Karnataka Slum Development Board Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 1,42,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
KSDB/2021-22/OW/WORK_INDENT3134Bid Award Id
ViewTender No
KSDB/2021-22/OW/WORK_INDENT3134Tender Authority
Karnataka Slum Development Board ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints,over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits, with chloropyriphos emulsifiable concentrates of 20% concentration at 3.19 Litre/sqm., including cost of chemical, diluting in water to one percent concentration, labour, HOM complete as per specifications. (Plinth area of the building at ground floor only shall be measured., complete as per specification and as per directions of the Engineer-In-Charge.
63.8
-
7303.82
... More
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift., complete as per specification and as per directions of the Engineer-In-Charge.
24.07
-
63143.31
... More
Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery., complete as per specification and as per directions of the Engineer-In-Charge.
102.54
-
565011.81
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour., complete as per specification and as per directions of the Engineer-In-Charge.
120.98
-
33709.87
... More
Providing and laying in position reinforced cement concrete of Design Mix M20 with OPC @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters onfirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement., complete as per specification and as per directions of the Engineer-In-Charge.
29.16
-
178217.76
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all materials, labour -Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
64.64
-
31833.91
... More
- do -First Floor
59.15
-
29513.48
... More
- do -Second Floor
13.65
-
6899.26
... More
Providing and laying in position reinforced cement concrete of Design Mix M20 with OPC @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM curing - Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
4.48
-
27380.51
... More
- do -First Floor
3.66
-
22606.06
... More
- do -Second Floor Head Room Col's
0.95
-
5929.25
... More
Providing and constructing granite / trap / basalt size stone masonry in foundation with cement mortar, stone hammered dressed in courses not less than 20 cms high, bond stones at 2m. apart in each course including cost of materials, labour, curing complete as per specifications.Size Stone Masonry., complete as per specification and per direction of the Engineer-In-Charge.
40.31
-
195645.39
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour., complete as per specification and as per directions of the Engineer-In-Charge.
58.21
-
18357.11
... More
Providing and laying in position reinforced cement concrete of design Mix M20 with OPC @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels, and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns,pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement., complete as per specification and as per directions of the Engineer-In-Charge.
6.91
-
42231.99
... More
Filling available excavated earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20cms in depth, compacting each deposited layers by ramming after watering with lead upto 50 m and lift upto 1.5m including cost of all labour., complete as per specification and as per directions of the Engineer-In-Charge.
121.38
-
26349.17
... More
Providing and constructing load bearing wall with solid concrete blocks of size 400x150x200mm having block density not less than 1800kg/m3 having a minimum average compressive strength of 5.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc-Ground floor., complete as per specification and as per directions of the Engineer-In-Charge.
170.53
-
175516.3
... More
- do - First floor
109.03
-
116339.37
... More
Providing and constructing non load bearing wall with solid concrete blocks of size 400x100x200mm having a block density not less than 1800kg/m3 having a minimum average compressive strength of 4.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of all materials, labour charges, scaffolding, curing, hire charges of machineries etc., Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
53.86
-
47174.9
... More
- do -First Floor
53.86
-
49210.8
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specifications. LINTEL Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
23.3
-
7347.89
... More
- do -First Floor
23.3
-
7347.89
... More
Providing and laying in position reinforced cement concrete of design Mix M20 with OPC @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels, and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns,pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement-Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
1.7
-
10389.92
... More
- do -First Floor
1.7
-
10500.08
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour - Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
48.6
-
15326.5
... More
- do -First floor
48.6
-
15326.5
... More
- do -Second floor
3.75
-
1182.6
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specifications for heights more than 3.50m from ground level - Ground floor., complete as per specification and as per directions of the Engineer-In-Charge.
99.53
-
42996.96
... More
- do -First floor
99.53
-
42996.96
... More
- do -Second floor
10.96
-
4734.72
... More
Providing and laying in position reinforced cement concrete of design Mix M20 with OPC @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels, and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns,pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement - Ground floor., complete as per specification and as per directions of the Engineer-In-Charge.
4.86
-
29702.96
... More
- do -First floor
4.86
-
30017.89
... More
- do -Second floor
0.75
-
4680.99
... More
Providing and laying in position reinforced cement concrete of design Mix M20 with OPC @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels, and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns,pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement - GROUND FLOOR., complete as per specification and as per directions of the Engineer-In-Charge.
17.65
-
107871.86
... More
- do -First floor
14.97
-
92462.5
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:4, to ceiling including rounding off corners wherever required smooth rendering, including providing and removing scaffolding, cost of materials, labour, curing etc - Ground floor., complete as per specification and as per directions of the Engineer-In-Charge.
113.47
-
24999.71
... More
- do -First floor
87.66
-
19881.29
... More
Providing 15mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required smooth rendering. Providing and removing scaffolding, including cost of materials, labour, curing etc - Ground floor., complete as per specification and as per directions of the Engineer-In-Charge.
163.44
-
36715.16
... More
- do -First floor
163.44
-
37774.25
... More
Providing lime rendering for plastering to wall and ceiling, including cost of materials, labour, curing - Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
276.91
-
9570.01
... More
- do -First Floor
251.1
-
10305.14
... More
Providing 18mm thick cement plaster in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing - Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
276.26
-
77872.17
... More
- do -First Floor
216.96
-
63968.49
... More
Providing wood frames of Red Sal wood frames doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM -Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
0.3
-
19638.94
... More
- do -First Floor
0.24
-
15711.15
... More
Providing and fixing in position fully panelled wood shutters for doors, with styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM (excluding cost of fixtures)Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
5.51
-
21726.37
... More
- do -First Floor
4.18
-
16500.13
... More
Providing and fixing in position aluminium window and ventilators as per approved drawings with sliding shutters using double track window frame section of size 61.85x31.75mm. with s 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, .25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, raul plugs, or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium sections pretreated for removal of any Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
13.64
-
63889.21
... More
- do -First Floor
13.64
-
63977.6
... More
SOLID PVC DOOR FRAME Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification - Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
6.3
-
3184.27
... More
- do -First Floor
6.3
-
3211.49
... More
SOLID PANEL PVC DOOR SHUTTER Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for styles and 15x15mm for top & bottom rails, covered with heat moulded PVC channel of 5mm thick sheet & 30 x 50mm wide to form styles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the styles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 m.m Aluminium hinges. Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
6.3
-
19037.59
... More
- do -First Floor
6.3
-
19064.81
... More
Providing skirting, dadoing, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, Ground Floor., complete as per specification and as per directions of the Engineer-In-Charge.
35.52
-
48757.59
... More
- do -First Floor
35.52
-
48834.32
... More
Providing and fixing Vitrified glazed tiles of approved make, quality & colour of size 600 x 600 x 10mm thick fixed on bed of 12mm thick cement mortar for flooring, skirting and jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains, including cost of all mateirals, mortar, labour, etc., complete as per specification and as per directions of the Engineer-In-Charge.
69.32
-
71646.38
... More
- do -First floor
69.32
-
71796.11
... More
Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour., complete as per specification and as per directions of the Engineer-In-Charge.
276.91
-
32896.91
... More
- do -First floor
251.1
-
31457.81
... More
Providing and fixing M.S.grill work for windows and ventilators using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM., complete as per specification and as per directions of the Engineer-In-Charge.
286.34
-
29378.48
... More
- do -First floor
286.34
-
31233.97
... More
Providing and fixing M.S. Hand railing for Balcony/Staircase with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm M.S. square rod placed vertically, spaced at 100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced at equal interval. These assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. All the joints and sections hould be cut to length, welded and grinded wherever necessary etc., complete . The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and as per directions of the Engineer-In-Charge.
5.4
-
16562.88
... More
- do -First Floor
10.8
-
33195.74
... More
Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour., complete as per specification and as per directions of the Engineer-In-Charge.
10.35
-
1061.91
... More
- do -First Floor
10.8
-
1154.74
... More
Providing and laying flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete, using broken granite metal of 12.5mm nominal size and top layer of 10mm thick plaster with cement mortar 1:3, finished with floating coat of neat cement , including cost of materials, labour, curing., complete as per specification and as per directions of the Engineer-In-Charge.
24.44
-
16048.28
... More
Providing waterproof treatment to roof slab using 2 coats of acrylic copolymer elastomeric ISOPROOF sealer & protector. The surface shall be prepared free of tar, dust, fungus, loose particles etc.,The surface shall be applied with basecoat of crystallization liquid and then ISOPROOF, wetting agent and liquid (1:1:6) over the prepared surface. In addition the surface shall be provided with polysulphide/acrylic sealant to V groves, making haunch at junction of parapet and roof slab and at damaged portion using patching mortar to drain off rain water. Over this one coat of flexible cementatious membrane (FCM), Spreading 2 layers of 40 gsm non woven geotextile membrane as reinforcing material (over FCM) with one primer coat of ISOPROOF & applying second coat of ISOPROOF liquid over the primer coat - conforming to ASTM D 412 - 1992. The work shall be carried out., complete as per specification and as per directions of the Engineer-In-Charge.
81.05
-
85783.32
... More
Extra for providing and mixing water proofing compound in cement plaster work at 1 kg per bag or in the proportion recommended by the manufactures for cement mortar 1:3, 18mm thick cost of materials., complete as per specification and as per directions of the Engineer-In-Charge.
101.25
-
1312.2
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM - TMT bars Fe 550., complete as per specification and as per directions of the Engineer-In-Charge.
4.5
-
347577.48
... More
Providing and fixing M.S. Gate as per Chief Architect Drawing, using 50mm x 50mm 14 guage M.S. hollow pipe frame work bent to ornamental shape as shown in the drawing and 35mm x 6mm and 16 x 16mm Square rods for verticals alternatively spaced at 4cms c/c in two halves and 40mmx6mm M.S. flats for horizontal member and at the top cast iron spikes are provided at alternate vertical members as shown in the drawing etc., complete. All the steel surface should be thoroughly cleaned free of rust and painted with anti corrosive paint (shop paint) etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, with lead and lift, loading and unloading charges, etc., complete as per specification and as per directions of the Engineer-In-Charge.
4.95
-
16102.15
... More
Internal Water Supply: Providing and fixing in position brass bib cock of proved quality nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications.20 mm dia nominal bore., complete as per specification and as per directions of the Engineer-In-Charge.
4
-
747.36
... More
Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) nominal bore including B41ost of all materials, labour and HOM with all leads - 32 mm dia nominal bore., complete as per specification and as per directions of the Engineer-In-Charge.
2
-
1792.8
... More
Providing and fixing unplasticised PVC connection pipe with brass union 15mm nominal bore of PVC connection including cost of all materials, labour and HOM with all leads - do - 450 mm Length., complete as per specification and as per directions of the Engineer-In-Charge.
4
-
1140.48
... More
Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) 20mm nominal OD Pipes., complete as per specification and as per directions of the Engineer-In-Charge.
5
-
847.8
... More
- do -25mm nominal OD Pipes
5
-
1058.4
... More
- do -32mm nominal OD Pipes
10
-
2743.2
... More
Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and making good walls) 20mm nominal OD Pipes., complete as per specification and as per directions of the Engineer-In-Charge.
75
-
19035
... More
- do -25mm nominal OD Pipes
15
-
4746.6
... More
Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). (25mm nominal OD Pipes., complete as per specification and as per directions of the Engineer-In-Charge.
20
-
3866.4
... More
- do -32mm nominal OD Pipes
10
-
2440.8
... More
Providing and fixing water meter with stop cock, jam nut, socket in G.I pipe line including cutting and threading the pipe and making long screws including cost of all materials, labour, HOM and testing., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
1425.6
... More
Supply and fixing of GM horozontal plunger type heavy duty ball valve with copper float of approved brand of manufacture and fixed to the inlet pipe at underground sump. The valves shall be as per the IS:1703:1977 (Consultant Specification) ., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
2484
... More
Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM and testing (For 1000 litre capacity)., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
7374.24
... More
INTERNAL DRAIN: Supply,fixing and testing PVC soil, waste and vent pipes,(SWR) confirming to IS 13592:1990, type B with elastomeric rubber ring (confirming to IS:5382) inclusive of all necessary specials like bends, tees, offsets, door bends, junctions , cowls, vent cowl and all other items to complete the installation.The pipes shall be fixed on walls, under floor, under ceiling and in the pipe duct. The installation shall be as per the drawings and specifications. The scope of installation includes wall casing, making necessary holes in walls, beams, retaining walls with machines, excavation under floor and making good the chased surfaces etc., Complete as per specifications.(Consultant specification) 75mm OD SWR PVC., complete as per specification and as per directions of the Engineer-In-Charge.
150
-
68040
... More
- do -110mm OD SWR PVC
120
-
60912
... More
Supply,fixing and testing PVC of rigid PVC Pressure pipes (6kg/sqcm) (confirming to IS:4985) selfit type. The pipe shall be laid from wash basin to flooir trap, kitchen sink to floor trap, anti-siphonage and cross vent connections. The scope of supply includes all fittings, specials, strong solvent cement and all other items required to complete the installation wall chasing, making holes in slab, walls, beams and making good the Chased surfaces etc.,Complete as per specifications.(Consultant specification). 40mm OD., complete as per specification and as per directions of the Engineer-In-Charge.
60
-
10692
... More
- do -50mm OD
60
-
12960
... More
- do -63mm OD
20
-
4968
... More
Supply,fixing and testing PVC soil, water take down pipes,(SWR) confirming to IS 13592:1990, type A rubber ring (confirming to IS:5382) inclusive of all necessary specials like bends, tees, offsets, door bends, junctions , cowls, vent cowl and all other items to complete the installation.The pipes shall be fixed on walls, under floor, under ceiling and in the pipe duct. The installation shall be as per the drawings and specifications. The scope of installation includes wall casing, making necessary holes in walls, beams, retaining walls with machines, excavation under floor and making good the chased surfaces etc., Complete as per specifications.(Consultant specification). 110mm OD., complete as per specification and as per directions of the Engineer-In-Charge.
120
-
56376
... More
Internal Sanitary: Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, S-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre white glazed / vitreous china clay low level, flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with specials and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour., complete as per specification and as per directions of the Engineer-In-Charge.
8
-
41532.48
... More
Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour., complete as per specification and as per directions of the Engineer-In-Charge.
4
-
16757.28
... More
Providing 3 cms dia GI telescopic flush tank lever of approved 1st quality and make conforming to ISI specifications and fixing in position as directed by the Engineer. Rate includes cost of materials and conveyance to work spot., complete as per specification and as per directions of the Engineer-In-Charge.
8
-
1814.4
... More
Providing wash basin brackets of approved 1st quality and make conforming to ISI Specifications and fixing for low down cistern as directed .Rate includes cost of materials and conveyance to work spot., complete as per specification and as per directions of the Engineer-In-Charge.
8
-
2073.6
... More
Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead).-do- 15cms x 10cms., complete as per specification and as per directions of the Engineer-In-Charge.
4
-
1209.6
... More
Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). 12.5cms x 7.5cms., complete as per specification and as per directions of the Engineer-In-Charge.
4
-
1231.2
... More
EXTERNAL SANITARY AN D WATER SUPPLY WORKS: Providing and laying in position to required level or slope of internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of cement mortar in proportion of 1:1, testing of pipes and joints,including cost of materials, labour charges - 100mm., complete as per specification and as per directions of the Engineer-In-Charge.
10
-
2646
... More
Providing and laying in position to required level or slope of internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of cement mortar in proportion of 1:1, testing of pipes and joints,including cost of materials, labour charges-150mm., complete as per specification and as per directions of the Engineer-In-Charge.
20
-
7948.8
... More
Providing and laying in position plain cement concrete M7.5 using 40mm and down size graded granite metal, machine mixed concrete laid in layers not exceeding 15 cms thick, well compacted, for internal diameter stoneware pipes including cost of materials, labour charges, HOM curing- 100mm., complete as per specification and as per directions of the Engineer-In-Charge.
30
-
7840.8
... More
Constructing brick masonry inspection chamber for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C.top slab with cement concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. – do – 600x600mm and 450mm depth (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 600x600mm
2
-
18338.4
... More
– do – 450x450mm and 450mm depth (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 450x450mm., complete as per specification and as per directions of the Engineer-In-Charge.
4
-
22896
... More
Extra for item no. KSRB 12-8.1 depth beyond 450mm and brick masonry chamber with table moulded non modular bricks of class designation 50 in cement mortar 1:5 for every 150mm depth or part thereof including cost of materials, labour charges, curing., complete as per specification and as per directions of the Engineer-In-Charge.
2
-
1574.64
... More
Point Wiring using Copper wire without Switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100 V gradeCOPPER FRLS PVC insulated, 2x1.5SqmmCable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch., complete as per specification and as per directions of the Engineer-In-Charge.
18
-
3600
... More
-do -b)Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch
41
-
11275
... More
-do -c)Long point above 6Mtr up to 10Mtr from tapping point to out let via switch
32
-
12800
... More
-do -d)Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches
7
-
3675
... More
-do -e)Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches
1
-
750
... More
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way., complete as per specification and as per directions of the Engineer-In-Charge.
28
-
2660
... More
- do -4-5Way
3
-
315
... More
- do -6Way
4
-
500
... More
- do -8Way
8
-
1160
... More
- do -10-12 Way
8
-
1320
... More
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module., complete as per specification and as per directions of the Engineer-In-Charge.
28
-
3080
... More
- do -4 Moudule
3
-
375
... More
- do -6 Moudule
4
-
700
... More
- do -8 Moudule
8
-
1600
... More
- do -10 Moudule
2
-
460
... More
- do -12 Moudule
12
-
3240
... More
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way., complete as per specification and as per directions of the Engineer-In-Charge.
10
-
700
... More
- do -6Amps Two way
4
-
380
... More
- do -6Amps 3way socket
10
-
1050
... More
- do -Stepped Fan Regulator
10
-
2900
... More
- do -16Amps one way switch
4
-
460
... More
- do -6Amps Bell push
2
-
192
... More
- do -6/16Amps universal socket
4
-
648
... More
- do -TV/Telephone socket
2
-
158
... More
- do -Supplying and fixing metal fan box with round hook
8
-
680
... More
Supplying 19mm dia 2/ 2.5mm thick heavy guage PVC conduit pipe with suitable size bends metal/PVC junction boxes, adhesive paste etc. and running before concreteing the Slab. The conduit should be tied to the reinforcement rods by using binding wires and unsed ways of junction boxes and pipe ends should be covered using PVC end enclosures run with SWG GI fish wire where ever necessary. a)25mm dia 2mm thick., complete as per specification and as per directions of the Engineer-In-Charge.
250
-
50000
... More
- do -b)32mm dia 2mm thick
25
-
6875
... More
Groove Cutting: Supplying 19mm dia 2/ 2.5mm thick heavy guage PVC conduit pipe with suitable size bends metal/PVC junction boxes, adhesive paste etc. and running before concreteing the Slab. The conduit should be tied to the reinforcement rods by using binding wires and unsed ways of junction boxes and pipe ends should be covered using PVC end enclosures run with SWG GI fish wire where ever necessary. a)25mm dia 2mm thick., complete as per specification and as per directions of the Engineer-In-Charge.
200
-
10600
... More
- do -b)32mm dia 2mm thick
18
-
1224
... More
Wiring for lighting / power circuit using one of PVC insulated 110 V grade, mutis and copper conductor single core cable in open or concealed system of wiring. a) 1.5sqmm., complete as per specification and as per directions of the Engineer-In-Charge.
250
-
3750
... More
- do -b) 2.5sqmm
400
-
10000
... More
- do -c) 4.0sqmm
120
-
3840
... More
- do -d) 6.0sqmm
100
-
5200
... More
Supplying and fixing regular MCB distribution boards on wall/woods board/flush mounting using required clamps, bolts, nuts.,etc with provision for fixing suitable type capacity MCB's single phase/single door with powder coated painting etc., complete. 4way TP&N., complete as per specification and as per directions of the Engineer-In-Charge.
3
-
7605
... More
Supplying, fixing and wiring current operated earth/residual current circuit breaker 240/450V with 6kA short circuit with standing capacity upto 100-300mA sensitivity on exsiting wood/panel board. 40 Amps 4 pole., complete as per specification and as per directions of the Engineer-In-Charge.
2
-
4930
... More
- do -63 Amps 4 pole
1
-
2865
... More
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve indicator ON/Off, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required. a)5-32A SP MCB., complete as per specification and as per directions of the Engineer-In-Charge.
12
-
2340
... More
- do -b)32A TPN MCB
3
-
3015
... More
- do -EMB PANEL
1
-
32740
... More
Supplying box type fluorescent tube light fitting of 4 36/40 watts fluorescent tube fitting, made out of M.S sheet and stove enameled with low loss open construction copper wound ferro magnetic ballast ,starter,locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230 volts A C supply including 1No 4'-36/40Watts fluorescent tube. 1x4'.36/40Watts., complete as per specification and as per directions of the Engineer-In-Charge.
20
-
13500
... More
Supplying of 6A CG or pendent holders ,bakelite/PBBC Brass with 11 watt CFL lamp., complete as per specification and as per directions of the Engineer-In-Charge.
8
-
1344
... More
Supplying of 1440rpm heavy duty exhust fan with bracket blades suitable for operate on 230V 50Hz ,AC Suppky complete.15"Sweep(450mm)., complete as per specification and as per directions of the Engineer-In-Charge.
4
-
13200
... More
Supplying capacitor type ceiling fan complete with down rod blades,shackle,canopies etc , for operation on 230 volts ,50 cycles .Single phase AC supply conforming to ISS-374-1979 and with double ,ball bearing system and as per technical data approved. 48"Sweep(1200mm)
8
-
14400
... More
Fixing all types and allcapacities flurescent / false ceiling/rafters/CFL fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted RVC insulated wires, required nos of round blocks and clamps(if required)., complete as per specification and as per directions of the Engineer-In-Charge.
20
-
2100
... More
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing S hook together with supplying and fixing a 5 ampers ceiling rose,necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring completely., complete as per specification and as per directions of the Engineer-In-Charge.
8
-
840
... More
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortor and colouring to match the existing wall or rackets with bolts and nutsand a 5 amps,ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame if required., complete as per specification and as per directions of the Engineer-In-Charge.
4
-
3080
... More
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable of approved make.2 Pair., complete as per specification and as per directions of the Engineer-In-Charge.
75
-
1050
... More
Supplying fixing and wiring earth electrode for grounding of lifts ,transformers,DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover.The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm allround with alterate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.
2
-
6000
... More
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm., complete as per specification and as per directions of the Engineer-In-Charge.
30
-
2250
... More
BOREWELL: Geophysical investigation of site for sinking Borewell for supplying drinking water to the habitation either through the Hand pump, MWS of P.W.S.S by vertical electrical sounding by adopting Venner or Schlumberger's method, including reconnaissance survey of geological formation, Gerophysical investigation of existing Ground Wate in the vicinity, its qualityf 1.0 meter in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instrument and accessories to work site., engaging techinical personal and labour required etc., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
3881
... More
Sinking borewell of 165 mm dia clear using super fast hydraulic rig of capacity 250 PSIG & above CFM & above in all strats including over burden upto 20 mts fixing of casing pipes, collars and cap with necessary cutting, throading and welding including transportation of rig and supporing vehicles, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding coat of casing pipes, collars, cap etc.,) 9.1.1 Uptoto 50.00 Mtrs., complete as per specification and as per directions of the Engineer-In-Charge.
50
-
17870.5
... More
- do -Above 50.00 to Upto 100.00 Mtrs
50
-
22763
... More
- do -Above 100.00 to Upto 150.00 Mtrs
50
-
23484
... More
- do -Above 150.00 to Upto 200.00 Mtrs
50
-
27604
... More
- do -Above 200.00 to Upto 250.00 Mtrs
50
-
32651
... More
- do -Above 250.00 to Upto 300.00 Mtrs
50
-
36050
... More
- do -Above 300.00 to Upto 350.00 Mtrs
50
-
41250
... More
- do -Above 350.00 to Upto 400.00 Mtrs
30
-
27000
... More
Supply of ISI mark 175 mm nominal bore, Plain end steel casing pipe - grade of Steel Fee 410 of wall thickness 5.4mm thick confirming to IS 4270:2001 and latest amendments, electric resistance welded steel tube material and confirming to IS 1387/1993 and manufactured by baseic open hearth electric or basic oxygen process in random length of 5 to 7 mts both ends threaded confirming tio IS 554/1985, one end fixied with socket confirming to IS 4270:2001 and the other end with screwed pipes ISI Marking weighing 25.10Kg/mtr (Inclusive of all taxes and durties) Prices include Collar-medium duty., complete as per specification and as per directions of the Engineer-In-Charge.
50
-
66250
... More
Providing 175mm dia collars over borewell including conveying all materials with all lead and watering welding wherever required as directed etc., complete as per the directions of the engineer in-charge of the work., complete as per specification and as per directions of the Engineer-In-Charge.
7
-
1050
... More
Providing and fixing 175mm dia Borewell Cap (MS) Medium class (PRED 2012-13, Pg-iii, I.No-85) material components of., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
100
... More
Providing and installing at site of work P.V.C pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour and lift charges, handling charges including encasing the pipe alround to a depth not less than 15 cms with gravel or selected earth available from the excavation etc - 200mm dia 10 kg /sqm., complete as per specification and as per directions of the Engineer-In-Charge.
13
-
16402.75
... More
PUMPING MACHINERY WORKS : Supply and delivery at site brand New texmo/ innoval/ Lubi/ Sabar / Atalanta/ Calamal/ make suitable for vertical installation in 150mm dia bore well comprising of single stage or multistage CF pump close coupled by measns of stainless steel coupling to suitable HP suitable speed totally enclosed and filled with pure drinking water (Wet type) squirrel cage submersible induction motor suitable for opertation of 3PH., 50 Hz, 380/440 volts AC supply fitted with required aqccessories such as suction, casing suction strainers sand guard Non return value etc. complete . The pump and motor shall form an integral unit with all the required fittings 20HP/15KW 20 stage. ATALANTA/ SUGNA/ CRI/ KIRLOSKAR and other Equivalent Pumps 20 HP 50 Stage., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
94079.24
... More
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to table 3 class 5 of IS:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 & confirming to GTP of GROUP-A. P. No. 12 -(1) 3C x 6 Sqm mm., complete as per specification and as per directions of the Engineer-In-Charge.
700
-
143500
... More
Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) 50mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.6 / 13.3 ( For Pumping Machinery )., complete as per specification and as per directions of the Engineer-In-Charge.
2
-
3617.12
... More
Providing and fixing in position 50mm nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads (For Pumping Machinery )., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
1383.2
... More
Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 90mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing., complete as per specification and as per directions of the Engineer-In-Charge.
350
-
179200
... More
Meter and Panel Board : Supplying and delivery of meter and panel board unit one number of MS box of size 250x380x150mm mechanically strong vermin proof and water proof. The apprerance of the unit shall be neat and dust free. The box shall have two detachable doors and two numbers of spring loaded, latch, locking door, canopy, appron and louver, ventilation shall be provided fabricated out of 1.6mm thick sheet steel. ( For Pumping Machinery )., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
9000
... More
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete as per specification and as per directions of the Engineer-In-Charge.
27750
-
9712.5
... More
Earthing:Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 122 mm dia., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
1950
... More
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery. Cost per KVAR, 1) Group 'A' For Pumping Machinery., complete as per specification and as per directions of the Engineer-In-Charge.
5
-
1800
... More
Fixing a shunt capacitor of … KVAR capacity with necessary clamps, bolts, and nuts to an existing wooden or metal board including banking of more than one capacitor 1) Group 'A' For Pumping Machinery and as per directions of the Engineer-in-charge a)Upto 5 KVAR., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
202
... More
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, Indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. ( Group-A ) and as per directions of the Engineer-in-charge(P No.37, I No.12F Group -A)., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
1584.7
... More
Errection, electrification and commissioning of pumpset/submersible pump including aligning and balancing with all necessary erection material and labour including supply and fitting of two pairs of supporting clamps with necessary material and labour including providing cement concrete foundation bed etc., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
1710
... More
Errection of panel board and meter board unit erection of combined panel and meter board unit with all necessary material and labour including providing cement concrete foundation bed etc., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
425
... More
Supplying of L.T.U.G. cable having aluminium conductor PVC insulated sheathed galvanised steel wire / steel tape armored cable with P.V.C. outer sheathing 1.1K.V class (conforming to IS 1554) 4.00 core 16 Sqare mm., complete as per specification and as per directions of the Engineer-In-Charge.
35
-
5250
... More
Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required, i) In existing trench / duct, a) 6 Sqmm to 16 Sqmm., complete as per specification and as per directions of the Engineer-In-Charge.
25
-
297
... More
Digging of trench of 0.6m deep x 0.50 Mtr wide refilling the trench to the required ground level and consolidating etc., complete i) In existing trench / duct, a) 6 Sqmm to 16 Sqmm., complete as per specification and as per directions of the Engineer-In-Charge.
25
-
1900
... More
Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
260
... More
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete as per specification and as per directions of the Engineer-In-Charge.
3
-
1047
... More
Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class i) In existing trench / duct, a) 6 Sqmm to 16 Sqmm., complete as per specification and as per directions of the Engineer-In-Charge.
6
-
2010
... More
Supplying, fixing and wiring electronic 10 to 40 Amps three phase 4 wire Class-1 Accuracy Energy Meter, 1) Group 'A'., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
4120
... More
Supplying and fixing hylum brand hand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws., complete as per specification and as per directions of the Engineer-In-Charge.
6750
-
1620
... More
RAISING MAIN WORKS : Earth work excavation for foundetion of buildings,culverts,watersupply,sanitary lines 1.5m and above in width, in hardsoil not exceeding 1.5m in depth including dressing the bottom and sides of pitsand trenches,stacking the excavated soil clear from edges of breaking of clods., complete as per specification and as per directions of the Engineer-In-Charge.
9.112
-
4336.77
... More
Providing and laying in position plain cement concrete of mix 1:4:8 - (1:4:8 - (M7.5)) with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Bed Concrete below Pipeline., complete as per specification and as per directions of the Engineer-In-Charge.
1.012
-
5472.9
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 75mm nominal OD pipes., complete as per specification and as per directions of the Engineer-In-Charge.
30
-
57240
... More
Providing and fixing GI fittings a) 80mm dia GI union., complete as per specification and as per directions of the Engineer-In-Charge.
4
-
2512.2
... More
b) 80mm dia GI Elbow., complete as per specification and as per directions of the Engineer-In-Charge.
4
-
1214.76
... More
c) 80mm dia GI Reducer Tees., complete as per specification and as per directions of the Engineer-In-Charge.
4
-
1649.36
... More
GI PIPE INSTALLATION IN MADDURAMMA ROAD: Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as per specifications. i) Lime /Cement Concrete. I. By Manual Means :B. Cement Concrete Grade M-15 & M-20. MORTH Specification., complete as per specification and as per directions of the Engineer-In-Charge.
25.65
-
15430.01
... More
Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods., complete as per specification and as per directions of the Engineer-In-Charge.
38.7
-
12497
... More
Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing., complete as per specification and as per directions of the Engineer-In-Charge.
9.675
-
53310.8
... More
Supply, Installation testing and commissioning of approved make heavy tubes (Class ‘C’) confirming to as per IS1239 Part - I (25mm Nomina lbore 4.05mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick @ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick @ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.-do- Galvanized Iron Pipes 50 mm dia. complete (ITEM NO.40.120.6 page 371 PWD SR 2018-19)
215
-
230574.6
... More
Refilling available earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5 m. including cost of all labour., complete as per specification and as per directions of the Engineer-In-Charge.
29.025
-
3792.99
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing., complete as per specification and as per directions of the Engineer-In-Charge.
25.8
-
148459.39
... More
M S GATE AND ROAD WORKS IN MAHALINGESHWARA SLUM : Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods., complete as per specification and as per directions of the Engineer-In-Charge.
94.86
-
30632.19
... More
Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing., complete as per specification and as per directions of the Engineer-In-Charge.
37.94
-
209055.47
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing., complete as per specification and as per directions of the Engineer-In-Charge.
56.92
-
327531.34
... More
Providing and fixing M.S. Gate as per Chief Architect Drawing, using 50mm x 50mm 14 guage M.S. hollow pipe frame work bent to ornamental shape as shown in the drawing and 35mm x 6mm and 16 x 16mm Square rods for verticals alternatively spaced at 4cms c/c in two halves and 40mmx6mm M.S. flats for horizontal member and at the top cast iron spikes are provided at alternate vertical members asshown in the drawing etc., complete. All the steel surface should be thoroughly cleaned free of rust and painted with anti corrosive paint (shop paint) etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, with lead and lift, loading and unloading charges, etc., complete as per specification and as per directions of the Engineer-In-Charge.
7.5
-
24397.2
... More
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM of machineries, curing, 25x2x1x0.45., complete as per specification and as per directions of the Engineer-In-Charge.
22.5
-
26049.6
... More
Providing and laying cinder concrete in cement 1:15 (1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing., complete as per specification and as per directions of the Engineer-In-Charge.
9
-
19391.4
... More
Sinking of Borewell with raising main and Pumping machinery at Tavarekere Sy.no 5 & 7: Geophysical investigation of site for sinking Borewell for supplying drinking water to the habitation either through the Hand pump, MWS of P.W.S.S by vertical electrical sounding by adopting Venner or Schlumberger's method, including reconnaissance survey of geological formation, Gerophysical investigation of existing Ground Wate in the vicinity, its qualityf 1.0 meter in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instrument and accessories to work site., engaging techinical personal and labour required etc., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
3881
... More
Sinking borewell of 165 mm dia clear using super fast hydraulic rig of capacity 250 PSIG & above CFM & above in all strats including over burden upto 20 mts fixing of casing pipes, collars and cap with necessary cutting, throading and welding including transportation of rig and supporing vehicles, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding coat of casing pipes, collars, cap etc.,) 9.1.1 Uptoto 50.00 Mtrs., complete as per specification and as per directions of the Engineer-In-Charge.
50
-
17870.5
... More
- do -Above 50.00 to Upto 100.00 Mtrs
50
-
22763
... More
- do -Above 100.00 to Upto 150.00 Mtrs
50
-
23484
... More
- do -Above 150.00 to Upto 200.00 Mtrs
50
-
27604
... More
- do -Above 200.00 to Upto 250.00 Mtrs
50
-
32651
... More
- do -Above 250.00 to Upto 300.00 Mtrs
50
-
36050
... More
- do -Above 300.00 to Upto 350.00 Mtrs
50
-
41250
... More
- do -Above 350.00 to Upto 400.00 Mtrs
35
-
31500
... More
Supply of ISI mark 175 mm nominal bore, Plain end steel casing pipe - grade of Steel Fee 410 of wall thickness 5.4mm thick confirming to IS 4270:2001 and latest amendments, electric resistance welded steel tube material and confirming to IS 1387/1993 and manufactured by baseic open hearth electric or basic oxygen process in random length of 5 to 7 mts both ends threaded confirming tio IS 554/1985, one end fixied with socket confirming to IS 4270:2001 and the other end with screwed pipes ISI Marking weighing 25.10Kg/mtr (Inclusive of all taxes and durties) Prices include Collar-medium duty., complete as per specification and as per directions of the Engineer-In-Charge.
35
-
46375
... More
Providing 175mm dia collars over borewell including conveying all materials with all lead and watering welding wherever required as directed etc., complete as per specification and as per directions of the Engineer-In-Charge.
3
-
450
... More
Providing and fixing 175mm dia Borewell Cap (MS) Medium class material components of ., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
100
... More
Providing and installing at site of work P.V.C pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour and lift charges, handling charges including encasing the pipe alround to a depth not less than 15 cms with gravel or selected earth available from the excavation etc., complete as per specification and as per directions of the Engineer-In-Charge.
12
-
15141
... More
PUMPING MACHINERY WORKS : Supply and delivery at site brand New texmo/ innoval/ Lubi/ Sabar / Atalanta/ Calamal/ make suitable for vertical installation in 150mm dia bore well comprising of single stage or multistage CF pump close coupled by measns of stainless steel coupling to suitable HP suitable speed totally enclosed and filled with pure drinking water (Wet type) squirrel cage submersible induction motor suitable for opertation of 3PH., 50 Hz, 380/440 volts AC supply fitted with required aqccessories such as suction, casing suction strainers sand guard Non return value etc. complete . The pump and motor shall form an integral unit with all the required fittings 20HP/15KW 50 stage. ATALANTA/ SUGNA/ CRI/ KIRLOSKAR and other Equivalent Pumps 20 HP 50 Stage., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
94079.24
... More
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to table 3 class 5 of IS:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 & confirming to GTP of GROUP-A. P. No. 12 - (1) 3C x 6 Sqm mm., complete as per specification and as per directions of the Engineer-In-Charge.
500
-
102500
... More
Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) 50mm nominal bore including cost of all materials, labour and HOM of equipments with all leads( For Pumping Machinery )., complete as per specification and as per directions of the Engineer-In-Charge.
2
-
3617.12
... More
Providing and fixing in position 50mm nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads( For Pumping Machinery )., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
1383.2
... More
Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 90mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing ., complete as per specification and as per directions of the Engineer-In-Charge.
300
-
153600
... More
Meter and Panel Board : Supplying and delivery of meter and panel board unit one number of MS box of size 250x380x150mm mechanically strong vermin proof and water proof. The apprerance of the unit shall be neat and dust free. The box shall have two detachable doors and two numbers of spring loaded, latch, locking door, canopy, appron and louver, ventilation shall be provided fabricated out of 1.6mm thick sheet steel. ( For Pumping Machinery )., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
9000
... More
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., for pumping machinery., complete as per specification and as per directions of the Engineer-In-Charge.
20750
-
7262.5
... More
Earthing:Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 122 mm dia., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
1950
... More
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery. Cost per KVAR, 1) Group 'A' For Pumping Machinery., complete as per specification and as per directions of the Engineer-In-Charge.
5
-
1800
... More
Fixing a shunt capacitor of … KVAR capacity with necessary clamps, bolts, and nuts to an existing wooden or metal board including banking of more than one capacitor 1) Group 'A' For Pumping Machinery and as per directions of the Engineer-in-chargea).Upto 5 KVAR., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
202
... More
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, Indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and ( Group-A )., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
1584.7
... More
Errection, electrification and commissioning of pumpset/submersible pump including aligning and balancing with all necessary erection material and labour including supply and fitting of two pairs of supporting clamps with necessary material and labour including providing cement concrete foundation bed etc., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
1710
... More
Errection of panel board and meter board unit erection of combined panel and meter board unit with all necessary material and labour including providing cement concrete foundation bed etc., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
425
... More
Supplying of L.T.U.G. cable having aluminium conductor PVC insulated sheathed galvanised steel wire / steel tape armored cable with P.V.C. outer sheathing 1.1K.V class (conforming to IS 1554) 4.00 core 16 Sqare mm., complete as per specification and as per directions of the Engineer-In-Charge.
25
-
3750
... More
Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required, i) In existing trench / duct, a) 6 Sqmm to 16 Sqmm., complete as per specification and as per directions of the Engineer-In-Charge.
25
-
297
... More
Digging of trench of 0.6m deep x 0.50 Mtr wide refilling the trench to the required ground level and consolidating etc., complete i) In existing trench / duct, a) 6 Sqmm to 16 Sqmm., complete as per specification and as per directions of the Engineer-In-Charge.
25
-
1900
... More
Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc., Exisiting trence /duct., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
260
... More
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete as per specification and as per directions of the Engineer-In-Charge.
3
-
1047
... More
Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class i) In existing trench / duct, a) 6 Sqmm to 16 Sqmm., complete as per specification and as per directions of the Engineer-In-Charge.
6
-
2010
... More
Supplying, fixing and wiring electronic 10 to 40 Amps three phase 4 wire Class-1 Accuracy Energy Meter, 1) Group 'A'., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
4120
... More
Supplying and fixing hylum brand hand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws., complete as per specification and as per directions of the Engineer-In-Charge.
6000
-
1440
... More
RAISING MAIN WORKS : Earth work excavation for foundetion of buildings,culverts,watersupply,sanitary lines 1.5m and above in width, in hardsoil not exceeding 1.5m in depth including dressing the bottom and sides of pitsand trenches,stacking the excavated soil clear from edges of breaking of clods, By Manual means(in Hard Soil)., complete as per specification and as per directions of the Engineer-In-Charge.
75.94
-
36142.88
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 75mm nominal OD pipes., complete as per specification and as per directions of the Engineer-In-Charge.
40
-
76320
... More
Providing and fixing GI fittings, a) 80mm dia GI union., complete as per specification and as per directions of the Engineer-In-Charge.
10
-
6280.5
... More
b) 80mm dia GI Elbow., complete as per specification and as per directions of the Engineer-In-Charge.
10
-
3036.9
... More
c) 80mm dia GI Reducer Tees., complete as per specification and as per directions of the Engineer-In-Charge.
10
-
4123.4
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) - 25mm nominal OD pipes., complete as per specification and as per directions of the Engineer-In-Charge.
30
-
9317.4
... More
Providing and fixing in position brass bib cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads ., complete as per specification and as per directions of the Engineer-In-Charge.
20
-
3667.6
... More
Making connection of G.I distribution branch with G.I main of 25 to 40mm. nominal bore, including cutting and threading the pipes, providing and fixing Tee, nuts, labour for all item of works, testing and HOM of equipments., complete as per specification and as per directions of the Engineer-In-Charge.
20
-
10239.6
... More
Cistern : Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods., complete as per specification and as per directions of the Engineer-In-Charge.
2.88
-
912.79
... More
Providing and laying in position plain cement concrete of mix 1:4:8 - (1:4:8 - (M7.5)) with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing., complete as per specification and as per directions of the Engineer-In-Charge.
1.95
-
10545.83
... More
Providing and constructing granite / trap / basalt size stone masonry in foundation with cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing., complete as per specification and as per directions of the Engineer-In-Charge.
1.92
-
9353.78
... More
Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing., complete as per specification and as per directions of the Engineer-In-Charge.
4.8
-
27897.5
... More
Providing and laying in position plain cement concrete of mix 1:2:4 - (1:2:4 - (M15)) with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing., complete as per specification and as per directions of the Engineer-In-Charge.
1.47
-
8448.56
... More
– do – Providing ruled pointing to coursed stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing., complete as per specification and as per directions of the Engineer-In-Charge.
10
-
1505.2
... More
Providing and supplying of RCC Hume pipe pre cast cistern of size1.20mtr inner dia and 2.50mtr height with top cover etc.complete including conveyance, transportation to the work spot and other insidental charges with all lead and lift loading and unloading., complete as per specification and as per directions of the Engineer-In-Charge.
1
-
11651
... More
Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4 - (1:2:4 - (M15)) and finished with CM 1:3 plastering and finishing cutting etc., complete. - of size 450 x 200 x 400 mm., complete as per specification and as per directions of the Engineer-In-Charge.
10
-
4770
... More
Providing 15mm thick cement plaster in single coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing., complete as per specification and as per directions of the Engineer-In-Charge.
10
-
2204.8
... More
Providing floating coat of cement to plastering and finishing smooth, including cost of materials, labour, curing., complete as per specification and as per directions of the Engineer-In-Charge.
10
-
201.4
... More
BESCOM Deposit and Other Charges (GST amount not including for this item) Bescom deposits payment made based on Bescom recepits).
1
-
30000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements