Karnataka Industrial Areas Development Board Tender

Supply of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 18SWG with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying and fixing angle iron frame work fabricated out of MS angle iron..and MS flat…with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2 with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 mm2 with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 100 Amps 16 Amps with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

a. GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg b. Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each c. Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations up to 25HP/18KW)y with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Fabricating, supplying and erection 8 Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sec for ….Mtrs pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom 135 mm, top 70mm with 3mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended and engineer incharge of the work with all lead and lifts complete as per specifications 8 m - Top 70 mm and Bottom 135 mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sec for ….Mtrs pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom ..mm, top….mm with 3mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended and engineer incharge of the work with all lead and lifts complete as per specifications 9 m - Top 70 mm and Bottom 155 mm dia 9 m - Top 70 mm and Bottom 155 mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Single Arm Bracket with 1500 mm Standard 40/50 mm dia40/50MM dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 2000 mm Standard 40/50 mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Fabrication, Supplying, Erection, Testing and Commissioning of 16 mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5times of top section) thickness as per Fabrication, Supplying, Erection, Testing and Commissioning of ...... ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grades 355 JO/ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with die cast LM-6 pulleys, stainless steel axle, Phos phorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7/19-core, Factor of Safety as per TR no-7). 2.5 mm2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual/power tool (Suitable reversible geared motor operating on 230/415V, 50Hz, shall be provide above 15 Mtr mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239.The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. (excluding foundation) as per technical data. 16 m - Top 150 mm and Bottom 410 mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned LED Streetlight 120 with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly carbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with System Power consumption. LED Efficiency> 1301m /w, nominal CRI >75. Luminaire manu facturer should have in- house facility accredited by NABL / CPRI & any Govern ment certified agency & Design & Develop ment facility certified by ISO 9001 :2008. Housing with supplier word mark / name shall be Engraved Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & ree/ Nichia/ LED Floodlight 150W with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

ixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply and fixing of Heavy Duty Copper Terminal Long Barrel. 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply and fixing of 4pole power contactor with NO/NC contacts on existing ood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Laying of UG cables by Trench less technology by adopting horizontal boring & drawing of cable including preparation at site) with HDPE pipe with all lead and lifts complete as per specifications. a) Normal soil 5” bore size. with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy class-3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898. with all lead and lifts complete as per specifications 6-32 A TPN with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy class-3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898. with all lead and lifts complete as per specifications 50-63 A TPN with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. -In all kinds of soils. Depth upto 1.50m) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Earth work excavation for foundation of structures upto 3 mtrs. by mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

KSRB 4-1.3: Providing and Laying in position plain cement cocrente of mix 1:4:8 with OPC Cement @ 180 Kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.85 cum and fine aggregtes @ 0.57 cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

KSRB 4-1.6: Providing and Laying in position plain cement cocrente of mix 1:2:4 with Cement @ 240 Kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.459 cum machine mixed concrete laid in layers not exceeding 15 cms. thick well compacted, in foundation and plinth and cills, including cost of all materials, labour, HOM of machinery, curing with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

KSRB 4.9.1: Providing mild steel reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, and Laying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid)cost of materials labour, HOM of machinery with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply and Fixing of PVC Pipe as per IS-2509 PVC PVC Pipe - 32 mm Dia for cable entery at each pole with all lead and lifts complete as per specifications and directions of engineer in charge of the work.