Karnataka Neeravari Nigam Limited Tender

KSRB M400-17 Providing, laying, spreading and compacting crushed stone aggregate of granite/trap/basalt to wet mix macadam (WMM) specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub base/ base course on well prepared surface and compacting with vibratory roller to achive desired densitycomplete as per specifications, with all lead and lifts for all materials and all other incidental charges etc, complete and as directed by the Engineer-in-charge.

Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC at 360 kg/cum and coarse aggregate at 0.69 cum, fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-2016, with Superplastizer at 3 Its conforming to IS 9103-2008. mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, plates laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). & Spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, including groove cutting charges, joint filler, separation membrane of impermiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries,all lead & lift charges for all materials etc., complete as per specifications and all other incidental charges etc, complete and as directed by the Engineer-in-charge.

KSRRB M2900-1 Plain cement concrete M10 mix for foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing,cost of materials ,labour HOM complete as per specifications, with all lead and lifts for all materials and all other incidental charges etc., complete and as directed by the Engineer-in-charge.

Providing and laying in position plain/Reinforced cement cement concrete M20 for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm & down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts confirming to IS 9103-2008,concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc., including cost of labour, HOM curing etc., complete as per specifications, with all lead and lifts for all materials and all other incidental charges etc., complete and as directed by the Engineer-in-charge.

Providing and laying plain/reinforced cement concrete for side drains using M20 nominal mix concrete with OPC cement at 300kgs. with 20mm and down size granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum machine mixed, well compacted for walls and bottom including centering, shuttering, cost of all materials, HOM of machinery, curing etc., complete excluding cost of steel as per MORTH specification No. 1500, 1700, 2200. including cost of materials, labour, HOM complete as per specifications, with all lead and lifts for all materials and all other incidental charges etc., complete and as directed by the Engineer-in-charge.

KSRB 4.9.2 Providing T.M.T. bars Fe500 steel reinforcement for R.C.C. work including straightening, cutting, bending,, hooking, placing in position, lapping and or welding wherever required,tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design, cost of materials,labour,HOM complete as per specifications, with all lead and lifts for all materials and all other incidental charges etc., complete as per design and drawings and as directed by the Engineer-in-charge.

KSRB 2.3 : Filling available excavated earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering including cost of all labour complete as per specifications, with all lead and lifts for all materials and all other incidental charges etc., complete and as directed by the Engineer-in-charge.

Providing and laying 600mm dia reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing HOM complete as per specifications, with all lead and lifts for all materials and all other incidental charges etc., complete and as directed by the Engineer-in-charge.

Providing and laying 100mm thick pre-cast cover slabs over drains of width not exceeding 800 mm using M20 concrete reinforced with steel @ 6.00 kg/Sqm, slabs JOinted in CM 1:3 proportion and nicely finished including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, HOM, curing, lead and lift charges etc., complete as per specifications, with all lead and lifts for all materials and all other incidental charges etc., complete and as directed by the Engineer-in-charge.

Providing and fixing RCC name board of size 1.35x0.60x0.04 mtrs fixed in reinforced cement concrete poles of size 0.10x0.10x2.60mtrs in cement concrete M 20 proportion using 20mm and down size graded metal machine mixed with 10mm dia main steel bars and 8mm dia stirrups as shown in drawing. The board shall be provided with 12mm thick cement plaster in cement mortar 1:3 on both the sides. The poles shall be embedded in the ground for a depth of 0.5 mtrs with cement concrete M 10 proportion. The board shall be fixed as per the drawing and at the place indicated by the Engineering charge of the work. The cost includes excavation, bare cost of all materials, cost of steel, centering, transportation charges, fixing charges, labour and HOM etc., The work shall be carried out as per the detailed specifications and drawings with all lead and lifts for all materials and all other incidental charges etc., complete and as directed by the Engineer-in-charge.