Karnataka Neeravari Nigam Limited Tender

PWD SR 2023-2 P.No. 16 I.No:2.4.3 Vol-1 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lifts and as directed by the Engineer-in-charge of the work

PWD SR 2023-24 P.No. 11 I.No:2.11H Vol-1 - Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures complete with all lead and lifts and as directed by the Engineer in charge of the work

PWD Ele. SR 2023-24 P.No. 13 I.No:4.5. - Fabrication,Supplying,Erection,Testing and Commissioning of.ms long Polygon high mast with Single/Multipletelescopic sections having, (minimum overlap distance of 1.5 times of topsection) thickness as per BSEN 10025 grades 355 JO/ASTMA572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47m/s as per IS875 part3 (as per GA Drawing). Baseplate as per IS 2062/ASTMA 572-50. The mast shall be Galvanize dinsingle Hot dipasper BSENIS O1461/ASTMA 123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with diecast LM-6 pulleys,stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5mm dia, stainless steel wire rope of AISI304 grade 7/19-core, (Factor of Safety as per TRno-7).2.5mm 2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have anual/power tool (Suitable reversible geared motor operating on 230/415V, 50Hz, shall be provide above 15Mtr mast) The mast shall have lanternof 2 segments, suitable dia with max load carrying capacity as per IS1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin lA fitting with wiring (excluding foundation) as per technical data. 16 m - Top 150 mm and Bottom 410 mm dia complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No. 20 I.No:5.42.2 - Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No. 20 I.No:5.41.2 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No. 5 &6 I.No:2.3.6 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 2.50 mm2 complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24P.No. 5 &6 I.No:2.3.6 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 10 mm2 complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.46 I.No:11.9. - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 77 per, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage Overload, short circuit miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322 IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree Nichia Lumileds Osram make LED Source. LED Floodlight 200W complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.56 I.No:13.5 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.17 I.No:5.18 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (A) 6-32 A SP complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.17 I.No:5.18 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 (B) 50-63 A SP complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.19 I.No:5.35 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.14 I.No:5.7.3 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63 A complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

ESCOM SR 2023-24 P.No.13 Sl.No.:201 I.No:32.05 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.16 I.No:5.14.3 - Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 Acomplete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.21 I.No:5.48 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

ESCOM SR 2023-24 P.No.14Sl.No.:235 I.No:34.07 - Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 50 Sqmm, 4 Core complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

ESCOM SR 2023-24 P.No.63 I.No:29.02 - Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. In Ordinary Soil complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

ESCOM SR 2023-24 P.No.63 I.No:29.07 - Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtrcomplete with all lead and lifts and as directed by the Engineer-in-charge of the work.

ESCOM SR 2023-24 P.No.05 Sl.No:61 I.No:8.02 - Guy Wire & GI Wire as per IS-21418 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM complete with all lead and lifts and as directed by the Engineer-in-charge of the work

PWD Ele. SR 2023-24 P.No.54 I.No:12.57 - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.56 I.No:13.2.3 - Supplying and Fixing.mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole,using suitable clamps, bolts, nuts and wiring using suitable capacity wires Using 40mm dia G.I.Pipe complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD SR 2023-24 P.No.83 I.No:11.16.3 - roviding and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.45 I.No:11.7 - Supply of LED pole mounting type post top lantern with pressure die casta luminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light outputRated life Burning Hrs 50000 hr@ Lumen aintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor0.9 with mains, Surge Protection- Min 5KV along with Over voltage Overload, short circuit miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50 60Hz application. Compliance to IS 10322 1 EC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency 1301m w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL CPRI & any Government certified agency & Design & Development facility certified by ISO 9001 2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree Nichia umileds Osram make LED Source.LED post top lantern with 25/30W complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.45 I.No:11.7 - Supply of LED pole mounting type post top lantern with pressure die casta luminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material, delivering superior light outputRated life Burning Hrs 50000 hr@ Lumen aintenance of 70per, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage Overload, short circuit miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50-60Hz application. Compliance to IS 10322 1 EC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency 1301m w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree Nichiavumileds Osram make LED Source LED post top lantern with 45 W complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.56 I.No:13.6 - Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires. complete with all lead and lifts and as directed by the Engineer-in-charge of the work.

PWD Ele. SR 2023-24 P.No.45 I.No:11.8.2 - Supply of LED Street light luminaire with pressure diecast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glareclear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 per, maximum light intensity should be between 60 degrees to 70degrees. CCT 5500K,IP66 optical and electrical compartment & impact resistance of complet eluminaire IK08. Power Factor 0.9withmains, Surge Protection-Min 5KV along with Over voltage Over load, short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40 mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50-60Hz application. Compliance to IS 10322 IEC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with.W System Power consumption. LED Efficiency 1301m w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL CPRI any Government certified agency & Design Development facility certified by ISO 9001:2008. Housing with supplier word mark name shall be Engraved Embossing on the diecast housing Bodypart. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufactrer & Cree Nichia Lumileds Osram make LED Source LED Streetlight 40W complete with all lead and lifts and as directed by the Engineer-in-charge of the work