Karnataka Exhibition Authority Tender

MRK01 - Providing,Fixing,Erecting Design DETACHABLE OLD WOODEN TYPE MYSORE PALACE FASCIA ( 1st GF 60' 0" LENGHT 20' 0" WIRTH , 54'0" HEIGHT AND FIRST FLOOR 36'0"X 10,0"X 10',0" 2ND FLOOR 22'0" X10,0"X 10'0" 3RD 12'0"X 5'0"X 4'0")SHED MADE OF GLASS REINFORCED PLASTIC / FIBRE REINFORCED PLASTIC /WATER PROOFING PLYWOOD,RAFTER ,WODDEN RIPPER , ASBESTOS SHEET ROOFING, FIBROUS CONNECTIVE TISSUE BINDING TOGETHER , WHITE SURFACE GELCOAT : 25 KGS CATALYST & CO-BOLT 0.2 KG TO 0.25 KGS GRP/FRP APPLY TISSUE MAT FIRST LAYER WITH ISO RESIN FIBER MATT 450 CSM 2 LAYER WITH ISO RESIN CORE MATT 450 CSM 2 LAYER WITH ISO RESIN MOULDING ,CASTING AND DEMOULDING GRP/FRP MATRIAL MUST SPRAYED IN SEVERAL THIN LAYER OF 3 TO 4 MM UNTIL THE REQUIED THICKNESS IS ACHIEVED THE STANDARD THICKNESS IS BETWEEN 10-12MM THE SPRAYED GRP/FRP IS TO BE COMPACTED BY A STEEL AHND ROLLER BEFORE SPAYING THICKNESS THE LAYER .AFTER THE FINAL LAYERS SPRAYED A DEPTH GAUGE OR TEMPLATED IS USED TO CHECK THE TOTAL THICK AND COMPARE TO THE SPECFICATION DESIGN CARACTRISRISTEC TO ACHIVE THE DESIGN SHAPE AND FINISHING THE DESIGN SHAPE AND FIXING OR ERECTING ON IRON BASE AND PLYWOOD PLATFORM, AND FIXING ARTIFICIAL SPECIAL RUBBER BASED GRASS L;AWN WITH SR ADISIVE AND SCREWS ON AND GROUND SHIFTING TO THE SITE , FIXING,ERECTING IN SITE, ELEPHANT AND MAINTENANCE TILL THE END OF EXIBITION PERIOD 90 days of exibition AND HANDED OVER TO KEA AFTER COMPLITION OF EXIBITION (AS PER DESIGN AND PHOTO ENCLOSED) ARCHITECT INSIDE SMALL PILLERS OF PALACE SIZE (2'0" X 2'0" X 8'0") WITH PEDESTAL AND CAPITAL POST DESIGN , ARCHITECT INSIDE SMALL PILLERS OF PALACE SIZE (2'6" X 2'6" X 20'0") WITH PEDESTAL AND CAPITAL POST DESIGN )

Vol-2, P-84, I.No-11.25.2, S.R-2023-24 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

Vol-2, P-48, I.No-8.41, S.R-2023-24 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.