Karnataka Power Corporation Limited Tender

code04 - 16 Sqmm Compression type Aluminium Tubular in Line Connector for Aluminum Conductor

code05 - 70 Sqmm Compression type Aluminium Tubular in Line Connector for Aluminum Conductor

code06 - 185 Sqmm Compression type Aluminium Tubular in Line Connector for Aluminum Conductor

code07 - 10 to 16 Sqmm Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 : HS Type

code08 - 120 to 225 Sqmm Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 : HS Type

code09 - Supply of GI Pipe B - Class as per IS-1239 GI Pipe - 100 mm Dia"

code10 - Cable Covering Tile 125x250x40 mm

code11 - RCC Hume Pipe 2000 mm long 150 mm Dia

code12 - Collars for RCC Hume Pipe 150 mm Dia

code13 - Route & Joint indicating slab with MS Anchor rod

code14 - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.

code15 - Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. In Hard Soil

code16 - Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr

code17 - Tar Road ,"Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches.

code18 - Cement Concrete Road, Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches.

code19 - RCC Pipe,Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete

code20 - Covering cable with Tiles ,Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete

code21 - Fixing of Route Joint Indicating Slab, Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete

code22 - 2.5 to 25 Sqmm Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

code23 - 35 to 95 Sqmm Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

code24 - 120 to 240 Sqmm Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

code25 - Providing and Laying in position plain cement cocrente of mix 1:2:4 with Cement @ 240 Kgs, with 20 mm and down size graded granite metal coarse aggregates @ 0.878 CMT and fine aggregtes @ 0.459 CMT machine mixed concrete laid in layers not exceeding 15 cm. thick well compacted, in foundation and plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. SPECIFICATION No. KBS 4.1, 4.2

code26 - Supplying heavy gauge PVC conduit pipe 40mm dia 2.5mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.

code27 - Supplying PVC/GI flexible conduit pipe 50 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely

code28 - 8 m - Top 70 mm and Bottom 135 mm dia,Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom . mm , top. mm with 3 mm thick,suitable base plate and 4Nos of . long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.

code29 - Single Arm Bracket with 1500 mm Standard 40/50 mm dia Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.

code30 - 50 x 50 x 6 mm Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

code31 - 75 x 150 x 75 x 6 mm C channel Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

code32 - 3C x 2.5 mm2 "Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:2010

code33 - 6-32 A DP "Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.

code34 - LED Floodlight 120W ,Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material,delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with . W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 90012008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Make:Philips/Havells/Wipro

code35 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.

code36 - LED Streetlight 90 W "Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598,LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB.Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned. Make: Philips/Havells/Wipro

code37 - Cable termination in DB and transformer / on the pole using suitable lugs, glands, PG clamps etc., including taping, neutral earthing using MS flat, guy wire etc., complete

code38 - Supplying and erection of Sub distribution contol panel with 1000x750x250mm size, distribution boards fabricated with MS sheet and powder coated canopy with double door and shall be mounted on suitable concrete foundation and necessary cable connections with required size glands, lugs, nuts and bolts etc with following items 100A, L&T, TPN switch - 1 no. 63A, Porcelain Kit Kat fuses - 8 no's Temperature controlled space heater - 1 no Pilot lamp indicators with glass window - 1 Set 11 W CFL - 1 no 15A SP switch and socket - 1 no. 100A capacity bus aluminium bus bar - 1 Set Make: L&T/ABB/Siemens

code39 - Supply and erection of Street light control board made up of 3mm thick sheet steel with fully weather proof double door design with top canopy for rain water protection etc., suitable for mounting out door on plinth. The control board comprises of the following items 63A, Triple pole MCB - 1 no Auto / manual switch - 1 no 32A, 3 pole contactor - 1 no Pilot lamp indicators - 1 set 24 hours timer - 1 no 11W CFL - 1 no Temperature controlled space heater - 1 no Make: L&T/ABB/Siemens

code40 - Supplying and erection of Main distribution control panel consisting of MCCB 630 Amps 4 Pole 1 no,SFU 400 Amps 3 nos Ammeter and Voltmeter with selector switch 1 set Fitted along with RYB indicators 400 Amps busbars with neat and heavy wiring in a fabricated powder coated Double Door Box with Canopy 16 and 18 gauge Box size 1800x1400x350 mm Provision for 15 Amps switch and socket and 9 watts LED lamp with holder and space heater 50x 50x 6 mm angle iron for mounting of panel and embedded in concrete and necessary cable connections with required size glands lugs nuts and bolts etc. complete. Make: L&T /ABB/Siemens