Karnataka Industrial Areas Development Board Tender

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work. In Soil (Ordinary)

Supplying & fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clmaps, bolts, nuts and washers etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 25 sq.mm

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 2.5 Sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 6 Sqmm.

Supply and fixing polished wood board made of not less than 15 mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 20” X 20” X 2.5”

Supplying and fixing of porcelain fuse channel with cutout on existing wooden/ panel using necessary nuts, bolts, & washers etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 63 Amps.

Supplying and fixing of class ‘A’ (Medium duty) GI pipe of wall thickness not less than 3.25 mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 50 mm dia

Fabricating, supplying and erecting swaged tubular pole of height 9 mtr having three sections and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved quality and colour and M.S. Base plate of suitale size welded at the bottom of the pole (as per IS) and 40mm dia GI / flexible PVC pipe of 1 Mtr length fitted to the heavy gauge polycarbonate control box including 5 way connector of size 167x125x182mm for 7.5 Pole/ 200 x 160 x 98mm for remaining length of pole with front opening cover, with locking arrangements and suitable capacity MCB/ DP switch. The pole shall be erected n cement concrete work (1:2:4) including excavation and refilling of planting depth of the pole to the ground level and the coping CC shall be upto 0.6 M above ground level as epr IS 2713-7 with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Erection of heavy duty pole on Foot path) 9mt (5mt hb 165.1mm dia 4.85 mm thick x 2mt hm, 139.7 mm dia 4.50 mm thick x 2m Ht, 114.3 mm dia 3.65 mm thick) as per IS 410 SP 32

Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M.S. pipe with 2” dia 1.5m long M.S. bracket all are welded with suitable angle using 6mm thick M.S. Sheet, grip bolts & nuts as required suitable for 9 to 12mtr MS tubular pole with necessary two coats of approved painting with all other accessories etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Single bracket 1.5mtr length

Supply of LED Streetlight luminaire with pressure die castaluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @Lumen Maintenance of 70%, maximum light intensity shouldbe between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistanceof complete luminaire > IK08. Power Factor >0.9 withmains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatiblefor pole mouting with outer dia of 40mm to 50mm. UniversalVoltage driver to operate wide voltage range from 100V to270V 50/60Hz application. Compliance to IS 10322/IEC60598, LM 79 & LM 80 Adherence with RoHS. UL approvedMCPCB. Top access street light with single screw to ensureease of maintenance at the sight site location with minimizedminimal tools. LED Light fixture with 120 W System Powerconsumption. LED Efficiency>130lm/w, nominal CRI >75.Luminaire manufacturer should have in-house facilityaccredited by NABL/CPRI & any Government certifiedagency & Design & Development facility certified by ISO9001:2008 . Housing with supplier word mark /name shallbe Engraved / Embossing on the die cast housing/ Bodypart. Warranty of 2 Years against any manufacturing defectworking under standard electrical conditions as mentionedabove should be given by LED manufacturer & Cree /Nichia /Lumiled /Osram make LED Source with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 120W

Fabricating supplying and mounting MS box Made out of 18 SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 tank treatment with powder coated paint and finally finished with approved colour etc.,with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 18SWG

Supplying, fixing, wiring, earth electrode for grounding conduits IC cutouts and other equipment on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 mts long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying and fixing miniature circuit breakers/Isolators on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 40A TPN

Supplying and fixing 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 rating and as per IS-13947 with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 40 Amps

Supplying and fixing microprocessor based electronic timer (without contactor, Din mounting using necessary bots, nuts, and washer etc.,) 3-120 Sec setting with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying 100 amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeves, mounted on phenolic /FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specifications with necessary bolts, nuts and washers etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 100Amps 4x30x6mm aluminium strips.

Supplying and fixing angle frame work fabricated out of M.S. Angle iron and M.S. flat with bolts, washers ec., and painted with 2 coats of red oxide and then 2 coats of approved paint with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 40 x 40 x 6 mm.

KSRB 4-1.3 : Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180kgs,with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed,machine mixed, concrete laid in layers not exceeding 15cms. Thick, well compacted, in foundation,including cost of all materials, labour, HOM of machinery, curing with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

KSRB 4-1:6: Providing and laying in position plain cement concrete of mix 1:2:4 at 240kgs, using 20mm & down size graded granite metal coarse aggregates at 0.878 cum and fine aggregate at 0.53cum, machine mixed concrete laid in layers not exceeding 15cms., thick, well compacted, in foundation & plinth including cost of all materials, labour, HOM of machinery, curing with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 25 Sqmm Long Barrel with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Painting of existing street light pole after scrapping the old paint and painted with suitable colour enamel/Silver paint including coping/footing of the pole with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 8Mtr and above street light pole.

Dismantaling of existing old corrogated/ scrap FTL/SV/M.V Street light Fittings with suitable clamps, bracket, bolts and nuts including loading and unloading to nearest KIADB store with all lead and lifts complete as per specifications and directions of engineer in charge of the work.