Karnataka Power Transmission Corporation Limited Tender

Item04 - Painting with Acid Proof Paint of approved brand and manufacture of required colour to give an even shade in 2 coats as per specifications and as per directions of Engineer in charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item05 - Providing and laying in position plain cement of mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including cost of centring shuttering strutting propping etc., & removal of form work with all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications ---- The contractor shall quote item wise rates in the tender Excluding GST

Item06 - Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer in- Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item07 - Providing vitrified tiles 60 x 60cms of with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. approved make, shade and size for flooring laid on a bed of 12mm thick cement mortar 1:3 mix, flush pointing with white cement using colour pigment, including cost of materials, labour, curing complete as per specification ---- The contractor shall quote item wise rates in the tender Excluding GST

Item08 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications and directions of the Engineer-in-charge of the work ---- The contractor shall quote item wise rates in the tender Excluding GST

Item09 - Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item10 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item11 - Dismantling of existing tile work by manual means in cement mortor including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead ---- The contractor shall quote item wise rates in the tender Excluding GST

Item12 - Stocking and disposal of debris ---- The contractor shall quote item wise rates in the tender Excluding GST

Item13 - Repairs to plaster in patches of 2.5 sqm and less in walls, ceilings 10 to 20mm thick in cement mortar 1:6 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specifications ---- The contractor shall quote item wise rates in the tender Excluding GST

Item14 - Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item15 - Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications ---- The contractor shall quote item wise rates in the tender Excluding GST

Item16 - Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes of 25 mm dia conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings . This includes jointing of pipes and fittings with one step CPVC solvent cement , trenching, refilling and testing of joints complete ---- The contractor shall quote item wise rates in the tender Excluding GST

Item17 - supplying and fixing of modular switch socket/ stepped electronic fan regulator/ dimmer/telephone socket a) 6Amps one way ---- The contractor shall quote item wise rates in the tender Excluding GST

Item18 - b) 6Amps 3 way socket ---- The contractor shall quote item wise rates in the tender Excluding GST

Item19 - c) Stepped Fan regulator ---- The contractor shall quote item wise rates in the tender Excluding GST

Item20 - Supplying and fixing superior quality modular switch 6-8 Way mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box ---- The contractor shall quote item wise rates in the tender Excluding GST

Item21 - Supplying patti type fluorescent tube light fitting of LED light fitting LED light fitting LED light fitting 1 x 4' - 20/22 W fluorescent tube fitting, made out of M.S. Sheet and stove enameled with HF Electronic Ballast , locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230 volts AC . Supply including T5 lamp ---- The contractor shall quote item wise rates in the tender Excluding GST

Item22 - Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- The contractor shall quote item wise rates in the tender Excluding GST

Item23 - Supplying of Ceiling Fan 48" Sweep 5 Star (1200 mm)with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty ---- The contractor shall quote item wise rates in the tender Excluding GST

Item24 - Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired ---- The contractor shall quote item wise rates in the tender Excluding GST