Karnataka Neeravari Nigam Limited Tender

004 - Wiring for lighting / power circuit using one of FRLS PVC insulated 1100Vgrade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS -694: confiring to latest amendments. 1mm²

005 - Wiring for lighting power circuit using one of F R L S PVC insulated 1100 V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments 1.5 mm².

006 - Wiring for lighting power circuit using one of F R L S PVC insulated 1100 V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694: confirming to latest amendments. 2.5 mm²

007 - Wiring for lighting power circuit using one of F R L S PVC insulated 1100 V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694: confirming to latest amendments. 4 mm²

008 - Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps bolts, nuts etc., with provision for fixing suitable type capacity MCB’s single phase/ 3 Phase /single door with powder coated painting. Made out of 14SWG MS enclosure

009 - Supply and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293

010 - 6A Three way socket

011 - Supply and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 600 W Dimmer

012 - 16A one way switch

013 - 6A bell push

014 - 32 amps DP switch

015 - 6/16 A universal socket

016 - Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plate with due groove cutting in brick wall including necessary raw plugs machine NF screwed etc complete 8 way cc

017 - Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box 8 module

018 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.48" Sweep (1200mm) Regular model

019 - Supplying wall mounting fan suitable to operate at single phase 230v A.C. supply. 400mm sweep

020 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuse with Injection molded poly carbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70 maximum light intensity should be between 60 degrees to 70 degrees. C C T 5500 K IP 66 optical and electrical compartment and impact resistance of complete luminary IKE. Power Factor 0.9 with mains, Surge Protection Min 5 K V along with Over voltage Overload, short circuit/ miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 5060Hz application. Compliance to IS 10322I EC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED efficiency 1301 m/w, nominal CIR 75. Luminary manufacturer should have in-house facility accredited by NABL CPRI any Government certified agency Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer Cree Nichiren Illumines Os ram make LED Source.

021 - Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per specifications.

022 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge

023 - Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.

024 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.0.63 mm thick with zinc coating not less than 275 g/ m²

025 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.