Karnataka Power Transmission Corporation Limited Tender

004 - Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. KPWD SR 2023-24 (vol-2) 187/19.3

005 - Transporting the existing old chainlink mesh etc. to the nearest store including loading and unloading the materials etc. complete as per directions of the Engineer-in-Charge.

006 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m KPWD SR 2023-24 (vol-1) 5/1.4.1

007 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. KPWD SR 2023-24 (vol-1) 7/1.8

008 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications. KPWD SR 2023-24 (vol-2) 7/1.10

009 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates KPWD SR 2023-24 (vol-1) 15/2.1.2

010 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). KPWD SR 2023-24 (vol-2) 9/5.4

011 - Casting and erecting RCC fencing poles at site of size 0.15x0.15x3.90m with reinforced cement concrete of mix 1:1.5:3 with 20mm and down size graded granite metal, clean seived white sand, machine mixed, concrete laid in layers not exceeding 15cms thick, vibrated. The pole shall comprise of 4 no's of 12mm dia tor steel bars at corners and 8mm dia tor rings at 200mm C/C Spacing , including shuttering for pole casting , fabrication of steel etc as per design and drawing with suitable holes & GI pins to fix chain link mesh and barbed wire as per the direction of Engineer-in-charge complete including cost of all materials, labour, HOM of machinary, curing, complete as per specifications. Data Rate

012 - Casting and erecting RCC strut poles at site of size 0.15x0.15x3.05m with reinforced cement concrete of mix 1:1.5:3 with 20mm and down size graded granite metal, clean seived white sand, machine mixed, concrete laid in layers not exceeding 15cms thick, vibrated. The pole shall comprise of 4 no's of 12mm dia tor steel bars at corners and 8mm dia tor rings at 200mm C/C Spacing , including shuttering for pole casting , fabrication of steel etc as per design and drawing with suitable holes & GI pins to fix chain link mesh and barbed wire as per the direction of Engineer-in-charge complete including cost of all materials, labour, HOM of machinary, curing, complete as per specifications. Data Rate

013 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia 4 mm). KPWD SR 2023-24 (vol-2) 95/11.58

014 - Ruled / Flush pointing on Sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ) :1/2 marble dust(The rate is inclusive of all materials & labours involved except scaffolding). KPWD SR 2023-24 (vol-2) 213/21.5

015 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. KPWD SR 2023-24 (vol-1) 18/2.11(h)

016 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Including centering, shuttering to the footing @ 8% of concrete work finished rate of concrete per m3. KPWD SR 2023-24 (vol-1) 16/2.3.1

017 - RCC M20 Including centering, shuttering to the column @ 70% of concrete work finished rate of concrete per m3. KPWD SR 2023-24 (vol-1) 16/2.3.1

018 - RCC M20 Including centering, shuttering to the plinth beam @ 50% of concrete work finished rate of concrete per m3. KPWD SR 2023-24 (vol-1) 16/2.3.1

019 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. KPWD SR 2023-24 (vol-2) 14/6.8

020 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Including centering, shuttering to the coping @ 3% of concrete work finished rate of concrete per m3. KPWD SR 2023-24 (vol-1) 15/2.1.4

021 - Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. KPWD SR 2023-24 (vol-2) 77/11.1

022 - Providing and fixing mild steel gate with alround 50mm dia medium duty pipe, inside provided with 20mm dia MS rods spaced at 12.50cms c/c along with 25mm x 6mm MS sheet at centre for the entire width. The scope of the work also includes providing hinges, tower bolts, aldrops, wheels & other essentials required for errection & smooth operation of the gate with provision of vicate gate, including two coats of synthetic enamel paint over a coat of red oxide.

023 - Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.With G.I. barbed wire. KPWD SR 2023-24 (vol-2) 95/11.57.1

024 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. KPWD SR 2023-24 (vol-2) 42/8.8

025 - Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete. KPWD SR 2023-24 (vol-2) 71/10.18

026 - Stainless steel lettering to the station compound wall including fixing charges etc. complete as per directions of the Engineer-in-charge. a) Gate side wall English letters

027 - b) Gate side wall Kannada letters

028 - Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. KPWD SR 2023-24 (vol-2) 45/8.27

029 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. KPWD SR 2023-24 (vol-2) 46/8.30

030 - Supply of LED gate pillar top lantern with pressure die cast alumin ium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/1 EC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Post Top Lantern with 35 watts MR

031 - Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. KPWD SR 2023-24 (v-6) 2/1.2.1

032 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5sqmm KPWD SR 2023-24 (v-6) 5/2.3.3