Karnataka Power Corporation Limited Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 52,200Document Cost
Refer DocumentsTender Fee
₹ 660
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
KPCL/2024-25/PS/WORK_INDENT2265Tender No
KPCL/2024-25/PS/WORK_INDENT2265Tender Authority
Karnataka Power Corporation Limited ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
code04 - Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring stripthickness and resistivity as per IS-3975 :185 Sqmm, 3.5 Core, (28 GI Strips - 4 x 0.8 mm. make havells/ kei/sbee/nicco/unistar
1000
998
998000
code05 - Labour charges for laying of 1.1KV class UG cable in existing trench GI pipe ;/ stoneware pipe/ on wall/ on pole as required In existing trench / duct.185sq mm to 240sqmm.
1000
37
37000
code06 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.
12
343
4116
code07 - Supplying & fixing of 1.1kv Double compression glands 75mm size Suitable Size of 3.5x185 sqmm
4
520
2082
code08 - Termination of 150 to 185 sqmm LT cables at both ends with necessary glanding etc., complete
4
737
2948
code09 - Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975- 3.5 core 35 sqmm Make: havells/ kei/sbee/nicco/unistar
250
236
59000
code10 - Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 25 sqmm to 75 sqmm
250
16
4000
code11 - Digging of trench of 0.6m deep*0.50 Mtr wide refilling the trench to the required ground level and consolidating etc., complete In soil (ordinary)
450
80
36000
code12 - Digging of trench of 0.6m deep*0.50 Mtr wide refilling the trench to the required ground level and consolidating etc., complete In soil (Hard)
50
107
5350
code13 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete In c:c cutting
24
215
5160
code14 - Supply & laying of Burnt Bricks:
5000
13
65000
code15 - Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.
250
105
26250
code16 - Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 100mm
24
935
22440
code17 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm
84
374
31416
code18 - Termination of LT cables with necessary glands etc., complete.,16 to 35 sqmm cable gland
12
246
2952
code19 - Supply & fixing of Manual Changeover in Sheet Steel Enclosure Change over switch 160Amps Cat No CO21600OSOO Make L&T
1
16947
16947
code20 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia
3
3149
9447
code21 - Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets. 200 mm x 200 mm x 98 mm
6
2174
13044
code22 - Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only).63 mm dia. Suitable for 3.5x35/50sqmm cable
12
407
4884
code23 - Supplying tinned copper lugs and crimping and wiring to 35 sqmm Long Barrel terminal point for wire of the following sizes.
48
34
1632
code24 - Supplying of Corrugated Galvanized sheets for Roofing including vertical /curved surface.
10
1365
13650
code25 - Fabrication and fixing of Galvanized Sheets fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge
1
735
735
code26 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. MLDB & ELDB Painting From Unit 1 to 8 Approxmetely 175 Nos
500
94
47250
code27 - Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
800
3
2400
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%