Karnataka Neeravari Nigam Limited Tender

code04 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 6 Sqmm, 2 Core, (24 GI Wire - 1.4 mm)

code05 - Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 2.5 square mm

code06 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications

code7 - Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000hr at Lumen Maintenance of 70 percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment and impact resistance of complete Luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surgel Protection Min SKV along with Over voltage or Over load, short circuit or miss wiring protection. Compatible for pole mounting with outer diameter of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50 to 60Hz application. Compliance to IS10322 IEC60598, LM79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with. W System Power consumption. LED Efficiency greater than 1301m per w. nominal CRI greater than 75. Luminaire manufacturer should have in house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier word mark/name shall be Engraved/Embossing on the die cast housing/Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should begiven by LED

code08 - Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000hr at Lumen Maintenance of 70percent, maximum light intensity should be between 6O degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment and impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection Min 5KV along with Over voltage/Over load, short circuit/miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to lS10322/IEC 60598, LM79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the light site location with minimized minimal tools. LED Light fixture with. W System Power consumption. LED Efficiency greater than 1301m/w. nominal CRI greater than75. Luminaire manufacturer should have in house facility accredited by NABL/CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark/name shall be Engraved/Embossing on the die cast housing/Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical. conditions as mentioned above should begiven by LED

code09 - Supplying and fixing of Hot dip Galvanized M.S.Bracket suitable for outdoor luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1500 mm Standard 40/50 mm dia

code10 - Supplying and Fixing Chemical earthing for grounding. Conduits, IC cut outs and other equipments backfill compound which is non corrosive, thermally conductive, potential to permissible limits, superior Fault conduct ion capacity, nontoxic, eathe resistance and capable of achieving ohmic value less than one ohm using 4ft. Copper bonded rod with backfill compound

code11 - Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC61439-3 and IK09 tested as per IS/IEC62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required clA, bolts,nuts,etc.,

code12 - Supplying and fixing miniature circuit breaker son existing MCB distribution boards using necessary fixing material sand C Type curve, indicator ON/OFF ,energy cross 3 with Short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC60898. 6-32 A DP

code13 - Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tape red inverted wood enplugs screws. 12" x 12" x 2"

code14 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module

code15 - Supplying and fixing of Porcela infuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32 A

code16 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

code17 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

code18 - Supplying, erecting, testing and commissioning of OFF-LINE UPS system suitable for operation on 230V,50Hz,A/C supply, with all accessories complete and Excluding batteries and wiring complete. 2 kVA OFF LINE UPS

code19 - Supplying installation testing and commissioning of 12V AH batteries in polypropylene container for D.G.sets Low maintenance batteries, plate type. 150 AH capacity

code20 - Supplying and fixing of KOEL Generator (125KVA) Starter including cost of material, transportation, fitting, comissioning and labour charges.

code21 - Supplying and fixing of KOEL Generator (125KVA) Radiator with fan assembly including cost of material,transportation, fitting and labour charges.

code22 - Supplying and fixing of Starter Panel including transportation, fitting and cost of material and labour charges.

code23 - Engine tune up with replacement of heater plugs and idling setting charges including cost of new heater plugs and labour charges.

code24 - Engine oil changing including cost of Engine oil and labour charges.(Quantity of 25 liter at a time and 05 liter for periodic topup)

code25 - Alternator overhauling including worn out parts replacement charges and cost of material, transportation, fitting, comissioning and labour charges.

code26 - Replacement of V-Belt from Fan to Pulley including cost of new V-Belt and labour charges.

code27 - Replacement of V-Belt from Fan to Pulley including cost of new V-Belt and labour charges.