Karnataka Power Transmission Corporation Limited Tender

Item04 - Painting with Acid Proof Paint of approved brand and manufacture of required colour to give an even shade in 2 coats as per specifications and as per directions of Engineer in charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item05 - Cleaning of tiles with acid both floor and walls of toilets for removal stains including cost of materials, labour, HOM complete as per specifications ---- The contractor shall quote item wise rates in the tender Excluding GST

Item06 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications and directions of the Enginer-in-charge of the work ---- The contractor shall quote item wise rates in the tender Excluding GST

Item07 - Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item08 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item09 - Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 1000 mm), with necessary accessories and screws etc. complete ---- The contractor shall quote item wise rates in the tender Excluding GST

Item10 - Providing and fixing Powder coated minimum thickness 50 micron aluminium tubular handle bar locks, Door stopper with with SS screws,including cost of materials, labour, usage charges of machinery complete as per specifications. complete as per direction of Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item11 - Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Powder coated minimum thickness 50 micron aluminium including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item12 - Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item13 - Providing & fixing corrugated G.S. sheet roofing 0.63 mm thick with zinc coating not less than 275 g/ m² including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I.limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ verticalor curved surfaces), excluding the cost of afters and trusses and including cutting to size and shape wherever required as per thedirection of Engineer in charge ---- The contractor shall quote item wise rates in the tender Excluding GST

Item14 - Providing 15mm thick cement plaster with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, including Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications ---- The contractor shall quote item wise rates in the tender Excluding GST

Item15 - Dismantling of existing Chejja including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead Dismantling by manual means-RCC grade M-20 & above ---- The contractor shall quote item wise rates in the tender Excluding GST

Item16 - supplying and fixing of modular switch socket/ stepped electronic fan regulator/ dimmer/telephone socket a) 6Amps one way ---- The contractor shall quote item wise rates in the tender Excluding GST

Item17 - b)6Amps 3 way socket ---- The contractor shall quote item wise rates in the tender Excluding GST

Item18 - c)stepped Fan regulator ---- The contractor shall quote item wise rates in the tender Excluding GST

Item19 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.b)8 Module ---- The contractor shall quote item wise rates in the tender Excluding GST

Item20 - Supplying patti type fluorescent tube light fitting of LED light fitting LED light fitting LED light fitting 1 x 4' - 20/22 W fluorescent tube fitting, made out of M.S. Sheet and stove enameled with HF Electronic Ballast , locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230 volts AC . Supply including T5 lamp ---- The contractor shall quote item wise rates in the tender Excluding GST

Item21 - Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girder ---- The contractor shall quote item wise rates in the tender Excluding GST

Item22 - Supplying of Ceiling Fan 48" Sweep 5 Star (1200 mm)with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty ---- The contractor shall quote item wise rates in the tender Excluding GST

Item23 - Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin wisted wire of approved quality, mounted on a suitable size wooden board and wired ---- The contractor shall quote item wise rates in the tender Excluding GST

Item24 - Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply ---- The contractor shall quote item wise rates in the tender Excluding GST

Item25 - Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire ---- The contractor shall quote item wise rates in the tender Excluding GST