Karnataka Exhibition Authority Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 12,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
KEA/2019-20/EL/WORK_INDENT185Bid Award Id
ViewTender No
KEA/2019-20/EL/WORK_INDENT185Tender Authority
Karnataka Exhibition Authority ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
-do- Ordinary rock comprising of lime stone,sand stone,hard laterite,fissured rock,conglomerate or other soft or disintegrated rock which may be querried or split with crow bars. Boulders which do not require blasting having max. dia in any direction of more than 300mm: found lying loose on the surface or embedded in river bed,soil,talus,slope wash and terrace material of dissimilar origin with all lead & lift as directed by the Engineer in Charge.
0-3 mtr depth
2825.68
406897
144
... More
-do- Hard rock- Any rock excavation by using mechanical plant / machinery. 0-3 mtr depth
762.59
645151
846
... More
Providing and constructing of Manhole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15mtr. alround the chamber and brick masonry in C.M. 1:4 plaster with bricks of approved quaility and CM plaster 1:3 proportion 12mm thick inside and outside except for the conical surface outside where the thickness of plaster shall be 20mm thick, with1 to 6 slope in the concrete towards the central drain, finished smooth and fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size including supplying and fixing SFRC manhole frame and cover conforming of IS 12592 (Part-I):1988 & IS 12592 (Part-II):1991 with latest amendments in CC 1:2:4, supplying & fixing of plastic foot steps staggered at 30cms apart as directed, watering, curing, barricading, danger lighting, pouring tar over M.H frame and cover, cost of tar, shoring, strutting, dewatering, engraving manhole No. on the inner and outer conical surface etc, as per the drawing with all lead and lift for various diameters and depths noted below, as directed by the Engineer in-Charge.
With table moulded bricks of approved quality and heavy duty SFRC manholes frame and cover for 1.20mtr dia
-do- for 1.0 mtr depth
74
1425658
19265.65
... More
-do- for 1.10 mtr depth.
8
163036
20379.56
... More
-do- for 1.20 mtr depth.
19
410256
21592.47
... More
-do- for 1.30 mtr depth.
3
68119
22706.38
... More
-do- for 1.40 mtr depth.
2
47640
23820.3
... More
-do- for 1.50 mtr depth.
11
275365
25033.21
... More
-do- for 1.60 mtr depth.
1
26147
26147.12
... More
-do- for 1.70 mtr depth.
1
27261
27261.03
... More
-do- for 1.90 mtr depth.
1
29587
29587.86
... More
-do- for 2.00 mtr depth.
23
706140
30701.77
... More
-do- for 2.30 mtr depth.
1
34983
34983.68
... More
- do - with table mouled bricks of approved quality and Heavy duty SFRC manhole frame and cover for 1.50 mtr dia dia.
for 2.60 mtr depth.
1
48395
48395.88
... More
-do- for 2.70 mtr depth.
1
50177
50177.68
... More
-do- for 2.80 mtr depth.
1
51860
51860.47
... More
Supplying Unplasticised PVC pipes conforming to IS 15328:2003 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (including cost of specials) with jointing of approved type, with all labour, including encasing the pipe alround to depth of not less than 15cms with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Concractor will make his own arrangements for procuring water for testing) with all lead and lifts as directed by Engineer In-Charge.
'-do- for 160mm dia SN8 class ringtight.
4465.18
1937888
434
... More
Providing Murrum / Gravel Bedding for the pipeline trenches including watering and consolidation by punners etc., complete (In Black cotton soil and rock reaches) with all lead and lift as directed by the Engineer-in-Charge
401.87
104084
259
... More
Refilling pipeline trenches and foundation with selected available earth from trench excavation and foundation including watering, consolidation in layers of 15 cms., thickness with Vibro Rollers including disposing off the surplus earth complete with all lead and lift as directed by the Engineer in Charge.
7625.87
785464
103
... More
Providing PVC-U individual UGD House Service connection (Which shall be laid from inside the customer property ) which includes,
a) Supply of PVC - U pipe - SN-8.
b) Providing and fixing of 315mm dia PE inspection chambers with lid consisting of inlet and outlet arrangements with base, riser of minimum 0.42m depth which includes earthwork, fixing in CC 1:2:4 etc., complete c)Civil works like earth work excavation for the pipeline trenches for laying of PVC-U pipes for the House connections in all types of soils, dis-integrated rock, soft rock, hardrock, including cutting of any road, crossing drains, compund, dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonary, cement concrete, wood work, steel work including T&P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable and stacking the serviceble material, restoring the damaged portion inside or outside the property premises, refilling the portion of trenches that are dug open including the linking to existing sewer networks etc,.complete with all lifts and lead as directed by the Engineer In-charge
110mm dia
256
1798400
7025
... More
Road Restoration
Providing, laying, spreading and compacting crushed stone aggregates of granite /trap / basalt of specific sizes to Water Bound Macadam specifications including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel / vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregates, watering and compacting to the required density complete as per specifications. A By manual means Morth Specification etc., complete with all lead and lift as directed by the Engineer-in-Charge
Type A 13.2mm for Grading - II
554.4
1301176
2347
... More
Providing, laying, spreading and compacting crushed stone aggregates of granite /trap / basalt of specific sizes to Water Bound Macadam specifications including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel / vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregates, watering and compacting to the required density complete as per specifications. A By manual means Morth Specification etc., complete with all lead and lift as directed by the Engineer-in-Charge
Type B 11.2mm for Grading - III
554.4
1392652
2512
... More
Cleaning the existing WBM road surface including removing of binding materials and other foreign matter with wire brushed and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and / or compressed air, to receive bituminous treatment including cost of all materials, labour, HOM complete as per Specifications with all lead and lifts as directed by Engineer In-Charge.
3172
66612
21
... More
Providing and applying primer coat with S.S. Bitumen emulsion on prepared surface of granular base such as WMM, including cleaning of road suface and spraying primer at the rate of 0.6 kg/ sqm using mechanical means complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
3172
107848
34
... More
Providing and laying bituminous macadam on prepared surface with crushed course aggregates as per design mix formula for base / binding course including loading of aggregates of F.E. loader, hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixed material in tipper to paver and laying of mixed materials with paver finisher to the required level and grade, rolling by smooth wheeled vibratory and tandem rollers to achieve the desired density, but excluding cost of primer / tack coat and including lead, lift and cost of all materials, labour, HOM complete as per specifications with all lead and lift as directed by the Engineer-in-charge '-do- using 40/60 TPH capacity H.M.P with sensor paver Gr-II (50 mm to 75 mm) with 3.4% VG-30 Bitumen
158.6
951282
5998
... More
Providing and laying semi dense bituminous concrete using crushed agregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment rolling with smooth wheeled, vibratory and tandem roller to achieve the desired compaction as per MORTH specification Clause No.508 complete in all respects complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
'-do- using 40/60 TPH capacity H.M.P with mechanical Paver Gr. II (25mm to 30mm) with 5% VG -30 Bitumin
158.6
1248023
7869
... More
Dismantling and reconstruction CD Works and drains - 50 Nos
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T & P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material complete as per specifications with all lead and lift as directed by the Engineer-in-charge
- do - Rubble stone masonary in cement mortor
150
52650
351
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T & P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material complete as per specifications with all lead and lift as directed by the Engineer-in-charge
- do - Prestressed / Reinforced cement concrete.
67.5
107257
1589
... More
Providings and laying in position plain cement concrete of mix 1:2.4 with OPC @ 240Kgs, with 20mm and down size graded granite metal coarse aggregate @0.878cum, and fine aggregates @ 0.53cum, machine mixed, concrete laid in layers not exceedings 15 cms thick, well compacted in foundation plinth and cills including cost of all materials,labour, HOM curing, complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
45
248625
5525
... More
Providing and construction granite/trap/ basalt size stone masonry in foundation with cement motrar 1:6 stone hammered dressed in courses not less than 20cms high, bond stone at 2m, apart in each course including cost of materials, labour, curing complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
150
722100
4814
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC @ 320Kg, with 20 mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.460 cum with super plasticisers @ 3litres confirming to IS 9103-1999 reafirmed -2008, machine mixed, concrete laid in layers not exceeding 15cm thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels and beams, retaining walls, return walls, walls(any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM curing complete but excluding cost of reinforcement as per specifications with all lead and lift as directed by the Engineer in charge.
22.5
133695
5942
... More
Supplying and fabricating TMT steel bars of all sizes for reinforcements of RCC works including conveying steel to work spot including cleaning, straightening, bending, fabricating, placing in position and tying as per design including cost of binding wire, hoisting etc. complete as per specifications with all lead and lift as directed by the Engineer-in-Charge.
2
110192
55096
... More
HSC CONNECTION TO CUSTOMER OUTLET
Earth work excavation by manual means for pipeline trenches (except building works) including depositing on bank including shoring, strutting, barricading, danger lighting and using sight rails and boning rods at every 100 metres, wherever necessary as directed in the following strata with all lead and lift as directed by the Engineer-in-Charge. 0 to 2 M In all soils mixed with boulders upto 30 cms size and exclusive of disintegrated rock.
5265
1379430
262
... More
-do- in disintegrated rock, soft rock, soft shale, medium hard rock comprising of Lime stone, sand stone, hard shale, shiest, fissured rock without resorting to blasting 0-2 mtr depth
1485
879120
592
... More
Supplying Unplasticised PVC pipes conforming to IS 15328:2003 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, including encasing the pipe alround to depth of not less than 15cms with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Concractor will make his own arrangements for procuring water for testing) with all lead and lifts as directed by Engineer In-Charge.
110mm dia SN 8 class ringtight.
22500
5467500
243
... More
Supplying HDPE pipes conforming to IS 4984:2016 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding as per standard procedure and guidelines including encasing the pipe around to a depth not less than 15cms with soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant ISS including testing and commissioning. The rate is inclusive of required specials and fittings etc.,complete (Contractor will make his own arrangement for procuring water for testing) with all lead and lift as directed by the Engineer in Charge. - do - 160mm dia PE 100 PN 8.0 class (For Casing ).
4450
3012650
677
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T & P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material complete as per specifications with all lead and lift as directed by the Engineer-in-charge
.-do lime / cement concrete by manual means, Cement concrete grdae M-15 & M-20
267
148719
557
... More
Providing and laying in position plain cement concrete of mix 1:2:4 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregates @ 0.459cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2 etc., complete with all lead and all lifts as directed by Engineer in charge
267
1432455
5365
... More
CONSTRUCTION OF 6.0 M DIA RCC WET WELL WITH PTU
Earth work in excavation for foundations of structures by Mechanical means as per drawing and technical specification, including setting out,construction of shoring, strutting, barricading, danger lighting, bracing, removal of stumps and other deleterious matter,dressing of sides and levelling the bottom of trench to the extent required, utilising the available excavated earth locally for the work etc complete with all lead and lift as directed by the Engineer in Charge. -do- Ordinary / all soil / hard soil 0-3 mtr depth
523.25
45522
87
... More
-do- Ordinary rock comprising of lime stone,sand stone,hard laterite,fissured rock,conglomerate or other soft or disintegrated rock which may be querried or split with crow bars. Boulders which do not require blasting having max. dia in any direction of more than 300mm: found lying loose on the surface or embedded in river bed,soil,talus,slope wash and terrace material of dissimilar origin with all lead & lift as directed by the Engineer in Charge. 0-3 mtr depth
470.92
54626
116
... More
-do- Hard rock- Any rock excavation by using mechanical plant / machinery. 0-3 mtr depth
52.32
35420
677
... More
3 - 6 M depth -do- Ordinary / all soil / hard soil with Dewatering
192.6
22880
118.8
... More
-do- Ordinary rock comprising of lime stone,sand stone,hard laterite,fissured rock,conglomerate or other soft or disintegrated rock which may be querried or split with crow bars. Boulders which do not require blasting having max. dia in any direction of more than 300mm: found lying loose on the surface or embedded in river bed,soil,talus,slope wash and terrace material of dissimilar origin with all lead & lift as directed by the Engineer in Charge. With Dewatering
(3 - 6m depth)
192.6
30738
159.6
... More
-do- Hard rock- Any rock excavation by using mechanical plant / machinery. 3-6 mtr depth With Dewatering
96.3
89905
933.6
... More
6 - 9 M depth -do- Ordinary / all soil / hard soil With Dewatering
16.73
2288
136.8
... More
-do- Ordinary rock comprising of lime stone,sand stone,hard laterite,fissured rock,conglomerate or other soft or disintegrated rock which may be querried or split with crow bars. Boulders which do not require blasting having max. Dia in any direction of more than 300mm: found lying loose on the surface or embedded in river bed,soil,talus,slope wash and terrace material of dissimilar originwith all lead and lifts as directed by Engineer In-Charge. (6- 9m depth)
With Dewatering
41.83
7679
183.6
... More
-do- Hard rock- Any rock excavation by using mechanical plant / machinery. 6-9 mtr depth With Dewatering
25.1
26927
1072.8
... More
Providing and laying C.C.1:1.5:3 proportion for foundation (Screed layer) with 20 mm and down size of approved gradation hard broken granite, trap, basalt or with any other approved hard aggregate including cost and conveyance of all materials including plywood / steel form work, machine mixing, laying, tamping, curing etc., complete with all lead and all lifts as directed by Engineer in charge
12.66
68752
5430.72
... More
Providing and laying vibrated M30 design mix for R.C.C. Works with 20 mm and down size of approved gradation hard broken granite, trap, basalt or any other approved hard aggregate, including, cost and conveyance of all materials, including plywood/steel form work, centering, scaffolding, cement mortar, plastering in CM 1:3 proportion, 20mm. thick for inside with admixture of water proof compound of requisite proportion of approved quality including weigh batch plant mixing, curing, making construction joints wherever necessary and giving satisfactory water proof testing etc., complete (excluding cost of reinforcement) for floor slab, resting on ground. contractor will make his own arrangements for procuring water for testing) (minimum Cement @ 400 Kgs) complete with dewatering with all lead and lifts as directed by Engineer in charge.
31.19
225703
7236.4
... More
Providing and laying vibrated M30 Design mix using 20mm and down size of approved gradation hard granite, trap or basalt broken metal including weigh batch plant mixing, shoring, strutting, plywood/steel form work, curing etc., complete with dewatering with all lead and lifts as directed by Engineer in charge (Minimum cement @400Kgs) - do- for RCC steining below ground level
62.18
608020
9778.4
... More
- do- for RCC steining above ground level upto 3.5 mtr height
30.69
302922
9870.4
... More
Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @ 340Kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.70 cum and fine aggregates @ 0.47cum, with superplastisiser @ 3 ltrs confiorming to IS 9103-1999, Reaffirmed -2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns, lintels, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, but excluding cost of reinforcement as per specifications complete with all lead and lift as directed by the Engineer-in-charge.
51.37
312946
6092
... More
Providing and laying vibrated M30 design mix for RCC work using 20mm and down size metal of approved gradation hard broken granite ,trap, basalt or with any other approved hard broken granite , including weigh batch plant mixing cost and conveyance of all materials with all lead and lift for RCC works in 15 Cms, thick layers well compacted curing, with necessary plywood / steel form work, centering etc., plastering and smooth finishing to the exposed faces in CM1:4 proportion. 12mm thick etc., complete for main and secondary beams below & above floor level(Cement @ 400 Kgs) with all lead and lift as directed by the Engineer in Charge.
11.06
78110
7062.4
... More
Providing and laying vibrated M30 design mix for RCC work with 20 mm and down size of approved gradation hard broken granite, basalt, trap or any other approved hard aggregate including cost and conveyance of all materials with all lead and lift including weigh batch plant mixing, centreing plywood / steel form work, scaffolding tamping, curing, cement mortar plastering in C.M. 1:3 proportion 12 mm. thick for inside surface etc., complete (excluding cost of reinforcement) for R.C.C. slab (Flat slab) (Minimum Cement @ 400 Kgs) as per specifications with all lead and lift as directed by the Engineer in Charge.
15.35
193446
12602.4
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC @ 24 Kgs, with 12mm and down size graded granite metal course aggregates @ 0.05175 cum and fine agreegates @ 0.0345 cum with super plasticisers @ 0.225 ltrs, machine mixed, well compacted for plain chajja of 7.5cms average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete but excluding cost of reinforcement complete as per specification with all lead and lift as directed by the Engineer-in-charge.
9.02
4004
444
... More
Providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specifications etc.., complete as per specifications with all lead and lift as directed by the Engineer-in-charge.
248.92
79654
320
... More
Providing and fixing pull and push type rolling shutters of approved make out of 18 gauge, 75mm wide cold rolled steel lathes of convex corrugations, with side guides and bottom rails with interlocking arrangements for steel lathes by means of alternate clips suspension shaft with high tension coil type springs, two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside and outside locking with push and pull operations complete including pulling hooks, 4 Nos. handles with all fittings and accessories, painted with a coat of red lead paint (Without top cover) cost of materials, labour HOM complete with all lead and lift as directed by the Engineer-in-charge.
10
26070
2607
... More
Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting, materials, labour, HOM complete as per specifications with all lead and lift as directed by the Engineer-in-charge.
5
2410
482
... More
Providing and fixing in position in cement concrete 1:3:6 steel glazed windows and ventilators side hung / top hung fully openable as per approved drawings using Z angles of 25x33x3mm. weighing 1.419 kg/m both for outer and inner frames and central mullion section of size 25x46x3 mm weighing 2.28 kg/m duly providing T-setion 19x19x3 mm weighing 0.839 kg/m for glazing of windows not more than 34 cms. c to c including providing and fixing 4 mm thick reeded glass with teak wood beading of required size, all steel sections should confirm to IS 7452:1990, 4 Nos. of hold fasts of approved size, section should be cut to length welded and electrically grinded subdividing frames of unit shall be tenonned and revetted into the frames electrically. All the steel surface shall be throughly cleaned free of rust and painted with one coat of anti-corrosive paint and finishing with two coats of ready mix paint of approved colour and make including cost of materials, fixtures, labour and HOM, complete with all lead and lift as directed by the Engineer-in-charge.
10.8
42260
3913
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint etc., complete with all lead and lift as directed by the Engineer-in-charge. -Do- 65mm x 65x8 mm angle iron
15
27315
1821
... More
Supplying and fabricating TMT steel bars of all sizes for reinforcements of RCC works including conveying steel to work spot including cleaning, straightening, bending, fabricating, placing in position and tying as per design including cost of binding wire, hoisting etc. complete as per specifications with all lead and lift as directed by the Engineer-in-Charge.
23.04
1269411
55096
... More
Providing and finishing external walls in two coats with waterproof cement paint of approved shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from morter drops and other foreign matter cost of materials, labour, complete as per specifications with primer with all lead and lift as directed by the Engineer-in-Charge.
134.73
13742
102
... More
Providing and applying two coats with Oil bound washable distemper of approved shade on wall surface including priming coat with distemper primer after thoroughly brooming the surface free from mortor drops and other foreign matter including preparing the surface even and sand paper smooth,cost of materials, labour,complete as per specifications with all lead and lift as directed by the Engineer-in-Charge.
189.26
20818
110
... More
Supplying & fixing 40 mm dia G.I. medium duty pipes hand railing 3 rows fixed to 1:2:4 vibrated R.C.C. post of size 100 x 150 mm at top and 150 x 150 mm at bottom placed at 2 Mtr. intervals for a height of 750 mm including curing, painting G.I. pipes with two coats of anticorrosive steel paint over a primer coat with all lead and lift etc., complete with all lead and lift as directed by the Engineer in Charge.
61.82
56318
911
... More
Refilling pipeline trenches and foundation with selected available earth from trench excavation and foundation including watering, consolidation in layers of 15 cms., thickness with Vibro Rollers including disposing off the surplus earth complete with all lead and lift as directed by the Engineer in Charge.
1422.61
146528
103
... More
2 MT CAPACITY GANTRY CRANE GIRDER FOR PUMP HOUSE Supply of ISMB 400 X 140 or suitable size Beam to the Pump house of 6.00 m dia size suitable to carry Gantry to take up the load of 2.00 MT (The beam will be supported on Corbel including painting two coats by anti corrosive of approved colour over one coat of primer) etc complete with all lead and lifts as directed by Engineer In-Charge.
710.86
71086
100
... More
Supply & fabrication of Gantry buildup beam of ISMB 400 to takeup 2.0MT load with 6.60m span including painting two coats by anticorrosive approved colour over one coat of primer with all lead and lifts as directed by Engineer In-Charge.
363.44
36344
100
... More
Supply & fabrication of Channels of size ISLC 250 X100 of 4 Nos with all lead and lifts as directed by Engineer In-Charge.
168
16800
100
... More
Supply & fabrication of 40x40mm MS Squre bar to Suite the 6m Dia size Pump house with all lead and lifts as directed by Engineer In-Charge.
150.72
15072
100
... More
Supply of Stiffner Plate 8mm Thick to be Welded on Both Flanges to Girder and Channels, Jointing of Ends, End Carriage Base Plate, End Carriage end plate, Girder Jointing and For Fixing in the concrete and Plate Welded including 2 coats of anticorrissive paint of approved colour over one coat of primer etc complete.with all lead and lifts as directed by Engineer In-Charge.
630
63000
100
... More
Supply of C.I Wheels With Ball Bearings, Gears, Pinions, Universal Joints (double set), the Long shaft and With Gear Mechanisim For Operation,Cross Trolley ' 5' MT Capacity With Accessories including two Coats of anticorrosive paint over one coat of primer complete with all lead & lift as directed by the by the Engineer in Charge
1
80000
80000
... More
Supply & fixing of '5' MT / suitable Capacity Spur Geared Indef Make Chain Pully Block With required length Lifting Chain including necessary fabrication with all lead & lifts etc., complete with all lead & lift as directed by the by the Engineer in Charge
1
40000
40000
... More
Providing & fixing of Manual Bar Screen Conforming to Relevant Standards with latest amendments with all lead and lift etc., complete as directed by the Engineer-In-Charge..
1
75000
75000
... More
Providing & fixing of Mechanical Bar Screen Conforming to Relevant Standards with latest amendments with all lead and lift etc., complete as directed by the Engineer-In-Charge..
1
950000
950000
... More
Supply & Errection of Cast Iron wall thimble mounted Sluice gate generally as per IS 13349 Standard, size 300 mm (w) x 300 mm (h), Manually Operated, suitable for seating water head, suitable distance, Rising Spindle, Upward Opening, Conventional bottom closure, Open top type flange back frame Gate. Design Head- Class-II Type Conforming to Relevant Standards with latest amendments with all lead and lift etc., complete as directed by the Engineer-In-Charge.
2
472000
236000
... More
PROVIDING, LAYING AND JOINTING OF100MM DIA K-7 CLASS RISING MAIN FROM WET WELL TO RIDGE MH
Cutting road surface for pipeline trenches and disposing off the excavated stuff including barricading, danger lighting etc. complete, in the following classifications with all lead and lift as directed by the Engineer in Charge. Cutting asphalt road
220
139700
635
... More
.-do- Cutting macadam road
440
152240
346
... More
Earth work in excavation for pipeline trenches beyond 600mm trench width as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing using sight rails and boning rods at every 100 meters wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required, utilising the available excavated earth locally for the work etc., complete in the following strata with all lead and lifts as directed by Engineer In-Charge.
In ordinary/All soils/Hard soil ( depth up to 3m)
1320
142560
108
... More
-do- Ordinary rock comprising of lime stone,sand stone,hard laterite,fissured rock,conglomerate or other soft or disintegrated rock which may be querried or split with crow bars. Boulders which do not require blasting having max. dia in any direction of more than 300mm: found lying loose on the surface or embedded in river bed,soil,talus,slope wash and terrace material of dissimilar origin with all lead & lift as directed by the Engineer in Charge.
0-3 mtr depth
352
50688
144
... More
-do- Hard rock- Any rock excavation by using mechanical plant / machinery. 0-3 mtr depth
88
74448
846
... More
Supplying Ductile Iron pipes conforming to IS 8329:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line, level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of DI pipes and specials, (including cost of specials) with rubber gaskets including cleaning the socket and spigot ends with soap solution and applying soft soap to the spigot and socket ends before insertion of rubber gaskets, jacking and fixing in perfect conditions including cost of soap solution, soft soap, waste etc. and giving necessary hydraulic test to the required pressure as per ISS including cost of jointing materials. (Contractor will make his own arrangements for procuring water for testing) with all lead and lift as directed by the Engineer in Charge.
100mm dia DI pipes K-7 Class
2000
1818000
909
... More
Providing Murrum / Gravel Bedding for the pipeline trenches including watering and consolidation by punners etc., complete (In Black cotton soil and rock reaches) with all lead and lift as directed by the Engineer-in-Charge
288
74592
259
... More
Supply and delivery to worksite loading, unloading, stacking and fixing of Resilient seated soft sealing sluice valve with body, bonnet of ductile iron of grade GGG40 / 50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face dimensions as per BS 5163-89 / IS 14846-2000 / DIN 3202 F4 / F5. The stem sealing should be with toroidal sealing rings (minimum 2'O'rings) All the valves should be with electrostatic powder coating both inside and outside with pocket less body passage. The valves shall be supplied with suitable size galvanized bolts and nuts of required numbers as per relevant IS, etc. Complete with all lead and lift as directed by the Engineer-in-charge 50 mm dia DI Sluice Valve PN 16
5
29050
5810
... More
-do- 100 mm dia DI Sluice Valve PN 16
1
10838
10838
... More
Supply,conveying to worksite, loading, unloading,stacking and fixing of single chamber triple function tamper proof (Both the orifices to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40 / 50. All internal parts such as float, shell etc., all cover bolts of austenitic alloy / SS 304 steel, DN 50 float of HOSTAFLON / SS 304 and gaskets and seals of EPDM. Epoxy powder coating (EP- P) inside and outside colour blue RAL5005. The valve shall have drain plug of not less than 15mm nominal pipe thread etc complete with all lead and lifts as directed by Engineer-In Charge. The valves should be designed for all the three function i.e.,
1. Large orifice for venting of large air volumes on start up.
2. Large orifice for intake of large air volumes.
3. Small orifice for discharge of pressurized air during operation.
50 mm dia DI Tamper Proof Air Valves PN 16
5
89945
17989
... More
Providing and laying cement concrete 1:2:4 proportion (excluding cost of reinforcement) with 20mm and down size metal of approved gradation hard broken granite, trap, basalt or with any other approved hard aggregate including cost and conveyance of all materials with all lead and lift and placing the same above or below ground level including plywood / steel form work, machine mixing, laying, tamping, curing, etc., complete including smooth finishing the exposed faces with CM 1:4 proportion 12 mm thick wherever necessary, etc., complete for Anchor Blocks or Thrust Blocks with all lead and lifts as directed by the Engineer-in-Charge
60
369723
6162.05
... More
Supplying and fabricating TMT steel bars of all sizes for reinforcements of RCC works including conveying steel to work spot including cleaning, straightening, bending, fabricating, placing in position and tying as per design including cost of binding wire, hoisting etc. complete as per specifications with all lead and lift as directed by the Engineer-in-Charge.
3
165288
55096
... More
Refilling pipeline trenches and foundation with selected available earth from trench excavation and foundation including watering, consolidation in layers of 15 cms., thickness with Vibro Rollers including disposing off the surplus earth complete with all lead and lift as directed by the Engineer in Charge.
1760
181280
103
... More
Road Restoration
Providing, laying, spreading and compacting crushed stone aggregates of granite /trap / basalt of specific sizes to Water Bound Macadam specifications including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel / vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregates, watering and compacting to the required density complete as per specifications. A By manual means Morth Specification etc., complete with all lead and lift as directed by the Engineer-in-Charge
Type A 13.2mm for Grading - II
160
375520
2347
... More
Providing, laying, spreading and compacting crushed stone aggregates of granite /trap / basalt of specific sizes to Water Bound Macadam specifications including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel / vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregates, watering and compacting to the required density complete as per specifications. A By manual means Morth Specification etc., complete with all lead and lift as directed by the Engineer-in-Charge
Type B 11.2mm for Grading - III
140
351680
2512
... More
Cleaning the existing WBM road surface including removing of binding materials and other foreign matter with wire brushed and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and / or compressed air, to receive bituminous treatment including cost of all materials, labour, HOM complete as per Specifications with all lead and lifts as directed by Engineer In-Charge.
1400
29400
21
... More
Providing and applying primer coat with S.S. Bitumen emulsion on prepared surface of granular base such as WMM, including cleaning of road suface and spraying primer at the rate of 0.6 kg/ sqm using mechanical means complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
1400
47600
34
... More
Providing and laying bituminous macadam on prepared surface with crushed course aggregates as per design mix formula for base / binding course including loading of aggregates of F.E. loader, hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixed material in tipper to paver and laying of mixed materials with paver finisher to the required level and grade, rolling by smooth wheeled vibratory and tandem rollers to achieve the desired density, but excluding cost of primer / tack coat and including lead, lift and cost of all materials, labour, HOM complete as per specifications with all lead and lift as directed by the Engineer-in-charge '-do- using 40/60 TPH capacity H.M.P with sensor paver Gr-II (50 mm to 75 mm) with 3.4% VG-30 Bitumen
70
419860
5998
... More
Providing and laying semi dense bituminous concrete using crushed agregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment rolling with smooth wheeled, vibratory and tandem roller to achieve the desired compaction as per MORTH specification Clause No.508 complete in all respects complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
'-do- using 40/60 TPH capacity H.M.P with mechanical Paver Gr. II (25mm to 30mm) with 5% VG -30 Bitumin
70
550830
7869
... More
CONSTRUCTION OF RCC VALVE CHAMBER (1.2 x 1.2 m)
Earth work in excavation for foundations of structures by Mechanical means as per drawing and technical specification, including setting out,construction of shoring, strutting, barricading, danger lighting, bracing, removal of stumps and other deleterious matter,dressing of sides and levelling the bottom of trench to the extent required, utilising the available excavated earth locally for the work etc complete with all lead and lift as directed by the Engineer in Charge. -do- Ordinary / all soil / hard soil 0-3 mtr depth
17.33
1507
87
... More
-do- Ordinary rock comprising of lime stone,sand stone,hard laterite,fissured rock,conglomerate or other soft or disintegrated rock which may be querried or split with crow bars. Boulders which do not require blasting having max. dia in any direction of more than 300mm: found lying loose on the surface or embedded in river bed,soil,talus,slope wash and terrace material of dissimilar origin with all lead & lift as directed by the Engineer in Charge. 0-3 mtr depth
25.99
3014
116
... More
Providing and laying in position plain cement concrete of mix 1:3:6 with OPC @220kg, with 40mm and down size graded granite metal coarse aggregates @ 0.892cum and fine aggregates @0.465cum, machine mixed, concrete laid in layers not exceeding 15 cms thick, well compacted, in foundation, including cost of all materials, labour, HOM curing complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
3.25
17163
5281
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintles, and beams retaining walls, return walls, walls (any thickness) including attached plasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. with all lead and lifts as directed by Engineer In-Charge.
15.46
91863
5942
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness including attached pilasters, buttresses, plinth cills and string courses cost of all material labour complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
128.64
45924
357
... More
Supplying and fabricating TMT steel bars of all sizes for reinforcements of RCC works including conveying steel to work spot including cleaning, straightening, bending, fabricating, placing in position and tying as per design including cost of binding wire, hoisting etc. complete as per specifications with all lead and lift as directed by the Engineer-in-Charge.
0.9
49586
55096
... More
Providing and fixing M.S. Inspection door of size 60 cms x 60 cms. including M.S. frame, size 50 x 50 x 6 mm and shutters of 3mm thickness with hinges at top and locking arrangements,painting with all lead and lifts etc.,complete as directed by the Engineer-in-Charge.
6
10908
1818
... More
Refilling pipeline trenches and foundation with selected available earth from trench excavation and foundation including watering, consolidation in layers of 15 cms., thickness with Vibro Rollers including disposing off the surplus earth complete with all lead and lift as directed by the Engineer in Charge.
43.32
4461
103
... More
Trenchless technology excavation for laying of 610 mm dia (OD); 10 mm thick M.S Casing Pipe line
Conducting ground penetrating radar survey in a corridor of 4-6 meter width to detect buried utilities like pipes, cables, etc., in such corridor. Marking of the detected utilities on the map of corridor with information of locations and depths to the top of various utilities detected. Work to be conducted using 500 MHz and 300 MHz antenna for best possible resolution and penetration.
Road crossings with dividers upto 50 m width
2
117440
58720
... More
Confined Excavation of shafts for pipe Jacking / Ramming purpose in soil inclusive of H Beam strutting with M S plate / cubical wooden laggings and maintaining the shaft during construction operation and backfilling the same after the compeltion of work. For Shafts of 6 M x 5 M upto a depth of 5 Mtr in all type of soil mixed with soft rock
2
775098
387549
... More
Dewatering of pits or ground by dewatering pumps inclusive of all consumeables diesel, oil, petrol and lubricants etc., and disposal of water In all types of soils.
480
23040
48
... More
Manufacturing, Transporting & Stacking at worksite of 610mm dia (OD) x 10 mm thick MS Pipes (Fe 410 Grade) conforming to IS 3589 - 2001.
80
639920
7999
... More
Installation of 610 mm dia (OD) x 10 mm thick MS product pipe by pipe ramming method including making of entry and exit pits all related civil works like excavation, shoring/strutting etc., and restoration of site after completion.
In Soft soil :
80
2577200
32215
... More
Construction of D.G.ROOM (Size 6.0M X 6.0M) at Wet Well
Earth work in excavation for foundations of structures by Mechanical means as per drawing and technical specification, including setting out,construction of shoring, strutting, barricading, danger lighting, bracing, removal of stumps and other deleterious matter,dressing of sides and levelling the bottom of trench to the extent required, utilising the available excavated earth locally for the work etc complete with all lead and lift as directed by the Engineer in Charge. -do- Ordinary / all soil / hard soil 0-3 mtr depth
45.68
3974
87
... More
-do- Ordinary rock comprising of lime stone,sand stone,hard laterite,fissured rock,conglomerate or other soft or disintegrated rock which may be querried or split with crow bars. Boulders which do not require blasting having max. dia in any direction of more than 300mm: found lying loose on the surface or embedded in river bed,soil,talus,slope wash and terrace material of dissimilar origin with all lead & lift as directed by the Engineer in Charge. 0-3 mtr depth
27.41
3179
116
... More
-do- Hard rock- Any rock excavation by using mechanical plant / machinery. 0-3 mtr depth
18.27
12368
677
... More
Providing and laying in position plain cement concrete of mix 1:3:6 with OPC @220kg, with 40mm and down size graded granite metal coarse aggregates @ 0.892cum and fine aggregates @0.465cum, machine mixed, concrete laid in layers not exceeding 15 cms thick, well compacted, in foundation, including cost of all materials, labour, HOM curing complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
8.73
46103
5281
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC @320Kg with 20 mm and down size graded granite metal corse aggregates @ 0.69cum and fine aggregate @ 0.46cum, with super plasticisers at 3ltr confirming to IS 9103-1999 reafirmed -2008, machine mixed concrete laid in layers not exceeding 15cm thick, vibrated for all works in foundation plinth for footing, pedastals, retaining wall, return walls, walls (any thickness) including attached pilasteres, column, pillars, posts, struts, buttresses, bed block, anchor blocks and plinths etc including cost of all materials, labour, HOM curing complete but excluding cost of reinforcement as per specifications with all lead and lifts as directed by Engineer In-Charge.
9.3
53093
5709
... More
Providing and construction granite/trap/ basalt size stone masonry in foundation with cement motrar 1:6 stone hammered dressed in courses not less than 20cms high, bond stone at 2m, apart in each course including cost of materials, labour, curing complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
19.62
94450
4814
... More
Providings and laying in position plain cement concrete of mix 1:2.4 with OPC @ 240Kgs, with 20mm and down size graded granite metal coarse aggregate @0.878cum, and fine aggregates @ 0.53cum, machine mixed, concrete laid in layers not exceedings 15 cms thick, well compacted in foundation plinth and cills including cost of all materials,labour, HOM curing, complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
1.5
8287
5525
... More
Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 5.0 Newton per sqmm with cement mortar 1:4 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications with all lead & lift as directed by the Engineer in Charge.
19.83
137084
6913
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC @ 320Kg, with 20 mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.460 cum with super plasticisers @ 3litres conforming to IS 9103-1999 reafirmed -2008, machine mixed, concrete laid in layers not exceeding 15cm thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels and beams, retaining walls, return walls, walls(any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM curing complete but excluding cost of reinforcement as per specifications with all lead and lift as directed by the Engineer in charge.
19.3
114680
5942
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC @ 24 Kgs, with 12mm and down size graded granite metal course aggregates @ 0.05175 cum and fine agreegates @ 0.0345 cum with super plasticisers @ 0.225 ltrs, machine mixed, well compacted for plain chajja of 7.5cms average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete but excluding cost of reinforcement complete as per specification with all lead and lift as directed by the Engineer-in-charge.
7.18
3187
444
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, posts and strutts, square / rechangular / polygonal in plan including cost of material labour complete as per specifications with all lead and lift as directed by the Engineer-in-charge.
44.77
20415
456
... More
Providing and removing, centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings cantiliver girders, bressumers and lintles not execeeding 1 Mtr. in depth including cost of all materials, labour complete as per specifications with all lead and lifts as directed by the Engineer-in-charge.
63.96
18676
292
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm including cost of all materials, labour complete as per Specification with all lead and lifts as directed by the Engineer-in-charge.
45.7
19879
435
... More
Supplying and fabricating TMT steel bars of all sizes for reinforcements of RCC works including conveying steel to work spot including cleaning, straightening, bending, fabricating, placing in position and tying as per design including cost of binding wire, hoisting etc. complete as per specifications with all lead and lift as directed by the Engineer-in-Charge.
2.86
157574
55096
... More
Filling available excavated earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering including cost of all labour complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
48.46
9740
201
... More
Providing and fixing pull and push type rolling shutters of approved make out of 18 gauge, 75mm wide cold rolled steel lathes of convex corrugations, with side guides and bottom rails with interlocking arrangements for steel lathes by means of alternate clips suspension shaft with high tension coil type springs, two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside and outside locking with push and pull operations complete including pulling hooks, 4 Nos. handles with all fittings and accessories, painted with a coat of red lead paint (Without top cover) cost of materials, labour HOM complete with all lead and lift as directed by the Engineer-in-charge.
5
13035
2607
... More
Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting, materials, labour, HOM complete as per specifications with all lead and lift as directed by the Engineer-in-charge.
2.5
1205
482
... More
Providing and fixing in position in cement concrete 1:3:6 steel glazed windows and ventilators side hung / top hung fully openable as per approved drawings using Z angles of 25x33x3mm. weighing 1.419 kg/m both for outer and inner frames and central mullion section of size 25x46x3 mm weighing 2.28 kg/m duly providing T-section 19x19x3 mm weighing 0.839 kg/m for glazing of windows not more than 34 cms. c to c including providing and fixing 4 mm thick reeded glass with teak wood beading of required size, all steel sections should conform to IS 7452:1990, 4 Nos. of hold fasts of approved size, section should be cut to length welded and electrically grinded subdividing frames of unit shall be tenonned and revetted into the frames electrically. All the steel surface shall be throughly cleaned free of rust and painted with one coat of anti-corrosive paint and finishing with two coats of ready mix paint of approved colour and make including cost of materials, fixtures, labour and HOM, complete with all lead and lift as directed by the Engineer-in-charge.
7.2
28173
3913
... More
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20cms c/c both horizontally and vertically fixed chicken mesh for drop chajja, ficia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM, curing, complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
1.83
1950
1066
... More
Providing 12 mm thick cement plaster in single cost with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
83.8
17011
203
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : including providing and removing scaffolding, cost of materials, labour, curing etc complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
40.14
9392
234
... More
Providing 18 mm thick cement plaster in single coat with cement mortar 1:3 to brick masonry including rounding off corners, wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
115.71
31704
274
... More
Providing raised and cut pointing 20mm deep to coursed stone masonry with cement mortar 1:3, after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
36
7452
207
... More
Flooring with 20mm thick polished shahabad slabs using cement mortor 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, including cost of materials, labour, curing, polishing complete as per specifications with all lead and lifts as directed by Engineer In-Charge.
36
49608
1378
... More
Providing and applying two coats with Oil bound washable distemper of approved shade on wall surface including priming coat with distemper primer after thoroughly brooming the surface free from mortor drops and other foreign matter including preparing the surface even and sand paper smooth,cost of materials, labour,complete as per specifications with all lead and lift as directed by the Engineer-in-Charge.
119.8
13178
110
... More
Providing and finishing external walls in two coats with water proof cement paint of approved shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from morter drops and other foreign matter cost of materials, labour, complete as per specifications with primer with all lead and lift as directed by the Engineer-in-Charge.
115.71
11802
102
... More
Providing and applying enamel metal paint two coats ( excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, etc., complete as per specifications with all lead and lift as directed by the Engineer-in-Charge.
10.75
1021
95
... More
SUB TOTAL PART - A
-
44593823
-
... More
Supply, Erection, Electrification, Testing & Commissioning of 3HP or Suitable HP Non-Clog Sewage Pumps along with accessories including DG Set at Wetwell.
3HP or SUITABLE HP NON-CLOG SEWAGE PUMPSETS . 'PUMPSETS: Supply and delivery at site brand new sludge submersible pump coupled to squirrel cage induction motor of suitable HP 'F' class insulation for the specified discharge and head mentioned below. The pumpset should operate in full range of discharge and should have the following accessories specified in the following detailed specification. the submersible sewage pump shall be monoblock type with non-clong design. The pumps should be able to pass through soft solids of 100 mm dia and capable of delivering sludge with specific gravity of 1.05, impellers should be single/double Vane non-clog type of CF 8M material and with wearing rings. The pump should be fitted with contra block cutting and tearing system with special grooving system and suction side for disposal of soft solid materials like long fiber, plastics, solid admixes, sludge etc. Maintenance free, antifriction, deep groove permanently grease filled ball bearings to take care of all the axial and radial forces at any point of operations, should be provided.
3
201000
67000
... More
The pump design should be such as to facilitate automatic installation / removal of pump without having to enter into the sewage pit. Profile gasket should be provided in automatic coupling system to avoid metal to metal contact between the pump and delivery pipe to ensure leak proof joint. The cooling jacket shall be provided inthe pump to reduce the dead sewage volume in the sump. The mono-rail trolly and chain pully block shall be provided and available at all times during the operation of the pump to ensure quick installation and removal whenever required. Material of construction:1) PUMP CASING: The pump casing shall be CI as per IS:210 GRFG 260 With 2 to 3% Nickel. The casing shall have central line discharge. 2) IMPELLER: The impeller shall be of stainless steel grade CF 8M, single/double vane non-clog design additionally a special contra block cutting and tearing system for disposal of material. 3) PUMP SHAFT: The pump shaft shall be hard chrome plate alloy steel of stainless steel SS/410 as per the manufacturers standard and shall be of one piece construction. 4) PUMP BEARING: The pump bearing shall be of antifriction type. The bearings shall be able to take normal thrust loads due to unbalanced hydralic loads on the impellers plus the weight of all the rotating parts of the pump. The pump bearings shall be designed with minimum life of 40,000 hours. The bearing shall be grease lubricated.
-
-
-
... More
5) GUIDE RAIL SYSTEM: The assembly shall have pedestal bracket, delivery bend, C.I guide rail pipe of suitable size of class 'C' upper guide rail holder etc., pedestal and bracket shall provide automatic coupling between pump delivery and flange and discharge bend (standard bend or Duck bend).
6) Moisure sensor(seal moistor) shall be provided in chamber to detect the failure of the mechanical seal. The sensor will trip of moisture into the oil chamber.
MECHANICAL SEAL: Double mechnaical seal shall be provided to prevent pumped liquid entering into the motor winding. The seal shall be situated in oil chamber to ensure proper lubrication. The face combination of lower mechanical seal shall be silicon carbide v/s silicon carbide and upper mechanical seal shall be carbon v/s chrome steel. 7) LIFTING CHAIN: Each pump shall be provided with carbon steel lifting chain of adequate strength. The chain shall have rings of same size as chain fixed at an interval of about 1 mtr for engaging the hook of the chain pulley block. 8) DUCK FOOT BEND: Suitable size heavy duty duck foot bend shold be bolted to the foundation of the pit by expansion bolt. The elbow should have grove to locate guide wire(chain) an the profile of the pump side flange should match with the pump. The elbow should be designed to take over the load of the pump. 9) PROFILE GASKET (Dismandling joint): Flexible pressure tightened automatic connection between pump and duck foot bend should be provided.
-
-
-
... More
10) SUBMERSIBLE MOTOR CABLE: Submersible cable both for power and control shall be terminated in the pump starter panel or in the weather proof junction box if pump starter panel is situated beyond the length of the submersible cable. 11) FASTERNERS: Shall be in MS/GLUD.
12) Seals shall be silicon carbid v/s siliconcarbide and upper machanical seal shall be carbon v/s chrome steel.
13) Pump shall be painted with approved polymer/epoxy . 14 ) pump accessories such as MS guide rail system, guide pipe , auto coupling, PMU etc shall be supplied
MOTOR: The submersible motor shall be dry, squirrel cage type suitable for 3 phase, 50 cycles, 415 volts AC supply complete confirming to ISS:325/1976 shall be of such capacity to provide under working site condition at power which is 10% more than the maximum power required by the pump. Continuous duty with class 'F' insulation. Winding of the motor shall be impregnated by resin. Motor shall have integral cable entry port better starting torque characteristics. The enclosure for motor shall be IP-68. Each phase of the motor provided with thermic switches of Bi-metalic electro-mechanical temperature detectors. The motor shall operate satisfactorily at all operating levels in wetwell. The motor shall be sealed against entry of liquid being pumped by using two mechanical seals.
Motor pump should have the following in built protection connections. 1) Thermistors protection connection against over heating of motor by thermister embedded in each phase.
-
-
-
... More
2) Sensor monitor protection connection against entry of liquid in the oil chamber by the moisture sensor provided inside the oil chamber.
3) Reverse rotation protectionconnection device which trips the motor in case of reverse rotation due to wrong electrical connection
4) Liquid level controller to facilitate auto operation and prevent dry running of pumps. The pump unit should be preferably supplied with Ball type non-return valve, the pumpset shall be supplied along with automatic coupling bend 6 mtr and lifting chain with shakles and guide pipes bar wire of adequate length with extra tough water proof PVC sheathed water proof submersible cable of suitable capacity copper cable. Note: 1) Motor offered shall be of such capacity to provide the maximum power requirement of impeller of the pump including transmission, shaft losses with a 20% margin in the capacity of the motor when only one pump is operated in the sytem.
2) The motor shall be suitable for required output when line voltage variation is +/ - 10% and frequency variationof +/- 3% in any combinationof these voltage and frequency variation.
3) The motor should be capable of providing the required output at an ambient air temperature of 45 degree centigrade.
4) The shaft head of the pump offered shold be minimum 110% and maximum 130% of the specified head. The loading for low efficient pump will be done based on each excess power consumed by over a period of 15 years when compared to the best efficient pump
-
-
-
... More
5) The KUWS&DB reserves the right to select any of stipulated make of pump and motor, as such tenderer should be prepared to provide any of the stipulated makes pump and motor selected by the KUWS&DB.
6) The material test certificate and manufacturer's test certificate for pump and motor should be submitted to central office/circle office for clearnance before dispatch.
Note: Submersible pumpset shold be installed in the sump and will be submerged with sludge. Hence, the pumpset should suit the above system.
DUTY OF PUMPSETS:
Discharge - 3 LPS against total head of 17 Mtrs." 3 HP or suitable HP
-
-
-
... More
Supply, delivery to work site, loading, unloading, stacking and fixing of resilient seated soft sealing Sluice valves with body, bonnet of ductile iron of minimum grade GGG 40/50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face dimensions as per BS 5163-89 / IS 14846-2000/ DIN 3202 F4/F5. The stem sealing should be with toroidal sealing rings (minimum 2 'O' rings) All the valves should be with electrostatic powder coating both inside and outside with pocket less body passage . The valves shall be supplied with suitable size galvanized bolts and nuts of required numbers, etc complete with all lead and lifts as directed by the Engineer in Charge 100 mm dia PN 10
3
32514
10838
... More
NON-RETURN VALVE: Supply and delivery at site brand new, cast steel Dual plate check valve for handling water containing fibrous materials and solids of 100 mm suitable for effective sewage application.
100mm dia Class 150
3
13560
4520
... More
Delivery pipes and specials: Supply and delivery at site brand new best indigineous double flanged mild steel pipes and specials. Suitable for test pressure equivalent to twice the working pressure. The pipe shall be quoted with aproved make and standard Polymer paint inside and outside to resist sewage action. Welded joints should be tested as per IS 3589/1996. The thickness of flanges should confirm to IS for minimum flow pump.
Upto 500 mm dia suitable size reducers, enlargers, tee , bends , flanges etc
250
40750
163
... More
-do- 100 mm or suitable dia MS Double flanged pipes
30
60000
2000
... More
PRESSURE GAUGE: Supply and delivery at site brand new KUWS&DB approved make suitable dia sealed precision tube glycerine filled stainless steel pressure guage with stop cock, two way cock, nipple and required length of copper tube etc., complete suitable for counting onthe delivery of the above pump.
3
4500
1500
... More
Control panel board with starter units: Supply and delivery at site brand new reputed make floor mounting, free standing, cubicle type control panel suitable for operation on 3 phase 50 cycles 380/440 volts AC supply fitted with the following: 'Non-Draw out panel mounting manual operated trip free operating mechanism sheet steel clad suitable amps and 63 A or suiatble rating rating MCCB 25KA with fixed and moving contracts fitted with U/V release, shunt release and with suitable thermal release.-1 No Phase indicating lamps with switches of Reputed make - 1 set 'MS air insulated bus bar chamber with 5 Nos. 32 -45 Amps or Suitable Amps 5 MVA Air insulated bus bar made of high conductivity, high strength aluminium alloy complying with the requirements of grade E91 E of IS 5082, suitably braced with non-hygrosco-pic SMS supports. Provision shall be made in the bus bar chamber for one incoming and 7 outgoing feeders. The bus bar chamber should be of adequate capacity to handle the incoming and out-going cables and for fixing the switchgears as per requirement- 1 No.
Multi parameter such as current, kwhr,Voltage, KVA Reading digital meter Reputed make - 1 No.factor/Energy meter Reputed make- 1 No.
Cable entries and terminals suitable for numbers, type and size of aluminium conductor power cables, etc- 1 set '32 A or suitable Amps heavy duty triple pole fuse switch mounted on common chasis, complete with handle assembly door interlock and pad locking
1
27500
27500
... More
arrangement with mechanical linkage shorting links and suiatble Amps capacity HRC fuses insuiatble or suiatble rating MCCB of repuated make conforming to the latest ISS 4064 of Controls and switchegear make- 3 No.( For 3 HP / suiatble HP -3 no , ) 1KVAR -3 no capcaitor of heavy duty shall be cnnced across motors for power factor improvement with suiatble rating MCB for each capacitor unit 32 A Amps DP load break heavy duty switch fuse unit with rewireable fuses in sheet metal enclosure conforming to the latest ISS 4064m or suiatble rating MCB 16 Amps for lighting circuit reputed make- 1 No. & DOL starter with overload relay, single phase protection, indicating lamps, ammeter etc upto 7.5 HP -3 no
NOTE: 1) The panel board shall be complete with all other required fittings, and shall be fabricated using 2 mm thick sheet steel and suitable size copper cable/copper wire painted with two coats of a highly corrosion resistant primer applied wet on wet and a finishing coat of synthetic enamel paint of the ash greay shade. 2) The internal wiring shall be done using adequate size insulated electrotinned copper strip or cable of 1.1 KV grade. 3) Manufacturers test certificate is to be furnished to E.E. before dispatching the materials to the work site. If any discrepancies are noticed apart from tender specification, suitable action as per tender condition will be taken against the tenderer including black listing of the tenderer. 4) The bus bar chamber should be adequate size to accomadate all incoming, outgoing cable and required switchgear.
-
-
-
... More
The pump shall be controlled by the automatic liquid level controller while the pumps run in auto mode. The electrodes shall be fixed in the wetwell and the connection from the electrode shall be made to the individual control panel through the cable duct.
-
-
-
... More
Laying of main side cable.
In new trenches: The work shall include digging on trench 0.5 x 0.6 m deep laying in the trench, refilling and consolidating the soil. 3.5x16 sqmm
25
1741
69.64
... More
Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 100 mm 3.5x16 sqmm
5
1540
308.04
... More
Main side & load side CABLE: Supply and delivery at site brand Reputed make Aluminium standard conductors PVC insulated, sheathed steel tape/wire armoured, PVC outer sheated 1.1 KV class UG cable conforming to the latest ISS 1554. 'a) 4C x16 sqmm .
50
6268
125.36
... More
b) '-do- for motor PVC 3 core flat sheathed submerisble copper cable 3Cx2.5sqmm
30
2033
67.77
... More
Erection of 3 Nos of pumpsets of suitable capacities: Laying and jointing of pipes and specials, lowering of pumpset into the wetwell and jointing delivery pipes guide rail system MS chains and lowering into the wetwell upto the floor level, laying, jointing specials, valves, guages and delivery manifold etc ., complete using bolts and nuts , packing, fixing clamps, providing pipe supports, thrust blocks in CC 1:2:4 proportion wherever necessary including making holes in pumphouse walls, packing with CC after laying pipes i.e., complete.
1
7500
7500
... More
Laying and jointing of CI/MS pipes and specials for suction and delivery connections of the pumps-3 nos using suitable size bolts, nuts packing etc., complete including fixing foot valve, all types of valves, gauges, strainers, delivery and suction manifold. The work shall include providng pipe supports, thrusts block in CC 1:2:4 prop., wherever necessary upto the end of the delivery manifold, using all the required materials such as sand, cement jelly including making holes in sump, pump house for laying suction and delivery pipes, packing of holes with CC 1:2:4 etc., complete.
1
4500
4500
... More
Laying of main side Running the cable in exisiting ducts including properly securing cable in position etc., complete using all the required materials etc., complete. 'd) 4 x 16 sqmm .
30
289
9.64
... More
Cable terminations: Termination of cable using Alluminium/Copper lugs to the terminal end for solderless crimping to aluminimum conductors by adopting crimping tool.
'd) 4 x 16 sqmm .
6
60
10.1
... More
Earthing : - Providing earthing as per IS 3043, and the work shall include the following
Supply and providing, earthikng electrodes comprising of GI pipes 40 mm dia 2.9 mm thick 2.5 mtrs long, the pipe shal have 16 through holes of 12 mm dia staggered along the length of the pipe as per ISS suitable length 19 mm dia GI pipe provided with mesh covered funnel GI bolts, nuts washers, check nuts, at one end and coupled to main electrodes through a 40 mm x 19 mm GI conduct at the other end.
Digging 300 mm dia earthing pits to suitable depth for buring the main electrodes in the pit. The pit shall be filled with alternate layers of salt and charcoal 150 mm thick around the pipe to the entire depth.
An inspection chamber of 300 x 300 x 300 mm size shall be constructed with CC 1:3:6 prop., 150 mm thick for sides and 100 mm thick at botton. The chamber shall be provided with CI/MS cover hinged to the frame.
The electrical equipment shall be connected to the earth pipe through 25 mm x 11 mm size pure electrolytic copper strip or 25 x 6 mm size GI strip for equipment earthing (approximate length 60 mtrs).
4
15417
3854.46
... More
Erection of control panel: Erection of control panel board on CC foundation including formation of CC foundationin CC 1:2:4 proportionate using all the required materials such as cement, jelly etc., complete including erectrion of the panel board, on CC foundation using required materials such as MS channel, bolts,nuts, washers etc., complete including Star delta Starter - 3 Nos. 1 No. Complete as detailed above suitable for 30 HP to 7.5 HP pumps operationat wet well 1
1
3500
3500
... More
Servicing and commissioning: The pumpsets (3 Nos) along with all other electrical equipments shall be serviced and commissioned in the presence of the Engineer-in-Charge of work including trial running for a period of 90 days. The work shall include the following servicing and heat running of the pumpsets along with allied equipments.
Calibration of switch gears relays and meters giving performance tests of all electrical equipments.
Giving performance tests of the pumps such as discharge, efficiency and the power absorption etc.
Providing operation and maintenance manuals of the pumps and allied equipments to the operating personnel. Giving trial run of the pumpsets for a period of 90 days from the date of successfull commissioning.
The contractor should employ peronnel to operate and maintain the pumpset and accessories during the trial run period and should train the KUWS&DB staff to operate the pumpsets.
Note: 1) The energy and water will be provided by the KUWS&DB free of cost.
2) The pumpsets along with all the electrical equipments shall be commissioned only when the performance of switch gears, relays are wittnessed by the Executive Engineer incharge of the work KUWS&DB and certified regarding the performance of relays/switch gears.
1
15000
15000
... More
Fire Fighting Equipment a) Supply and installation of CO2 type fire extinguisher 2 Kg capacity with initial charge with wall mounting bracket, ready for use (TS 2678) - 2 Nos.
b) Supplying and fixing of first aid box comprising of the standard medicines to be provided in the first aid box to give first aid treatment - 1 No.
c) Providing shock treatment chart on wall with inside plastic sheet cover and ply wood backplate frame work complete.
d) Supply one set of fire buckets (4 Nos) with round bottom made of GI sheets 24 SWG 9 ltrs. capacity painted inside white and outside red with a word `fire' on the face of the bucket along with stand to hang the buckets.
e) Supplying rubber mats tested to 22KV with ISI mark grooved, of size 6'x3'x1/2" - 2 Nos.
f) Supplying rubber gloves, electrical quality, tested to 22KV - 1 Pair
g) Supplying and fixing of Danger/No Admission/No Smoking Board made out of MS sheet metal with two coats of non-corrosive enamelled paint - 10Nos
1
13392
13392.86
... More
DIESEL GENERATING SET WITH AMF PANEL
Supplying and erection, testing and commissioning of suitable capacity Diesel Generating Set on existing CC platform Comprising of Diesel Engine Developing ….. BHP @ 1500 RPM conforming to BS 5514. The engine should be turbocharged, Air/water cooled with 10% over load for 1hour in every 12 hours of operation coupled to suitable capacity alternator rated at 415V, 0.8 PF (lag) 50Hz, 3phase, 4 wire system, conforming to BS 5000/IS 4722. The alternator shall be of breshless type, screen protected, revolving field, Mounted on suitable channel Iron Base frame, complete with suitable capaity Fuel tank, required number of Batteries of 12/24V as per requirment, Accoustinc enclosure as per CPCB Approved Norms.
Supply, erection, testing and commissioning of AMF panel suitable above capcity DG set. The panel is of cubicle type base / floor mounitng control panel with hinged doors, undrilled bottom gland plate of suitable capacity aluminuim bus bar with accomodation for 2 pole contactor and 4 pole MCCB for alternator with terminal O/L relay, 3 pole contactor and 4 pole MCCB for mains, HRC fuse/MCB for short circuit protection, Microprocessor based AMF module with supply failure timer. Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ...capacity bypass switch and frequency sensing, PCC 1301 controleer with water temparature/lube oil pressure/engine speed, fails to start, low oil pressure, High engine temparature, under over voltage, over current, earth fault relay with indications for Mains on, load on mains, Battery charger on Push buttons AMF module by pass mode, Battery charger unit with inbuilt Auto/manual and flot/Boost facility.
30 KVA Capacity.
1
425000
425000
... More
LT Cable Providing of LT UG cable having aluminium conductur PVC insulated. Sheated. Steel wire / steel tap armoured cable with PCV outer sheating 1.1 KV class Class A PVC cable. '3 ½ x 25 sqmm
50
7393
147.86
... More
LT Cable Terminations
Supplying and fixing tinned aluminium lugs and crimping and fixing to terminal points for wires of the following sizes including all accessories such as cable glands of proper sizes etc complete as directed by the Engineer. for 25 sqmm
8
147
18.38
... More
a) Labour charges for laying of 1.1 KV class LT UG cable when supplied agency in existing trench / GI pipe / stoneware pipe / on wall / on pole as required. '3 ½ x 25 sqmm
50
482
9.64
... More
Tool Kit: Supply and delivery at site best Taparia/pr any other Reputed make and other reputed make tool sets for operation and maintenance of the above pumpsets comprising of the following. a) Double end spanner 1/4" to 1" 1 set b) Screw driver insulated 11" - 1 No c) Screw driver insulated 8" - 1 No d) Cutting plier insulated 8" - 1 No e) Hammer with handle 1 Kg - 1 No f) Pipe wrench 24" 1 No g) Pipe wrench 18" 1 No h) Pipe wrench 12" 1 No i) Hammer with handle 5Kgs- 1 No j) Grease gun - 1 No k) Ring spanners 1/4" to 1" - 1 set l) Tongue tester-1No m) Multimeter-1No. n) Megger-500v of MECO or any other approved make-1No.
1
11160
11160.71
... More
Anti-vibration mounts:- Supply and installing of heavy duty anti-vibration mounts/ pads below the Generator etc., complete with all lead and lift, as per approved design and specifications and as per the instructions of the engineer in -charge.
10
892
89.29
... More
EARTHING. Supplying fixing & wiring earth electrode for grounding of lifts, Dgsets etc using 40mm dia 2.9 mm thick 2.5 mtr long GI pipe with GI funnel with mesh & suiatble size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm di & the electrode should be covered 150 mm alround with alternate layers of salt & charcoal from the bottom of the CC Chamber. The connection from the electrode is to be estibalised through GI strip using GI bolts & nuts .
1
3854
3854.46
... More
ERECTION & INSTALLATION WORKS - Supply and installation of the following items including all necessary accessories, scaffolding, etc, complete with all lead and lift, as per approved design and specifications and as per the instructions of the engineer M.S.Exhaust pipe 75mm / 100mm/ 125mm Dia complete with M.S supports.
5
6696
1339.29
... More
Supplying & Laying 6C X 1.5 sq mm copper control cable from engine to control panel
25
3446
137.86
... More
Elecrification to Wetwell & DG Room
Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, juction boxes,adhesive paste etc, and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering dameged portion using heavy guage sddles at an interval of 700mm using NF screws
100
6160
61.6
... More
Supplying and wiring adopting loop system in existing PVC Conduit/Casing Caping using Copper PVC insulated multi strand 2X1.5 Sq.mm copper wire with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose lenght in a wood/PVC round block complete for each outlet. -do- Short point up to 3 mtr from tapping point to out let vai switch
15
2296
153.12
... More
-do- Medium point above 3 mtrs up to 6 mtrs from tapping point to out let vai switch
15
3234
215.6
... More
-do- Long point above 6 mtrs up to 10 mtrs from tapping point to out let vai switch
4
1277
319.44
... More
Supplying and flush mounting 12''x12''x3'' teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, necessary massonary patch work complete.
2
204
102.08
... More
-do- 8"x6"x3"(203x152x76mm)
6
385
64.24
... More
-do- 4"x4"x3"(101x101x76mm)
6
359
59.84
... More
Supplying and fixing of bakelite DP/Socket/Switch with/ Without neon indicator electronic stepped regulator over existing wood board of flush mounting in plastic plates/nitches, as per IS 1293 & IS 3854 -do- 32 Amps Flush/projected type DP switch
5
822
164.56
... More
-do- 16 Combined switch & socket with indication
5
853
170.72
... More
Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate. IS 3854 &IS 1293 -do- 6 Amps One way Switch
5
277
55.44
... More
-do- 6 Amps 3 way Socket
5
418
83.6
... More
Supplying and fixing PBBC/bakelite straight or slant batten holder and wiring with 60 w/230 volt lamps
2
154
77.44
... More
Supllying and fixing of cast Aluminium round or oblong type bulk head fitting with GI wire guard, glass cover with 15 Watts 230 Volts CFL as required.
2
1675
837.76
... More
Supplying patti type flourecent tube light fitting of 4'-36/40 watts flourecent tube fitting. Made out of MS sheet and stove enamelled with low loss open construction copper wound ferromagnetic ballast, starter, locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230V AC supply including 1No 4'-36/40watts flouresent tube.
15
8820
588
... More
Fixing of all types of capacities of fluorecent/false ceiling/spot light/CFL fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076 twin twisted wires PVC insulated wires required Nos of round blocks and clamps.
15
1293
86.24
... More
LED Street light 24 Watts.Supply of LED Streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with Injection moulded & is made of polycarbonate material with high transmission index, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminare IK08. Power Factor 0.9 with mains Current should not be greater than 0.1A to 0.7A & Surge Protection- Min 4KV along with Over voltage/Overload, short circuit/ miswiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Over load & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency130lm/w at 1W & Fixture Efficiency 80lm/w with nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 5 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED source manufacture. Suitable for B1/B2 Roads as per IS 1944 Part I & Part II.
10
60825
6082.56
... More
Supplying and fixing of 25mm dia GI pipe bracket up to 2 mtr long bent at suitable angle and fixing to this bracket 1x40/2x40 watts flourecent tube street light fitting of all capacities to GI or CI or RCC pole / wall using suitable clamp, bolts and nuts and wiring suitable capacity wires complete. PWD ELE SR 2014-15 P-114 SI NO-17.1 Using 25mm dia GI pipe
10
7260
726
... More
Supplying and fixing of Single Pole MCB
8
1372
171.6
... More
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A. -do- 1.5 sqmm
150
2455
16.37
... More
-do- 2.5 sqmm
150
3855
25.7
... More
Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as per IS 1293
8
1203
150.48
... More
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws
80
17
0.22
... More
Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A. -do- 2 core 10 sqmm
30
2312
77.09
... More
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.& Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct -do- 10 sqmm
30
2344
78.14
... More
Earthing: Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 122 mm dia
4
9599
2399.76
... More
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers -do- 16 Amps
4
422
105.6
... More
-do- 32 Amps
4
633
158.4
... More
SUB TOTAL PART - B
-
1030674
-
... More
O & M for the proposed sewer system during 60months including 12 month defect liability period after successfull commissioning of UGD system to Shri Biluru Gurubasava colony in Bagalkot city,which includes quality management using specialised techniques & personnel, billing etc., including man power, etc., The minimum supervisory staff with 5 years of experience shall include; ITI qualified plumber/Fitter/Electrician - 4 Nos and Semi skilled labours-1 No, etc., complete with all lead and lift as directed by the Engineer in charge. (For Detailed specicifation refer Section -7: Special Specifications)
-
-
-
... More
-Do- During first year operation & maintenance i.e, during defect liability perod
12
704724
58727
... More
-Do- During Second year operation & maintenance
12
739968
61664
... More
-Do- During Third year operation & maintenance
12
776964
64747
... More
-Do- During Fourth year operation & maintenance
12
815808
67984
... More
-Do- During Fifth year operation & maintenance
12
856596
71383
... More
O & M for the proposed sewer system after defect liability period which includes and quality management using specialised techniques & personnel provided in the above item, repairs in the Sewer network of 4.46km, Wetwell-1No, Pumping machineries, Rising main-2 km and allied works created under this tender etc. This is event oriented item and payment will be paid as and when the repair works taken up duly obtaining approval from the competent authority. However, the payment will be made upto the amount quoted in the tender. (For detailed specicifation refer section -7: special specification)
-
-
-
... More
-Do- During Second year operation & maintenance
12
296280
24690
... More
-Do- During Third year operation & maintenance
12
311100
25925
... More
-Do- During Fourth year operation & maintenance
12
326652
27221
... More
-Do- During Fifth year operation & maintenance
12
342984
28582
... More
Supplying Smart phone mobile handsets of Board approved make including latest android system, 8 GB memory card, GPRS, EDGE, Blue tooth, camera, Li-ion 2300 mAh battery and sim card with all lead and lift as directed by the Engineer-in-charge.
1
6000
6000
... More
SUB TOTAL PART - C
-
5177076
-
... More
GRAND TOTAL (PART-A+PART-B+PART-C)
-
50801574
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements