Karnataka Neeravari Nigam Limited Tender

004 - 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Deduct 5 percent per cum if rollers are not used and tamping is done manually.(Vol 1, PWD SR -2023-24,page no-34,Item no -1.8 )

005 - Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates making holes for drawing barbed wire at 30 cm c/c using 8 mm dia vertical 4 TMT steel rods and 6 mm dia stirups at 15 cm c/c fixed 1.5 m above Ground level using steel moulding , curing , transportation to work spot including excavation in all types of soil, fixing in plain cement concrete M15 using 20 mm downsize aggregate including aligning to plumb and line providing including cost of all materials, labour,usage charges of machinery complete (Vol -2, PWD SR -2023-24, Item no-11.62,pg no-96)

006 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per thedirection of Engineerin-charge. (Made of G.I. wire of dia 4 mm) (PWD SR 2023-24,Vol-2, pg no-95, item no-11.58)

007 - Polyurethane based Single Component for Existing Surface : Providing and Applying PU based Elastomeric Liquid Applied PU Water proofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2 , having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2 , and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification (PWD SR 2023-24,pg no-149,item no-15.4)

008 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge (PWD SR 2023-24,pg no-63,item no-9.25) Clearing & grubbing road land including vegetation, bushes, shrubs, saplings by using weed cutter / minor equipment.

009 - Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. (PWD SR 2023-24,Vol 3,page no-9,Item no -2.6 )

010 - Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete.(WRD SR 2023-24,Vol 4,page no-101,Item no -8.2.1 )

011 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. For Building (Vol 1,page no-18,Item no -2.11,PWD CSR 2023-24 )

012 - Open Conduit System .Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws . 19/20 mm dia 2 mm thick (Vol-6,KPTCL, item no-1.1.1, pg no- 2of 105)

013 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 . 2.5 mm2 (Vol-6,KPTCL, item no-2.3.3, pg no- 5of 105)

014 - Supplying And Fixing Metal Fan Box with Round Hook. No 117.00 (Vol-6,KPTCL, item no-1.13, pg no- 4of 105)

015 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. 2.1.1 Short point upto 3Mtr from tapping point to out let via switch (Vol-6,KPTCL, item no-2.1.1, pg no- 5of 105)

016 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model (Vol-6,KPTCL, item no-6.3.1, pg no- 30 of 105)

017 - Supplying .TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. 5star 1.5 Ton capacity (Vol-6,KPTCL, item no-6.7.2, pg no- 31 of 105)

018 - Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.(Vol-6,KPTCL, item no-6.12, pg no- 32 of 105)

019 - Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI more then 70 percent efficacy more then 80 lumen per W, life more thyen 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF more then 0.95, power loss should less then 5 percent of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20 percent, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition .12W, 6500K (Vol-6,KPTCL, item no-11.11.5, pg no- 47 of 105)

020 - Repairs to steel Almirah with replacement of hinges, lock, handles including finishing and sheet metal work cost of materials, labour, complete as per specifications (Vol-2,PWD SR 2023-24, item no-20.116, pg no- 208)

021 - Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(Vol-2,PWD SR 2023-24, item no-8.49, pg no- 49)

022 - 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Vol-2,PWD SR 2023-24, item no-8.49, pg no- 49)

023 - Providing and fixing 2 mm thick homogenous polyvinyl flooring of approved make, shade and colour, including cleaning and preparing the surface prior to spreading of mat, cost of all materials, machinery, labour etc., complete with all leads and lifts. (For Power House and Allied works) (Vol-4,WRD SR 2023-24, item no-16, pg no- 196)

024 - Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat as per pecifications and as per directions of Engineer in charge (Vol-2,PWD SR 2023-24, item no-8.53.1, pg no- 50)

025 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge (Vol-2,PWD SR 2023-24, item no-8.64, pg no- 51)