Karnataka Cooperative Milk Producers Federation Limited Tender

BPT01 - Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 19mm thick vinyl bonded water proof block board, shutters all round ward robe, lockable drawers with sliding channels, cupboard drapery hangers, curtain rods with end brackets, openable shutters with 19mm x 6mm thick plain teak wood beading, lipping 1.5mm thick commercial ply vertical support finished in approved 1.5mm lamination sheet of approved colour, shade and quality on all exposed surfaces. Inner surface painted with 2 coats of white synthetic enamel paint over 2 coats of Patti, one coat of wood primer, including cost of brass fittings, parliamentary hinges, C handles, tower bolts, magnetic catches, approved brand lock, adhesives, synthetic resins, nails, screws etc., complete including cost of all materials, labour charges, complete as per specification. complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work(P.No.324, I.No. 39.3 of PWD SR 2018-19)

BPT02 - Providing and fixing CUBICLE WORKSTATIONS consisting of wings made out of 75 mm thick MS CRCA powder coated,tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm W) and one soft board (600 mm W) per workstation, Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway- one middle raceway (600mm W) below table top per workstation and continous raceway at the skirting level, Wire manager - ABS plastic grommet one number per table,Table top - 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straightedge bound Hardware-MS powder coated corner bkt, cantilever bkt, separator hook on bkt, L bkt and Table joint plate., as per specifications, drawings and as directed by Engineer in charge.

BPT03 - STRAIGHT WORKSTATION (Frame) For computer operators: Providing and fixing STRAIGHT WORKSTATION ( Frame ) consisting of back to back unit made out of 75 mm thick MS CRCA powder coated, tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved color and one writing board (600 mm w) and one soft board ( 600 mm ) per workstation, Bottom tile finish 9 mm thick Laminate tile of approved color, Raceway- one middle raceway ( 600mmW ) below table top per workstation and continuous raceway at the skirting level, Wire manager- ABS plastic grommet one number per table,Table top - 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straightedge bound Hardware-MS powder coated corner bkt,cantilever bkt,separator hook on bkt, L bkt and Table joint plate., as per specifications , drawings and as directed by Engineer in charge Sharing workstation. (P.No. 333, I.No. 39.15 of PWD SR 2018-19).Non Sharing workstation 2D ) Size : 1200 mm x 600mm D x 1200 mm ht. Non Sharing work Edge binding table top, single unit -Postformed table top): single unit complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work)