Karnataka Neeravari Nigam Limited Tender

code04 - Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (25 mm dia PVC Elbows)

code05 - Supply and delivery at site special moulded variety PVC elbows as perIS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (63 mm dia PVC Elbows)

code06 - Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (50 mm dia PVC Tee)

code07 - Labour charges for laying and jointing GI pipes with earth work including fixing collars, elbows, tees, bends, gland cocks and other fittings with cuts and threads, white lead paints wherever necessary, conveying the materials from office to workspot and retuning the surplus materials from workspot to stores etc complete. (50 mm dia GI pipes & specials.)

code08 - Labour charges for laying and jointing GI pipes with earth work including fixing collars, elbows, tees, bends, gland cocks and other fittings with cuts and threads, white lead paints wherever necessary, conveying the materials from office to workspot and retuning the surplus materials from workspot to stores etc complete. (80 mm dia GI pipes & specials.)

code09 - Providing & Fixing sluice valves/ Butterfly Valves (labour charges only) conforming to relevant ISS with latest amendments as detailed below for the following diameter and types with two Each of MJ collars, two flanged spigots, conveying to work site, loading, unloading, stacking with appurtenances. with all lead and lifts, aligning, fixing and testing with appurtenances. etc. complete. (50 mm dia valve)

code10 - Providing & Fixing sluice valves/ Butterfly Valves (labour charges only) conforming to relevant ISS with latest amendments as detailed below for the following diameter and types with two Each of MJ collars, two flanged spigots, conveying to work site, loading, unloading, stacking with appurtenances. with all lead and lifts, aligning, fixing and testing with appurtenances. etc. complete.(80 mm dia valve)

code11 - Providing & Fixing Micro Jet

code12 - Providing & Fixing Rain Bird Jet

code13 - Providing & Fixing Popup Jet

code14 - Providing PVC Gum for

code15 - Providing & Fixing Dripper (Each pack 100 No's)

code16 - Providing & Fixing Dripper pipe connector (16mm)

code17 - Providing & Fixing 16mm Drip washer (Each pack 100 No's)

code18 - Providing & Fixing 25mm FTA

code19 - Providing & Fixing 25mm MTA

code20 - Providing & Fixing 20 mm PVC end Cap

code21 - Providing & Fixing 25mm PVC end Cap

code22 - Providing & Fixing 16 Sqm Drip pipe

code23 - Providing & Fixing Spinkler jet

code24 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring stripthickness and resistivity as per IS-3975 (25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm)

code25 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring stripthickness and resistivity as per IS-3975 2 (16 Sqmm, 4.0Core, (12 GI Strips - 4 x 0.8 mm)

code26 - Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 V 3 phase and wired after fixing to the existing wooden board for motor.

code27 - Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired Completely. (Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA.) 16 - 32 A TP/ (16 - 32 A SP )

code28 - Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired Completely. (Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA. (63 A TP )

code29 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.

code30 - Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 months

code31 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 percent, maximum light intensity should be between 60 degrees to70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains,Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 &LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facilitycertified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.(LED Streetlight 25W)

code32 - Supplying & fixing of Surface mounting type retrofit type -LED tube Wcomprising of LED linear source with CCT 6500 degree K, CRI 70.efficacy 80 lumen per W, life25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driverintegrated in the system, with PF 0.95, power loss should 5 of lamp Wage.,short circuit & open circuit protection to be integrated in the circuit, THD less than 20, Life as per LM 79. The operating input voltage should be between 130 to 75 V. BIS Approved and Tested by NABL/CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition. (8W-10W (T8)

code33 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70, maximum light intensity should be between 60 degrees to70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains,Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 &LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Powerconsumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facilitycertified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source..( LED Streetlight 40W)

code34 - 1 11 kV Insulation Tapes (HV BT Tapes)

code35 - 1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 (PVC Wire - 4 SqmmWeight per 100 Mtr Coil: 2.4 Kg)

code36 - Supplying & fixing of Surface mounting type retrofit type -LED tube ....... W comprising of LED linear source with CCT 6500 degree K, CRI 70%.efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5 of lamp Wage.,short circuit & open circuit protection to be integrated in the circuit, THD less than 20, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standardelectrical condition (18W-20W (T8))

code37 - 1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 (PVC Wire - 2.5 SqmmWeight per 100 Mtr Coil: 1.8 Kg)

code38 - Providing & Fixing 1.5mm copper Wire

code39 - Providing & Fixing Insulation tape

code40 - Providing & Fixing Transperent tape

code41 - Providing & Fixing Lax 15 sqm

code42 - Providing & Fixing Lax 10 sqm

code43 - Providing & Fixing Decorative Light

code44 - Providing & Fixing Colter Hameer Stater

code45 - Providing & Fixing Stater Button

code46 - Providing & Fixing Spot light for fountain

code47 - Men's Architectural Art Sclupture

code48 - WoMen's Architectural Art Sclupture

code49 - Dog's Architectural Art Sclupture

code50 - Ox's Architectural Art Sclupture

code51 - Sheep's Architectural Art Sclupture

code52 - Cow's Architectural Art Sclupture

code53 - Children Architectural Art Sclupture

code54 - Buffalo's Architectural Art Sclupture

code55 - Kettle Drum (Jaggalagi) Art Sclupture

code56 - Bulluckart (Chakkadi) Art Sclupture

code57 - Sitting Chairs