Karnataka Neeravari Nigam Limited Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 1,69,000Document Cost
Refer DocumentsTender Fee
₹ 2,500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
KNNL/2024-25/BD/WORK_INDENT1389Bid Award Id
ViewTender No
KNNL/2024-25/BD/WORK_INDENT1389Tender Authority
Karnataka Neeravari Nigam Limited ViewPurchaser Address
-Website
http://http://knnlindia.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Others - MDP Royalty
Others - debarment circular
Others - verification of CA document
BOQ Items
code04 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all aterials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for column footing 8% formwork on finished rate.complete as per direction of Engineer incharge
25.49
7185
183149.4735
code05 - For footing 8% form work I.No.4 complete as per direction of Engineer incharge
25.49
574
14651.9069
code06 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for column 70% form work on finished rate complete as per direction of Engineer incharge
17.52
6804
119206.08
code07 - For column 70% formwork I.No.6 complete as per direction of Engineer incharge
17.52
4762
83444.256
code08 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.complete as per direction of Engineer incharge
89.2
279
24913.56
code09 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, returnwalls, retaining walls, sunken floors etc.The ranite/trap/basalt crushed graded coarse aggregates and fine Agregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for beam 60% formwork on finished rate.complete as per direction of Engineer incharge
23.63
7185
169785.0945
code10 - For beam 60% formwork I.No.9 complete as per direction of Engineer incharge
23.63
4311
101871.0567
code11 - Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications complete as per direction of Engineer incharge
7.05
93929
662205.4425
code12 - Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.complete as per direction of Engineer incharge
72.45
8376
606906.405
code13 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.complete as per direction of Engineer incharge
630
371
234171
code14 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.complete as per direction of Engineer incharge
630
297
187204.5
code15 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor orthe side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage chargesof machinery complete as per specifications and as per directions of the Engineer-in-Charge.complete as per direction of Engineer incharge
218.4
593
129565.8
code16 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.complete as per direction of Engineer incharge
630
93
58873.5
code17 - Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.complete as per direction of Engineer incharge
1011.78
103
105174.531
code18 - Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet tobe inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mmthick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever equired. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per
specifications, drawings and as directed by Engineer-in-Charge.complete as per direction of Engineer incharge
271.8
1777
483165.27
code19 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.complete as per direction of Engineer incharge
24.6
2994
73667.16
code20 - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge (WMM/WBM Base to be paid separately if necessary as per relevant technical specification.complete as per direction of Engineer incharge
330
1121
370062
code21 - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead Lime Concrete, cement concrete grade M-10 and below (2.7.A)"complete as per direction of Engineer incharge
132.83
824
109485.1275
code22 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and ommissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: I.No.1.7 PVC pipes 110mm dia., 6 kg/sqcm & class 3 complete as per direction of Engineer incharge
120
431
51786
code23 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:I.No.1.1PVC pipes 25mm dia, 10 kg/sqcm & class 5complete as per direction of Engineer incharge
80
50
4032
code24 - 15 mm C.P.brass tapcomplete as per direction of Engineer incharge
10
472
4725
code25 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :I.No.14.2.1 W.C. pan with ISI marked white solid plastic seat and lid complete as per direction of Engineer incharge
6
5079
30479.4
code26 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: I.No.14.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap mm C.P. brass pillar taps.complete as per direction of Engineer incharge
4
2689
10756.2
code27 - Providing and fixing kitchen sink including making all connections including cost of fittings with White glazed fire clay sink of size 600x450x250 mmcomplete as per direction of Engineer incharge
1
2063
2063.25
code28 - Providing and fixing M.S. Tubular frames for doors, windows,ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and rinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.complete as per direction of Engineer incharge
378
134
50803.2
code29 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost oflabour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m complete as per direction of Engineer incharge
29.98
99
2990.505
code30 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. 2.1.2 Mix 1:4:8 (M 7.5) Using 40 mm nominal size graded crushed coarse aggregates complete as per direction of Engineer incharge
18.37
5947
109250.064
code31 - Providing and laying in position Reinforced cement concrete for all Superstructures of building , Road works, Water works, Irrigation works & superstructure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS odes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.I.No.2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement, dowel bars & formwork to be paid separately) complete as per direction of Engineer incharge
11.09
6961
77203.035
code32 - formwork 8% for footing and Drop wall I.No.31 complete as per direction of Engineer incharge
11.09
556
6176.2428
code33 - Providing and laying in position Reinforced cement concrete for all Superstructures of building , Road works, Water works, Irrigation works & superstructure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS odes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.I.No.2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement, dowel bars & formwork to be paid separately) complete as per direction of Engineer incharge
2.36
6961
16429.14
code34 - Form workfor column 70% I.No.33
2.36
4873
11500.398
code35 - Providing and laying in position Reinforced cement concrete for all Superstructures of building , Road works, Water works, Irrigation works & superstructure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS odes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.I.No.2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement, dowel bars & formwork to be paid separately) complete as per direction of Engineer incharge
2.54
6961
17682.21
code36 - Formwork for Plinth beam, 50% I.No.35
2.54
3480
8841.105
code37 - Formwork for Roof beam, 60% I.No.35
2.71
4176
11319.399
code38 - Providing and laying in position Reinforced cement concrete for all Superstructures of building , Road works, Water works, Irrigation works & superstructure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS odes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.I.No.2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement, dowel bars & formwork to be paid separately) complete as per direction of Engineer incharge
3.61
6961
25131.015
code39 - Form work for Roof Slab and Roof slab projection 50% I.No.38
3.61
3480
12565.5075
code40 - Providing and filling murrum/ Gravel soil (CNS soil) for foundation or around pipes inluding cost of all materials, labour, spreading soil in layers of 100 to 150mm braking clods watering compaction by earth masters to achieve density control of not less than 90% etc.complete with all lead and lifts. complete as per direction of Engineer incharge
10.63
861
9152.43
code41 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.complete as per direction of Engineer incharge
22.23
8376
186218.487
code42 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications.I.No.2.1.4 Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork shall be paid separately)complete as per direction of Engineer incharge
0.51
6527
3329.2035
code43 - Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure /Superstructure complete as per Drawing and Technical Specifications. complete as per direction of Engineer incharge
3.67
93929
344722.5495
code44 - Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per pecifications.complete as per direction of Engineer incharge
0.72
130412
93896.712
code45 - Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) complete as per direction of Engineer incharge
21.24
7816
166016.088
code46 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications..complete as per direction of Engineer incharge
7
1066
7467.6
code47 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to re quired shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials,labour,usage charges of machinery complete as per specifications.11.35.1.1complete as per direction of Engineer incharge
4.05
474
1922.13
code48 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with pproved steel primer all complete. Fixed to steel windows by welding item no -11.34A complete as per direction of Engineer incharge
85.05
176
15002.82
code49 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. complete as per direction of Engineer incharge
194.05
267
51956.8875
code50 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. complete as per direction of Engineer incharge
194.05
105
20375.25
code51 - Providing 18 mm cement plaster in two coats under layer 12 mm thickcement plaster with cement mortar 1:5 (1 cement : 5 coarse sand)finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. complete as per direction of Engineer incharge
168.72
389
65724.876
code52 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (vol 2 pg No.45 I.No.8.25 P.W.D. C.SR 2023-24)
263.18
143
37858.443
code53 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge complete as per direction of Engineer incharge
168.72
93
15766.884
code54 - Applying priming coat: With ready mixed pink or Grey primer of approved rand and manufacture on wood work (hard and soft wood) including reparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. complete as per direction of Engineer incharge
21.24
55
1182.006
code55 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. complete as per direction of Engineer incharge
21.24
120
2564.73
code56 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of ngineer-in-charge complete as per direction of Engineer incharge
4.05
145
591.0975
code57 - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.I.No. 9.12.2 Size of Tile 600x600 mmcomplete as per direction of Engineer incharge
89.56
1202
107673.51
code58 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and ommissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: I.No.1.7 PVC pipes 110mm dia., 6 kg/sqcm & class 3complete as per direction of Engineer incharge
120
431
51786
code59 - Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. 125x65x2.12mm complete as per direction of Engineer incharge
21
57
1212.75
code60 - Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. complete as per direction of Engineer incharge
7
1104
7732.2
code61 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor orthe side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage chargesof machinery complete as per specifications and as per directions of the Engineer-in-Charge.(complete as per direction of Engineer incharge
231.92
593
137586.54
code62 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent complete as per direction of Engineer incharge
25.2
2994
75463.92
code63 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.complete as per direction of Engineer incharge
50.76
145
7408.422
code64 - Painting with synthetic enamel paint of pproved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. complete as per direction of Engineer incharge
63.72
120
7694.19
code65 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the urface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. complete as per direction of Engineer incharge
253.37
93
23677.4265
code66 - Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification complete as per direction of Engineer incharge
198.8
3787
752925.18
code67 - 15 mm C.P.brass tap complete as per direction of Engineer incharge
10
472
4725
code68 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :I.No.14.2.1 W.C. pan with ISI marked white solid plastic seat and lid (complete as per direction of Engineer incharge
5
5079
25399.5
code69 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: I.No.14.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap mm C.P. brass pillar taps complete as per direction of Engineer incharge
5
2689
13445.25
code70 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : I.No.13.4.1 for 25 mm nominal bore complete as per direction of Engineer incharge
3
576
1729.35
code71 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
121.91
270
32952.273
code72 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. complete as per direction of Engineer incharge
275.1
106
29160.6
code73 - Providing and fixing in position fully glazed for windows shutters with Honne wood stiles and rails of 35mm. thick 75mm wide in single shutters with 4mm thick plain glass fixed with wooden beading including cost of materials, labour charges, usage charges complete as per specifications. complete as per direction of Engineer incharge
29.16
5815
169570.0656
code74 - Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. complete as per direction of Engineer incharge
4.32
7890
34087.5648
code75 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. complete as per direction of Engineer incharge
1
1076
1076.96
code76 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
50.76
147
7478.9784
code77 - Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
4.32
56
242.6976
code78 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
55.08
121
6714.252
code79 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
275.1
145
39950.022
code80 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
510.23
94
48135.0982
code81 - Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification complete as per direction of Engineer incharge
201.02
3823
768583.8884
code82 - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary.19/20mm dia 2mm thickGround floor complete as per direction of Engineer incharge
150
66
9900
code83 - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary.19/20mm dia 2mm thickFirstt floor complete as per direction of Engineer incharge
150
66
9900
code84 - Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick(1.2.2) Ground floor
100
78
7800
code85 - Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary25mm dia 2mm thick(1.2.2)Firstt floor complete as per direction of Engineer incharge
100
78
7800
code86 - Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.1.3.1-19/20mm dia 2mm thickGround floor
50
68
3400
code87 - Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.1.3.1-19/20mm dia 2mm thickFirstt floor
50
68
3400
code88 - Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.1.3.2-19/20mm dia 2mm thick1.3.1 25mm dia 2mm thickGround floor
75
79
5925
code89 - Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.1.3.2-19/20mm dia 2mm thick1.3.1 25mm dia 2mm thickFirstt floor
75
79
5925
code90 - Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely-20mmGround floor
10
19
190
code91 - Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely-20mmFirstt floor
10
19
190
code92 - supplying And Fixing Metal Fan Box with Round Hook either end of the pipe terminated completelyGround floor
5
160
800
code93 - supplying And Fixing Metal Fan Box with Round Hook either end of the pipe terminated completelyFirstt floor
5
160
800
code94 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.2.2.1 short point upto 3m from Tapping point to outlet via switch box. Ground floor
10
269
2690
code95 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.2.2.1 short point upto 3m from Tapping point to outlet via switch box. Firstt floor
10
269
2690
code96 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires s hall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.2.2.2 Medium point above 3m upto 6m from Tapping point to outlet via switch box.Ground floor
10
379
3790
code97 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.2.2.2 Medium point above 3m upto 6m from Tapping point to outlet via switch box.Firstt floor
10
379
3790
code98 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6m upto 10m from Tapping point to outlet via switch box.Ground floor
5
555
2775
code99 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6m upto 10m from Tapping point to outlet via switch box.Firstt floor
5
555
2775
code100 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5mm2Ground floor
300
42
12600
code101 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5mm2Firstt floor
300
42
12600
code102 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4mm2Ground floor
50
63
3150
code103 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4mm2Firstt floor
100
63
6300
code104 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6mm2Ground floor
50
92
4600
code105 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6mm2Firstt floor
50
92
4600
code106 - Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4mm2 Ground floor
100
245
24500
code107 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way Ground floor
2
159
318
code108 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3WayFirstt floor
2
159
318
code109 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6WayGround floor
3
220
660
code110 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6WayGFirstt floor
3
220
660
code111 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8wayGround floor
3
261
783
code112 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8wayFirstt floor
3
261
783
code113 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12wayGround floor
1
319
319
code114 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12way Firstt floor
1
319
319
code115 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16-18way Ground floor
1
339
339
code116 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16-18way Firstt floor
1
339
339
code117 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 ModuleGround floor
2
137
274
code118 - upplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 ModuleFirstt floor
2
137
274
code119 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.6 ModuleGround floor
2
234
468
code120 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.6 ModuleFirstt floor
2
234
468
code121 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Ground floor
2
284
568
code122 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Firstt floor
2
284
568
code123 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socketGround floor
10
236
2360
code124 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socketFirstt floor
3
236
708
code125 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TV/Telephone socketGround floor
4
156
624
code126 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TV/Telephone socket First floor
6
156
936
code127 - Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc , and fixing on existing wooden or metal box using N.F. screws. Ground floor
200
-
82
code128 - Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc , and fixing on existing wooden or metal box using N.F. screws.Firstt floor
200
-
82
code129 - Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 80mmGround floor
25
15
375
code130 - Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 80mmFirstt floor
30
15
450
code131 - Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws 110mmGround floor
5
21
105
code132 - Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws 110mmFirstt floor
10
21
210
code133 - Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 230/440 volts 1/3 phase motor upto 5 HP.Ground floor
1
1927
1927
code134 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 16AmpsGround floor
1
157
157
code135 - Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
4
492
1968
code136 - Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary complete as per direction of Engineer incharge
40
66
2640
code137 - Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary complete as per direction of Engineer incharge b) 25mm dia 2mm thick
10
78
780
code138 - Open Conduit System:Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. complete as per direction of Engineer incharge a) 19/20mm dia 2mm thick
10
69
690
code139 - Open Conduit System:Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. complete as per direction of Engineer incharge b) 25mm dia 2mm thick
10
81
810
code140 - Supplying and fixing PVC/metal conduit Deep junction box a) 19/20mm deep junction box as directed by Engineer incharge
10
49
490
code141 - Supplying and fixing VC/metal conduit Deep junction box b) 25mm deep junction box as directed by engineer incharge of work
10
56
560
code142 - Supplying and fixing VC/metal conduit Deep junction box 32mm deep junction box as directed by engineer incharge of work
10
61
610
code143 - Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.. complete as per direction of Engineer incharge a) 12"x12"x3"(300x300x76)
4
120
480
code144 - Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.. complete as per direction of Engineer incharge b) 12"x9"x3"(300x228x76)
4
115
460
code145 - Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.. complete as per direction of Engineer incharge )c) 10"x7"x3"(254x178x76)
4
112
448
code146 - Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. d) 8"x6"x3"(203x152x76) as directed by engineer incharge
4
86
344
code147 - Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.. complete as per direction of Engineer incharge e) 4"x4"x3"(101x101x76)
4
74
296
code148 - Extra for Groove cutting in brick wall/CC floor to the suitabledepth for concealing of Conduit/GI pipe and plastering,finishing upto wall surface complete.(vol VI Page no.2 Item no.1.7.1 of SR of PWD(Electrical) for the year 2023-24)a)upto 50mm conduit in brick wall
8
29
232
code149 - Pointing wiring using copper wire with switch:Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. complete as per direction of Engineer incharge a) Short point upto 3mtr from tapping point to out let via switch
2
285
570
code150 - Pointing wiring using copper wire with switch:Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b)Medium point above 3mtr fupto 6mtr from tapping point to outlet via switch as directed by engineer incharge
2
394
788
code151 - Pointing wiring using copper wire with switch:Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. complete as per direction of Engineer incharge c)Long point above 6mtr upto 10mtr from tapping point to outlet via switch
2
570
1140
code152 - Pointing wiring using copper wire with switch:Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. d) Two outlet in a row above 3mtr upto 6mtr from tapping point to outlet via switch as directed by engineer incharge
2
708
1416
code153 - Pointing wiring using copper wire with switch:Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. complete as per direction of Engineer incharge e)Three outlet in a row above 6mtr upto 10mtr from tapping point to outlet via switches
2
1035
2070
code154 - Supplying 6A flush type socket and 6 A flush type SP switcheither surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654, 6A 2 Way complete as per direction of Engineer incharge
4
128
512
code155 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch complete as per direction of Engineer incharge
4
326
1304
code156 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.3.6.10)6/16A Universal Socket
4
236
944
code157 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. I.No.3.6.4 Stepped Fan Regulator Two Module complete as per direction of Engineer incharge
8
357
2856
code158 - Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm complete as per direction of Engineer incharge
10
63
630
code159 - Wiring for lighting power circuit using one of FRLS PVC insulated 1100 V grade multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments d 10 sqmm
10
167
1670
code160 - Supplying 4mm thcik plastic sheet with necessary nitches of fixing switches regulators etc and fixing on existing wooden or metal box using N.F.screws complete as per direction of Engineer incharge
350
-
143.5
code161 - Supplying PVC/GI flexible conduit pipe .... mm dia fixing onsurface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely a)20mm complete as per direction of Engineer incharge
10
19
190
code162 - Supplying PVC/GI flexible conduit pipe .... mm dia fixing onsurface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completelyb) 25mm
10
22
220
code163 - Supplying PVC/GI flexible conduit pipe .... mm dia fixing onsurface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completelyb) 50mm
10
47
470
code164 - Supplying and fixing of slim box fitting, made out of CRCASheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube.I.no.11.14.1 1 x 2' Tube light fitting. complete as per direction of Engineer incharge
10
248
2480
code165 - Fixing of . A TPST / change over switch / Contactor alongwith neutral link with screws, bolts, nuts and wiring usingrequired capacity wires and circuit labelling.15A to 63A TPST ( a)15A to63A TPST(28/16) as directed by engineer incharge
10
278
2780
code166 - supplying of TPST with rewirable porelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approaved colour 32A complete as per direction of Engineer incharge a) 32Amps
4
1701
6804
code167 - Supplying and fixing of Porecelain fuse channel with cut out on existing wooden/panel using necessary nuts,bolts and washers 32 A complete as per direction of Engineer incharge a) 32 Amps
10
241
2410
code168 - Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. ( complete as per direction of Engineer incharge . a)5-32 Amps SP
10
415
4150
code169 - Supplying and fixing of LED type panel board indicatinglamp with required colour suitable for 230/440VAC. 50 Hz12/24V D.C. complete as per direction of Engineer incharge
5
515
2575
code170 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.40x40x6mm
10
305
3050
code171 - Fabricating supplying and mounting MS box made out...... SWG suitable for floor/wall mounting.fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be fininshed with 2 coats of red oxide primer paint and finally finishied with approved colour enameled metal paint etc., complete. complete as per direction of Engineer incharge a) 14SWG
350
-
175
code172 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polycarbonate material, deliveringsuperior light output Rated life Burning Hrs 50000 hr @Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K IP66 optical and electrical compartment & impact resistance of complete luminaire IK08 Power Factor greater 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322 IEC 60598 LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Powerconsumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75.Luminaire manufacturer should have in-house facility accredited by NABL CPRI any Government certifiedagency & Design & Development facility certified by ISO 9001 2008 Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing def. complete as per direction of Engineer in charge LED Streetlight 25 Wand
30
2425
72750
code173 - Fixing a ceiling /wall mounting fan of all capacities and all types to existing with necessary clamps and 'S' hook made out of 15 mm dia MS rod, with 5 amps, celling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on suitable size wooden board and wired. ( complete as per direction of Engineer incharge
8
315
2520
code174 - Supplying capacitor type ceiling fan complete with down rod blade,shakle,regulator canopies etc.,for operation on 230 volts,50 cycles,single phase AC supply confirming to ISS-374-1979 and with double ball bearing system 1) 48" sweep(1200mm) a) regular model complete as per direction of Engineer incharge
8
2984
23872
code175 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.10-12 Module Ground floor
2
344
688
code176 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.10-12 Module Firstt floor
2
344
688
code177 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.16-18 ModuleGround floor
4
457
1828
code178 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.16-18 ModuleFirstt floor
4
457
1828
code179 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way SwitchGround floor
8
102
816
code180 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way SwitchFirstt floor
8
102
816
code181 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12936Amps Two way SwitchGround floor
6
166
996
code182 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12936Amps Two way SwitchFirstt floor
6
166
996
code183 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12936Amps 3way socket (Ground floor
4
171
684
code184 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12936Amps 3way socket (Firstt floor
4
171
684
code185 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293Stepped Fan Regulator.(Ground floor
4
357
1428
code186 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293Stepped Fan Regulator.(Firstt floor
4
357
1428
code187 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switchGround floor
4
180
720
code188 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switchFirstt floor
4
180
720
code189 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps Bell pushGround floor
3
177
531
code190 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps Bell pushFirstt floor
3
177
531
code191 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32Amps DP switchGround floor
4
326
1304
code192 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32Amps DP switchFirstt floor
4
326
1304
code193 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32AmpsGround floor
5
241
1205
code194 - Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 100Amps Ground floor
2
7090
14180
code195 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.60 to 70AmpsGround floor
1
5950
5950
code196 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (Icu=lcs)100Amps 25kA Ground floor
3
6086
18258
code197 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32Amps SP Ground floor
2
415
830
code198 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32Amps SP Firstt floor
2
415
830
code199 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-40 Amps SP Ground floor
2
793
1586
code200 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-40 Amps SP First floor
2
793
1586
code201 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-50-63Amps TPN Ground floor
4
3088
12352
code202 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-50-63Amps TPN Firstt floor
4
3088
12352
code203 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II -Double Door 12Way SP &N Ground floor
5
1863
9315
code204 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II -Double Door 12Way SP &N Firstt floor
5
1863
9315
code205 - upplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Ground floor
5
9255
46275
code206 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. Ground floor
5
5705
28525
code207 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.CGround floor
4
515
2060
code208 - Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.100Amps 4x30x6mm Aluminium Strips Ground floor
6
2465
14790
code209 - supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.40x40x6mmGround floor
20
305
6100
code210 - Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., completeGround floor
1000
-
500
code211 - Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia..pg no-17 ( complete as per direction of Engineer incharge
5
3510
17550
code212 - Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300mm)Ground floor
8
2969
23752
code213 - Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300mm)Firstt floor
8
2969
23752
code214 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200mm) Regular model Firstt floor
12
2984
35808
code215 - Supplying and drawing Flexible Multicore Cable manufactured
with electrolytic grade flexible copper with low conductor
confirming to IS 8130-1984 and (Virgin) PVC insulation
sheathed suitable for working voltage upto 1100V as per IS-
694:2010.2C X 1.5 mm2Ground floor
120
53
6360
code216 - Supplying of recess mounting non integral type LED luminaries comprising of pressure recast /extruded aluminum housing, with spring loaded false ceiling clA,Power LEDs with CCT 6500 degree K, CRI greater than 70 percent efficacy greater than 100 lumen per W,120 degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/I E C 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diff user which enhances the lighting level LED s are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THE less than 20%, Life as per L M 79. He operating input voltage should be between 130 to 275 V. BISA approved and Tested by N A B L/C P R I accredited laboratory with 2 years Warranty against any manufacturing 11.6.1 LED modular down light 1x1 34- 22 W Ground floor
5
3692
18460
code217 - Supplying of recess mounting non integral type LED luminaries comprising of pressure recast /extruded aluminum housing, with spring loaded false ceiling clA,Power LEDs with CCT 6500 degree K, CRI greater than 70 percent efficacy greater than 100 lumen per W,120 degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/I E C 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diff user which enhances the lighting level LED s are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THE less than 20%, Life as per L M 79. He operating input voltage should be between 130 to 275 V. BISA approved and Tested by N A B L/C P R I accredited laboratory with 2 years Warranty against any manufacturing 11.6.1 LED modular down light 1x1 34- 22 W First floor
4
3692
14768
code218 - Supplying of recess mounting non integral type ........ LED aluminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 100 lumen per watt, 120degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 2'x2' /1'x4' 34-36 W Ground floor
1
5898
5898
code219 - Supplying of recess mounting non integral type ........ LED aluminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 100 lumen per watt, 120degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 2'x2' /1'x4' 34-36 W First floor
1
5898
5898
code220 - Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI greater than 70%. Efficacy greater than 100 lumen per watt, 120 degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' /1' X 4' 34 -36watt.LED modular down light 2'x2' /1'x4' 34-36 W. complete as per direction of Engineer incharge
1
5898
5898
code221 - Supplying & fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K,CRI greater than 70%.efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80.The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts.BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.15W, 6500K complete as per direction of Engineer incharge
5
326
1630
code222 - Supplying & Fixing of Open Type Heavy Duty FerromagneticCopper Ballast for HPSV/HPMH lA Supply of High Intensity Discharge Electro Magnetic Ballast suitable for Wsodium vapour / Metal Halide lamp with Copper winding of Orthocyclic winding coil. Class H insulated dual coatedcopper wire. Compliance to IEC 61347-2-9 Safety &IEC60923 Performance. Winding Temperature for HID Ballasttw equal to 130 deg C & temperature rise equal to 70 deg C. Operating voltage range from 180V to 265V, 50Hz AC power Supply12.46 .Supplying & Fixing of 70-150 Watts lamp holder 2 Pin complete as per direction of Engineer incharge
15
63
945
code223 - Supplying and Fixing of........mm dia class A GI pipe bracket up to 2 Mtrs long bent at suitable angle and fixing to this bracket 1x40/2x40 watts fluorescent tube street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires.Using 25mm dia G.I.Pipe complete as per direction of Engineer incharge
2
978
1956
code224 - Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders complete as per direction of Engineer incharge
25
122
3050
code225 - Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. complete as per direction of Engineer incharge
20
171
3420
code226 - Extra length of GI pipe of class B 19mm dia for down rod. complete as per direction of Engineer incharge
10
197
1970
code227 - Fixing one exhaust fan after making a suitable notch in the
wall and finishing with cement mortar and colouring to match
the existing wall or brackets, with bolts and nuts and a 5 A,
ceiling rose with sufficient length of 23 / 0.0076 inch PVC
insulated twin core wire of approved make with wire mesh
and wooden frame. pg no-46 It no-13.13 complete as per direction of Engineer incharge
6
707
4242
code228 - Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. complete as per direction of Engineer incharge
10
492
4920
code59 - Hold fasts complete as per direction of Engineer incharge of work
28
52
1470
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements