Karnataka Power Transmission Corporation Limited Tender

Item04 - Painting with Acid Proof Paint of approved brand and manufacture of required colour to give an even shade in 2 coats as per specifications and as per directions of Engineer in charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item05 - Providing and fixing aluminium work with Powder coated aluminium 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections of approved make conforming to IS specification, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and directions of the Enginer-in-charge of the work. ---- The contractor shall quote item wise rates in the tender Excluding GST

Item06 - Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item07 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item08 - Providing and fixing Powder coated minimum thickness 50 micron aluminium locks, Door stopper, handle with with SS screws,including cost of materials, labour, usage charges of machinery complete as per specifications.complete as per direction of Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item09 - Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 1000 mm), with necessary accessories and screws etc. complete ---- The contractor shall quote item wise rates in the tender Excluding GST

Item10 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry Ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item11 - Cleaning of tiles with acid both floor and walls of toilets for removal stains including cost of materials, labour, HOM complete as per specifications ---- The contractor shall quote item wise rates in the tender Excluding GST

Item12 - Providing and fixing Fiber Glass Reinforced Door frame of c/s 90mm x45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block all the 3 legs . The frame shall be covered with fiber glass from all sides MS Stttttay shall be provided at the bottom to steady to frame ---- The contractor shall quote item wise rates in the tender Excluding GST

Item13 - Providing and fixing 30mm thick Fiber Glass Reinforced panelled door shutter of required color and approved brand and manufacture made with fire retardant grade unsaturated polyester resin moudled to 3 mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels conforming to IS 14856 including fixing to frame ---- The contractor shall quote item wise rates in the tender Excluding GST

Item14 - Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item15 - Providing & fixing corrugated G.S. sheet roofing 0.63 mm thick with zinc coating not less than 275 g/ m² including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I.limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical curved surfaces), excluding the cost of afters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item16 - Providing and fixing on wall surface unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382,leaving 10mm gap for thermal expansion,(i) Single socketed pipes1 00mm diameter ---- The contractor shall quote item wise rates in the tender Excluding GST

Item17 - Repairing and fixing shutters panelled or glazed to doors, windows including cost of material, labour ---- The contractor shall quote item wise rates in the tender Excluding GST

Item18 - Providing and fixing White Vitreous China Wash basin size 550x400 mm with a pair of 15mm C.P. brass pillar taps with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: ---- The contractor shall quote item wise rates in the tender Excluding GST

Item19 - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete ---- The contractor shall quote item wise rates in the tender Excluding GST

Item20 - Providing and fixing PTMT towel rail 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190g complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. including cost of materials, labour complete as per specifications ---- The contractor shall quote item wise rates in the tender Excluding GST

Item21 - supplying and fixing of modular switch socket/ stepped electronic fan regulator/ dimmer/telephone socket a) 6Amps one way ---- The contractor shall quote item wise rates in the tender Excluding GST

Item22 - b) 6Amps 3 way socket. ---- The contractor shall quote item wise rates in the tender Excluding GST

Item23 - Supplying patti type fluorescent tube light fitting of LED light fitting LED light fitting LED light fitting 1 x 4' - 20/22 W fluorescent tube fitting, made out of M.S. Sheet and stove enameled with HF Electronic Ballast , locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230 volts AC . Supply including T5 lamp. ---- The contractor shall quote item wise rates in the tender Excluding GST

Item24 - Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- The contractor shall quote item wise rates in the tender Excluding GST

Item25 - Industrial type LED fitting light fitting 1 x 4' - 20/22 W including cost of material and fixing ---- The contractor shall quote item wise rates in the tender Excluding GST

Item26 - Supplying of Ceiling Fan 48" Sweep 5 Star (1200 mm)with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty ---- The contractor shall quote item wise rates in the tender Excluding GST

Item27 - Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin wisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- The contractor shall quote item wise rates in the tender Excluding GST