Karnataka Power Corporation Limited Tender

code04 - Supplying and fixing 63A HRC fuse link on existing switch fuse base with W loss as per IS-13703.

code05 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

code06 - Fabricating,supplying and erection of 8mtr long hot dip Galvanized Octagonal hot dip Pole with BSEN10025 gradeS355 JOsteel platef ors haft ,IS2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCB sas per IS specifications suitable to withstand the wind speed of 47m/s for 10m Pole in single section and single joint welded as per IS9595/IS10178AW Shaving dimensions bottom 175mm,top 70mm with 3mmthick, suitable base plate and 4Nos of 600mm long Jbolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as perASTM-A123 and153etc.,(excluding foundation) as per drawing appended.

code07 - Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4"" dia telescopic M. S. pipe, with 2"" dia1.5m long M.S.Bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories.Single bracket 2 m. Length

code08 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70percent, maximum light intensity should be between 60 degrees to 70 degrees., IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598,LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB.Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED eficiency 1301m/w, nominal CRI 75.Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned LED Streetlight 90 W

code09 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material,delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains,Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598,LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with . W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia.LED Floodlight 200W

code10 - Supply and erection of Street light control board made up of 3mm thick sheet steel with fully weather proof double door design with top canopy for rain water protection etc., suitable for mounting out door on plinth. The control board comprises of the following items 63A, Triple pole MCB - 1 no Auto / manual switch - 1 no 32A, 3 pole contactor - 1 no Pilot lamp indicators - 1 set 24 hours timer - 1 no 11W CFL - 1 no Temperature controlled space heater - 1 no Make: L&T/ABB/Siemens"

code11 - Fixinghalogen/metalhalide/SVL/IL/LEDfloodlightfittingoverexistingpole/wallceilingincludingclamps,bolts,nutsandwiringusing suitable capacity wires.

code12 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS-694:2010.3C x 2.5 mm2

code13 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)

code14 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.2.5 to 25 Sqmm

code15 - Supply and Making Heat shrinkable Straight Through Jointing Kits Suitable for 1.1kV Class 10Sqmm to 16Sqmm LT UG Cables"

code16 - Cable termination in DB and transformer / on the pole using suitable lugs, glands, PG clamps etc., including taping, neutral earthing using MS flat, guy wire etc.complete

code17 - Supply of RCC Hume Pipe 2000 mm long 200 mm Dia

code18 - Supply of Collars for RCC Hume Pipe 200 mm Dia

code19 - Supply of Cable Covering Tile 125x250x40 mm

code20 - Supply of Route & Joint indicating slab with MS Anchor rod

code21 - Covering cable with Tiles

code22 - Fixing of Route Joint Indicating Slab

code23 - Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed.In Hard Soil

code24 - Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr

code25 - Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete RCC Pipe

code26 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand)