Karnataka Bhovi Development Corporation Tender

Item04 - Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 10 HP Centrifugal Pumpset (size 80x65 Head 34.50M, Discharge 840 LPM), (PWD Common SR 2023-24, Vol-5 P.no.157, I.No.13.40.9)

Item05 - Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments.amendments. 7.5 to 10 HP centrifugal pump, (PWD Common SR 2023-24, Vol-5 P.no.157 & 158, I.No.13.43.2)

Item06 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area 1x3x6 Sqm as per IS 694-1990 with ISI Mark and as per its latest amendments, (PWD Combined SR 2023-24, Vol-5 P.no.154, I.No.13.22.4)

Item07 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments, Size 80mm,(PWD Combined SR 2023-24, Vol-5 P.no.154, I.No.13.25.3)

Item08 - Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets.(PWD Combined SR 2023-24, Vol-5 P.no.155, I.No.13.25)

Item09 - Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. (PWD Combined SR 2023-24, Vol-5 P.no.155, I.No.13.26)

Item10 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Medium Duty GI pipe: Medium Duty GI pipe of 80mm dia, (PWD Combined SR 2023-24, Vol-5 P.no.127, I.No.11.2.8)

Item11 - Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any. For 80 mm dia GI BEND, (PWD Combined SR 2023-24, Vol-5 P.no.130, I.No.11.8.8)

Item12 - Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any. For 80 mm dia GI hexagonal nipple, (PWD Combined SR 2023-24, Vol-5 P.no.132, I.No.11.14.8)

Item13 - Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments (PWD Common SR 2023-24, Vol-5 P.no.158, I.No.13.47)

Item14 - Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (PWD Common SR 2023-24, Vol-5 P.no.117, I.No.10.9.8)

Item15 - Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments (PWD Common SR 2023-24, Vol-5 P.no.117, I.No.10.10.8)

Item16 - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (PWD Combined SR 2023-24, Vol-5 P.no.156, I.No.13.32)

Item17 - Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work. (PWD Combined SR 2023-24, Vol-5 P.no.156, I.No.13.34)

Item18 - Labour charges for Providing connection using insulated sheathed steel wire cable of size 3 1/2*10 sqmm as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specifications with testing of as per instructions of engineer incharge of work.(PWD Combined SR 2023-24, Vol-5 P.no.156, I.No.13.35.3)

Item19 - Providing, and fixing Pot Heads suitable for 1.1 KV class UG cable of size 3 1/2*10 Sqm filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work.(PWD Combined SR 2023-24, Vol-5 P.no.156, I.No.13.38.2)

Item20 - Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. (PWD Combined SR 2023-24, Vol-5 P.no.157, I.No.13.39)

Item21 - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN10.0,90mm dia (PWD combined SR 2023-24, Vol-5 P.no.95 & 96, I.No.9.3.3)