Karnataka Power Corporation Limited Tender

code04 - Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete up to 50mm conduit in brick wall.

code05 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.: of 2.5 sq mm. (Make:Sbeee/V-guard/Anchor/Finolex/ kei Havells/L&T.)

code06 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.: of 4 sq mm.(Make:Sbeee/V-guard/Anchor/Finolex/ kei Havells/L&T.)

code07 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.: of 6 sq mm. (Make:Sbeee/V-guard/Anchor/Finolex/ kei Havells/L&T.)

code08 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293: for 6A One Way Switch.(Make: Anchor/Legrand/Havells/GM modular.)

code09 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket. (Make: Anchor/Legrand/Havells/GM modular).

code10 - Supplying and fixing of modular switch &connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket (Make:Anchor/Legrand/Havells/GM modular).

code11 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall,6 Way (Make:Anchor/Legrand/Havells/GM modular.)

code12 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,8 Way (Make: Anchor/Legrand/Havells/GM modular.)

code13 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,10-12 Way (Make: Anchor/Legrand/Havells/GM modular.)

code14 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,18 Way (Make: Anchor/Legrand/Havells/GM modular.)

code15 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. :6 Module. (Make: Anchor/Legrand/Havells/GM modular.)

code16 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. :8 Module. (Make: Anchor/Legrand/Havells/GM modular.)

code17 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. :10 -12 Module. (Make: Anchor/Legrand/Havells/GM modular.)

code18 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.. :18 Module. (Make: Anchor/Legrand/Havells/GM modular.)

code19 - Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB ). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired completely.SP & N of 20amps . (Make: L&T/Legrend/ Schneider/ CGL / Havells/Anchor.)

code20 - Supplying of recess mounting non integral type 36 LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI greater than 70 percent . efficacy greater than 100 lumen per W,120degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should lesser than 5 percent of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20 percent, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturingdefect working under standard electrical condition. LED modular down light 2'x2' 36 W.(Make: CGL/Philips/Bajaj/Eveready)

code21 - Commercial recessed mounted LED Luminaire comprises of LED clusters, Driver and Motion Sensor. The Motion Sensor is integrated in the tile. This luminaire is suitable for 600 X 600 mm ceiling & recommended for modern offices,auditorium, assemble hall & other commercial interiors where sensor based On/Off function is required. Lights are turned ON as soon as motion is detected. Once the motion is seized, lights are turned off after a customized delay also called asStay On Time which is 15 minutes. MATERIAL SPECIFICATION1. Housing +Frame- CRCA, White powdercoated 2. Reflector panel-CRCA, White powder coated(HR).3. Diffuser- High translucentfrosted 4.internalWiring -PVC insulated Single-strand copperwire 5. Mains Terminal - 3 way 10 amps. ELECTRICAL PARAMETERS; Rated Voltage (V) Operating Voltage-240 Current - (A)- 0.140-0.165 wattage(W)-36W INSTALLATION mounting System - 4nos slots provided for suspension Cable entry -3 core cable mains terminal provided. Protection -IP-20 CCT -4000 ANSI Sensor type -Microwave mounting height -3 to 4 mts Detection Range - 5-7 mts. Warrenty period 2 years from the date of purchase PHILIPS/CGL/ BAJAJ

code22 - Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps.:On wall / ceiling / Rafter / Girders.

code23 - Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 phase / single door with powdercoated painting. Made out of 14 SWG MS enclosure. III - Double Door 4Way TP &N.

code24 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps SP.

code25 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63Amps TPN.

code26 - Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required class lA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure III - Double Door 12 Way TP & N

code27 - Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm copper strip.

code28 - Supplying heavy gauge GI conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. jindal/

code29 - Releasing of Existing fittings old wires switch boards (Temporary lighting arrangement upto finishing of work & releasing the same.

code30 - Supplying PVC/GI flexible conduit pipe 25mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely,

code31 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm.

code32 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade ,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mm2

code33 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1 sqmm (Green)