Karnataka Power Transmission Corporation Limited Tender

Providing and finishing external walls in two coats with ACE exterior emulsion painting of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter inclding cost of materials, labour, complete as per specifications-Second floor

Providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.

Providing and applying enamel paint two coats (excluding priming coat) on new steel or other metal surface brushing to give an even shade, cleaning the oil, grease, dirt and foreign matter, including cost of materials, labour, complete as per specifications.

Repairs to plaster in patches of 2.5 sqm and less in walls, ceilings 10 to 20 mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50 m including curing cost of materials, labour, complete as per specifications.

Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry and concrete surface including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing, complete as per specification

Providing and constructing laterite size stone masonry including cost and conveyance of materials curing etc complete as per specification For Superstructure in C M 1:6 (Cement 45Kgs/cum)

Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods and ornamental arrows as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications.

Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26. 7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar - do- using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality

Fabrication supplying and erecting M.S. tubular trusses of all spans as per approved drawing & design with prefabricated steel applications using quality material and are durable, reliable and corrosion and abrasion resistant. Welding shall confirm to latest structural welding code. Quality shall be on various parameters like shape, size, design gauge and polish. The entire trusses is anchored in RCC column by using 4 nos of M.S. anchor bolts at each support with 1Omm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S. pipes and welding wherever necessary and applying one coat of redoxide primer coat to all the members including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, letc., complete as per specification

Providing Mathi / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as per specifications.

Providing and fixing flush door shutter made out of solid core black board type, well seasoned chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame all-round door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door using liquid phenol formaldehyde resin as per IS specification 2202 (Part-1) 1991. From manufacturer (Factory) complete as per specification.do- - 35mm thick one side teak and one side commercial

Providing and fixing flush door shutter made out of solid core black board type, well seasoned chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame all-round door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door using liquid phenol formaldehyde resin as per IS specification 2202 (Part-1) 1991. From manufacturer (Factory) complete as per specification.do- - 35mm thick both side commercial

Providing and fixing factory made single leaf rigid GRP Sandwich composite door shutter of 32 mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V. - stabilized Isopthalic Gel coat and on layer of 450 gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.5 mm Expanded polystyrene (EPS) structural foam panel of 29 mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Sal wood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles etc., shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material,the salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites design centre Standards and specifications and the door shutters tested in confirmation to IS 4020-1994. the finish of shutter will be plain color White / Ivory / Beige/ Light Grey or any other color using high quality pigments. Excluding cost of fixtures and inclusive of supply of shutters to respective work spot.

Providing and fixing in position fully glazed window shutters with Honne wood styles and rails of 25mm. thick, 75mm wide in single shutters with 4mm thick plain glass fixed with wooden beading including cost of materials, labour charges, HOM of machineries complete as per specifications. (excluding cost of fixtures)

Repairing and fixing shutters (paneled or glazed) to doors, windows, ventilators and cupboards. including cost of materials, labour, HOM complete as per specifications.

Easing of shutters of door.

Easing of window shutters.

Supplying and fixing 10'' Aldrop (Solid Straight Stainless Steel Door Aldrop (2 Nuckle, 1 Kunda) 10" Satin Finish)

Supplying and fixing 4'' Hinges. (Stainless Steel SS304 Double Ball Bearing Door Hinge Length 3 inch Width 2.5 inch Thickness 2.5 MM (12 Gauge) Finish Satin SS)

Supplying and fixing 6'' M.S Handle. (Full Round On Plate Stainless Steel Door Handle 6" Satin Finish)

Supplying and fixing 6'' Tower bolt. (Stainless Steel Plain Tower Bolt 6 Inches )

Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete. (external work). 25mm nominal OD Pipes.

Cost of fixtures for water supply and sanitary Supplying and fixing 1 1/4" waste pipe.

Supplying and fixing 1 1/4" Coupling

Supplying and fixing 3/4" x 1/2'' R. Elbow.

Supplying and fixing 3'' PVC Nahani trap

Supplying and fixing 3'' Grating

Providing and fixing in position brass bib cock of approved quality nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications 20 mm dia nominal bore.

Licensed plumber with tools.

Helper (Mazdoor Heavy)

Providing and fixing on wall surface 4.0 kg/ sq.cm H.D.P.E. rain down water pipes 110mm outer dia approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, curing, complete as per specifications.

Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, (approved make) cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6Amps one way Switch

Licensed electric Wiremen fitter with tools.

Line man.

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 times treatment with powder coated paint and finally finished with approved colour etc., complete-14SWG

PROVIDING TRAPEZOIDAL PROFILED SHEET Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening and crimped to required curvature. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses.

Providing and installing of approved make pre painted Galvalume iron Accessories, like, plain, ridges, plain gutter, plain flashing, corner Trim, etc. The total coated thickness (TCT) of the sheet shall be 0.47 mm +/- 0.02 tolerance mm Zinc-Alu Alloy coating AZ 150 gsm as per ASTM 1397/755 -550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling / self tapping screws of 25 mm length. (width upto 500-600 mm only), to be fixed over the existing purlins, rafters, channels and trusses.