Karnataka Neeravari Nigam Limited Tender

Page No.17 Sl. No. 6.32 Volume II - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work.

Page No.42 Sl. No. 8.5.2 Volume II - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ- ing cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work.

Page No.60 Sl. No.9.11 Volume II - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work.

Volume -II , P.No. 104 ,Sl.No. 12.54 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work.

Page No.110 Sl. No.12.90, Volume ll - Providing and fixing of 3 track into 2 panel sliding windows made out of multi chambered UPVC Matching to RAL-9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware and Multi point locking system with touch lock. Wall thickness of frame sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm The cost is inclusive of all fixtures and separate charges for minor T and Ps shall not be made complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work

P.No.104 Sl.No 12.55.1 - Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top and bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet and 30x50mm wide to form stiles and 5mm thick and 75mm wide Prelaminated PVC Sheets for top rail, lock rail and bottom rail on either side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles and rails with PVC Designer beading on either side and joined together with solvent cement adhesive etc., Complete as per manufacturers specification and direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.with both side prelam complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work

Page No.73 Sl. No10.26 - Providing, fabricating and fixing of 10 mm thick Decorative Grooved Bamboo Wood Wall cladding with panel size 1220mmx2440mm, thermal insulation value 2.2 J/g oC and having density 1300kg/m3. The base material shall be of MDF and the surface of Bamboo shall be coated with Graphene based PU Coating. The material shall possess special properties such as Fire resistant, Thermal insulation, Sound absorbent and UV and Water resist- ant. The panel shall be fixed on walls using Mild steel screws or by using special adhesives as per direction of Engineer in charge complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work

Page No. 50 Sl. No.8.5 - Providing and applying white cement based putty of average thick- ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work

Page No.47 Sl. No. 8.35.2 - Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plas- tered surfaces :Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge

P.No. 113,Sl.No.10.1.6 - Supplying PVE Ringtite pipes conforming ti IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering trenches, lauing true to line and level and perfect linking at joints, testing and commissioning, including lading unloading at bothe destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointsn of approved types, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel pr selected earth available from the excavation etc., complete and giving necessary hydraulic test to the required pressuring as per ISS Contractor will make his own arrangements for procuring water for testing etc., for PVC pipes 90mm dia., 6kgs/sqcm and class 3

P.No. 131 ,Sl.No. 14.2.1 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work

Page No.119 Sl. No.13.15 - Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work

P.No. 122 Sl.No. 13.32.2 - Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer0in-charge Concealed work including cutting chases and good the walls etc. - 20mm nominal dia pipes complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work

Page No.207 Sl. No. 20.102 - Repairs to roof with available corrugated zinc sheets/ A.C.sheets with new J bolts, screws and washers etc., on existing reeper and rafters. complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work.

Page No.82 Sl. No. 11.16.3 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work

Page No.26 Sl. No.7.38 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 per total coated thickness with zinc coating 120 grams per m2 as per IS 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work

Page No.48 Sl. No. 8.41 V - Painting with synthetic enamel paint of approved brand and manu- facture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.complete all lead and lift and as per the drawings and directions of the Engineer in charge of the work