Karnataka Power Corporation Limited Tender

004 - Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 Size: 4 core 10 sqmm Copper Cable Make:Polycab/Finolex/Havels/KEI/Anchor/Any standard

005 - Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/ stoneware pipe /on wall / on pole as required.In existing trench/duct. 2.5 sqmm to 25 sqmm ESCOMs SR 2023-24, Page No:52, Sl No.174, Item No.21.05

006 - Supplying and fixing of B class (medium duty) 50mm GI pipe of on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV ( ESCOMs SR 2023-24,Page No:38, Sl No:46, Item No:48.05)

007 - Wiring for lighting/power circuit using one of FRLS PVC insulated 6 sqmm, 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.:Polycab/Finolex/Havels/KEI/Any standard Size:6SQMM ( PWD Ele SR 2023-24,Page No:5, Sl No:2.3.5)

008 - Supplying and fixing of 2 Amps DP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.Make:ABB/L&T/Havells/Schenider/Siemens/Equivalent

009 - Supplying and fixing of 6 -32 Amps DP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.Make:ABB/L&T/Havells/Schenider/Siemens/Equivalent (PWD Ele SR 2023-24,Page No:17, Sl No:5.18.4)

010 - Supplying and fixing Microprocessor Based Astronomical(24Hr) timer Switch with using necessary bolts, nuts and washers. (PWD Ele SR 2023-24,Page No:21, Sl No:5.48)

011 - Supply and installation/fixing/ Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase/3phase energy meter in suitable base plate & having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility with timer and contactors Size 260mm X 210mm X 116mm (H-W-D) ( PWD Ele SR 2023-24,Page No:20, Sl No:5.43.2)

012 - Supply and installation/fixing/ Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase/3phase energy meter in suitable base plate & having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility with timer and contactors Size 300mm X 450mm X214mm (H-W-D) ( PWD Ele SR 2023-24,Page No:21, Sl No:5.44.2)

013 - Fabricating, supplying and erection of 4Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sec for 4Mtrs pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom 130mm dia, top 70 mm dia with 3mm thick, suitable base plate and 4Nos of 20mm long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.

014 - Fabricating, supplying and erection of 6Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sec for 6Mtrs pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom 130mm dia, top 70 mm dia with 3mm thick, suitable base plate and 4Nos of 20mm long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.

015 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1500mm Standard 40/50mm dia ( PWD Ele SR 2023-24,Page No:13, Sl No:4.6.5)

016 - Supply of 25Watt LED pole mounting type post top lantern with pressure die cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection molded polycarbonate/ clear glass material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70%, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency greater than 130 lm/w, nominal CRI greater than 75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source/Any equivalent. LED Post Top Lantern with 25 watts ( PWD Ele SR 2023-24,Page No:45, Sl No:11.7.2)

017 - Supply of 90Watt LED Streetlight luminaire with pressure die cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 90 W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight of 90 Watts ( PWD Ele SR 2023-24,Page No:46, Sl No:11.8.4)

018 - Supply of necessary fitting accessories like, Clamps, GI Flexible pipe, lugs, Glands, GI T, bend etc /any other items required to complete the work.

019 - Removing of existing HPMV/CFL fittings, cables, pipes and rerouting of existing GI pipes(If any) used for cable routing.

020 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m Common SR 2023-24, Vol-1,Page No.32, Sl No.1.6.1

021 - Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Common SR 2023-24, Vol-1,Page No.29, Sl No.1.4.1

022 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, formwork, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Common SR 2023-24, Vol-1,Page No.15, Sl No.2.2.1.

023 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Common SR 2023-24, Vol-2,Page No.83, Sl No.11.16.3