Karnataka Power Transmission Corporation Limited Tender

____do___ S.F.

____do___ T.F.

____do___ F.F.

Providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.

Repairs to plaster in patches of 2.5 sqm and less in walls, ceilings 10 to 20mm thick cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specifications.

Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry and concrete surface including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing, complete as per specification. With water proofing compound etc., complete.

Providing Mathi / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as per specifications.

Cost of fittings for doors and windows. Supplying and fixing 5" hinges.

Supplying and fixing 6" M.S Handle.

Supplying and fixing 8" aldrap.

Supplying and fixing �" Screw box.

Supplying and fixing 6" Tower bolt.

Labour charges for easing of doors and windows and repair works. a) Carpenter Class I with tools.

b) Carpenter Assistant.

Providing two legged scaffolding for brick masonry work using 10-15 cms. dia best quality Casurina poles of 4m over all length (3m +0.5m projection + 0.5m In to the ground) the distance between two rows being 1.25m and spacing of post being 2m in both rows with 2 horizontal posts with 0.5 mm overlap on either side and braces at 2 m c to c including longitudinal and transveres middle braces to step up and providing platform with casurina poles, forms tied up using coir rope complete as per specifications - for non modular brick work

Dismantling the tile work in floor and roof laid in cement or surki mortar including stacking the materials with in 50 m lead of tiles thickness 10mm to 25mm. including cost of materials, labour, HOM complete as per specifications.

Providing Ceramic tiles of approved make,shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment , including cost of materials, labour, curing, complete as per specifications.

Colour glazed tiles 30x60 cms 6mm thick with border of size 30 x 10 cms.

Providing and fixing white vitreous china clay, water closet European type (Pedestal type, P-trap) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Providing and fixing 453x357mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour complete as per specifications.

Removing and refixing aluminium partition with necessary additions, alterations as per requirement including cost of all materials, labour charges, HOM of machinery etc., complete as per specifications and directions of Engineer incharge of the work.

Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized Isopthalic Gelcoat and on layer of 45 gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments.

Providing and fixing 65mmx90mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM). U.V-stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0 mm. The doorframe consists of four segmens, which are provided with plug-in-socket arrangement insitu in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement of 6 locations fro high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/Plaster with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size S shaped M.S. flat hold fast shall be provided with the frame.

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (internal work exposed on wall) 20mm nominal OD pipes.

b) 25mm nominal OD pipes.

Providing, fabricating, assembling and fixing in position aluminium partitions using aluminium sections of mat finish or glassy finish in combination of plain grove, single grove and double grove as per requirements for the frames of overall size 63.5mm x 38.1mm. with thickness of 2mm. having section weight, plain sections 1.054kg/m, single grove thickness 1.95mm. section weight 1.094kg/m, double grove thickness 1.9mm section weight 1.094kg/m and bottom member 114.3 mm. x 44.45mm. thickness 3.18mm. weight 2.646 kg/m; aluminium louvres section of size 36.5mmx34.93mm 1.45mm. thick section weight 0.429kg/m; bottom portions provided with 12mm. thick prelaminated sheet both sides of approved colour lamination exterior grade upto 0.9m height, spacing of vertical member not exceeding 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded sub dividing frames tennoned and rivetted to the frames; the assembled frame stiffened with corner angles, stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistelling and making good with cement mortar to match the surface; providing and fixing 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with louvres sections; the glass and panels fitted with glazing clips of 19mmx17.3mm. of thickness 0.9mm. weight 0.124kg/m, aluminium sections treated for removal of any rust and prevention of further rust formation, coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable sized holes and fixing with cement mortar, with necessary opening for fixing of door of standard size (excluding cost of door ) all the frame thoroughly cleaned, free from rust, scale or dirt including cost of materials, fixtures, labour and HOM complete as per specifications. -do- using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.

Providing and fixing C.P. brass towel rail 740mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications.(

Providing pedestal for wash basin of approved 1st quality and make conforming to ISI Specifications and fixing for low down cistern as directed .Rate includes cost of materials and conveyance to work spot. (PWD SR 2018-19 P - 89 / I - 12.108)

Cost of fixtures for water supply and sanitary Supplying and fixing 1 �" waste pipe.

Supplying and fixing 1 �" Coupling

Supplying and fixing �" X �" CPVC R. Elbow.

Supplying and fixing 3" PVC Nahani trap

Supplying and fixing 3" Grating

Supplying and fixing �" C.P. Tap heavy duty.

Supplying and fixing �" CPVC Tee

Supplying and fixing �" CPVC union

Supplying and fixing �" CPVC Nipple

Labour charges for plumbing work. a) Licensed plumber with tools.

b) Helper (Mazdur Heavy)

Providing and fixing on wall surface 4.0 kg/sq.cm H.D.P.E. rain down water pipes 110mm outer dia, approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, complete as per specifications.

Cleaning the blockages of Closets and soil pipes putting into working order without scaffolding.

__do __ underground stoneware pipes.

Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300 Kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.64 cum and fine aggregates @ 0.43cum, with superplastisiser @ 3 lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed extra for use of water proofing compound in cement concrete of mix M20, at one kg of compound per bag of cement concrete laid in layers not exceeding 15cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Screeding concrete with W.P.C.

Providing and laying in position plain cement concrete of mix M7.5 with OPC cement @180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, concrete laid in layers not exceeding 15cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Providing and fixing 4mm thick glass panes to steel windows including luppum with two coats of approved paint.

Labour charges and hire charges of transport vehicle for disposal of the debris from the stacking place to the final dumping yard approved by BBMP outside city limits. Tractor load. (MR + taxes)

Atotic Polypropylene Providing and laying Water proofing with single layer of 3mm thick granule finish @ 4.5kg/sqm using Atotic Polypropylene membranes (APP) with overlap of 100mm at every joints including applying bitumen emulsion priming coat over the dry surface, including scarifying the surface and removing dust and foreign materials removing debris and cleaning surface with wire brush to give even surface. The work shall be carried out as per the instructions of Engineer in charge of the work

Dismantling plastering and removing the debris with a lead upto 200m. including cost of materials, labour, HOM complete as per specifications.

Providing 18mm thick cement plaster in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. – do – cement mortar 1:4

Material & Labour for applying two coats of acrylic polymer coat using 'Brush bond RFX' of "FOSROC chemicals" or equivalent as per manufacturers instructions including preparation of concrete surfaces by suitable means to remove dust and loose materials etc., over the surface of the roof as per direction of Engineer incharge of the work. (MR)