sq.mm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sq.mm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of aterials, labour., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code20 - Other developoment works: Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code21 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery et., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code22 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code23 - Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 25mm nominal OD pipes - 32mm pipe to Houses., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code24 - Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 32mm nominal OD pipes., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code25 - Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC Bend., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code26 - Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC Tee., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code27 - Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 25 mm dia PVC Bend., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code28 - Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 25 mm dia PVC Tee., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code29 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code30 - Providing and fixing gun metal non- return valve of approved quality (screwed end) :Horizontal :32 mm nominal bore., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code31 - Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments.1.00 HP/0.75KW 18 STG., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code32 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25mm Nominal Bore., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code33 - Fixing a shunt capacitor of upto 5 kVAR capacity with necessary clA, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code34 - Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box.., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code35 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32A., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code36 - Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.II - Double Door 8 Way SP &N., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.

code37 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site..

code38 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour., Complete as per specification, all lead, lifts, curing and the directions of Engineer in-charge of the site.