Karnataka Power Transmission Corporation Limited Tender

Providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.

Providing and applying floor painting with ready mix paint in two coats (excluding priming coat) on new concrete / asbestos cement sheet / plastered surfaces brushing to give an even shade after preparing the surface after thoroughly cleaning oil, dirt, dust other foreign matter and sand papering including cost of materials, labour, complete as per specifications.

Repairs to plaster in patches of 2.5 sqm and less in walls, ceilings 10 to 20mm thick cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specifications.

Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry and concrete surface including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing, complete as per specification. With water proofing compound etc., complete.

Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry and concrete surface including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing, complete as per specification. __ do __ without W.P.C.

Providing Mathi / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as per specifications.

Cost of fittings for doors and windows. Supplying and fixing 5" hinges.

Supplying and fixing 6" M.S Handle.

Supplying and fixing 8" aldrap.

Supplying and fixing �" Screw box.

Supplying and fixing 6" Tower bolt.

Labour charges for easing of doors and windows and repair works. a) Carpenter Class I with tools.

b) Carpenter Assistant.

Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized Isopthalic Gelcoat and on layer of 45 gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments.

Providing and fixing 65mmx90mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM). U.V-stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0 mm. The doorframe consists of four segmens, which are provided with plug-in-socket arrangement insitu in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement of 6 locations fro high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/Plaster with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size S shaped M.S. flat hold fast shall be provided with the frame.

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (internal work exposed on wall) a) 20mm nominal OD pipes.

b) 25mm nominal OD pipes.

Cost of fixtures for water supply and sanitary Supplying and fixing 1 �" waste pipe.

Supplying and fixing 1 �" Coupling

Supplying and fixing �" X �" CPVC R. Elbow.

Supplying and fixing 3" PVC Nahani trap

Supplying and fixing 3" Grating

Supplying and fixing �" C.P. Tap heavy duty.

Supplying and fixing �" CPVC Tee

Supplying and fixing �" CPVC union

Supplying and fixing �" CPVC Nipple

Labour charges for plumbing work. a) Licensed plumber with tools.

b) Helper (Mazdur Heavy)

Providing and fixing on wall surface 4.0 kg/sq.cm H.D.P.E. rain down water pipes 110mm outer dia, approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, complete as per specifications.

Cleaning the blockages of Closets and soil pipes putting into working order without scaffolding.

__do __ underground stoneware pipes.

Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, (approved make) cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Providing and laying flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete, using broken granite metal of 12.5mm nominal size and top layer of 10mm thick plaster with cement mortar 1:3, finished with floating coat of neat cement , including cost of materials, labour, curing, complete as per specifications.

Dismantling labour charges for Chejja and removing the debris of RCC box type.

Providing 18mm thick cement plaster in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Labour charges for removing steel window shutter by using necessary cutting machine and stacking the same at the place specified.

Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300 Kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.64 cum and fine aggregates @ 0.43cum, with superplastisiser @ 3 lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed extra for use of water proofing compound in cement concrete of mix M20, at one kg of compound per bag of cement concrete laid in layers not exceeding 15cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Screeding concrete with W.P.C.

Providing and laying in position plain cement concrete of mix M7.5 with OPC cement @180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, concrete laid in layers not exceeding 15cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 5.0Newton per sqmm (table moulded) with cement mortar 1:6 for basement and superstructu/re including cost of materials, labour charges, scaffolding, curing complete as per specifications.

Providing and fixing 4mm thick glass panes to steel windows including luppum with two coats of approved paint.

Labour charges and hire charges of transport vehicle for disposal of the debris from the stacking place to the final dumping yard approved by BBMP outside city limits. Tractor load. (MR + taxes)

Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame section of size 61.85x31.75mm. With 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, rawl plugs, or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium sections pretreated for removal of any Specification. -do- using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality. (PWD SR 2018-19 P – 35 /I – 7.11.2)

Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of approved make, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special adhesive for flooring, skirting and jointed with neat cement slurry mixed with pigment to match shade of tiles, including providing spacers at required interval and removing stains etc., cost of materials, mortar, labour etc., complete as per specification.

Cleaning of glazed tiles. including cost of materials, labour, HOM complete as per specifications.

Material & Labour for applying two coats of acrylic polymer coat using 'Brush bond RFX' of "FOSROC chemicals" or equivalent as per manufacturers instructions including preparation of concrete surfaces by suitable means to remove dust and loose materials etc., over the surface of the roof as per direction of Engineer incharge of the work. (MR)

Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.(LED light fighting 1 x4'- 20/22 w)

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. completefor each outlet. a) Short point upto 3Mtr from tapping point to out let via switch

b) Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch.

c) Long point above 6Mtr upto 10Mtr from tapping point to out let via switch.

Labour charges for repairs to electrification, fixtures, wiring etc., Licensed Electrical wireman with tools.

Linemen.