Karnataka Cooperative Milk Producers Federation Limited Tender

code04 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)..Cost is including of GST-18%( PWD SR 2023-24 Volume-2 Page No:- 09 Item No:- 5.1.1)

code05 - Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition .filling in voids with quarry spalls and clean sand etc. complete as per drawing and Technical Specification..Cost is including of GST-18%( PWD SR 2023-24 Volume-3 Page No:- 117 Item No:- 12.40)

code06 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost is inclusive of formwork ) Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates .Cost is including of GST-18%( PWD SR 2023-24 Page No:-15 Volume-1 Item No:-2.1.4)

code07 - Providing & constructing Laterite stone masonry including labour cost and conveyance of materials curing etc complete as per specifications. I.S. 3620/1979 having compressive strength not less then 3.5N/mm2 FOR SUPER STRUCTURE in C.M:1:6 (cement 45 kgs/m3).work including flush pointing of the surface with neat cement mortar .Cost is including of GST-18%

code08 - Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry &concrete surface including rounding off corners wherever required smooth rendering, providing & removing scaffolding including cost of materials,labour ,curing complete as per specifications..Cost is including of GST-18%.

code09 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. FOR TOP Roof 25% of transperant sheets are used and remaining 75% galvanised iron profile sheet.For side covering transperant sheets are used . Cost is including of GST-18%.( PWD SR 2023-24 Volume-2 Page No:- 26 Item No:-7.38)

code10 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and one coat of enamel metal paint including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge..Cost is including of GST-18% ( PWD SR 2023-24 Volume-2 Page No:- 81 Item No:-11.16.1)

code11 - Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth).Cost is including of GST-18% ( PWD SR 2023-24 Volume-2 Page No:- 27 Item No:-7.39.6)

code12 - Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter.Cost is including of GST-18% ( PWD SR 2023-24 Volume-2 Page No:- 125 Item No:-13.48)

code13 - Lift charge of crane for Lifting of Truss .Cost is including of GST-18%