Jungle Lodges And Resorts Limited Tender

Removing existing MS windows and doors and storing them as per the instructions

Removing existing GI sheets from the roof and storing them as per the instructions

Earthwork in surface excavation in Hard soil for levelling and lowering the ground manually ( other than foundation of buildings, culverts, road drains and trenches of pipe lines and cables ) and removing the excavated stuff to a distance not exceeding 50m and lift upto 1.5m, excavated surface levelled and neatly dressed, disposed earth to be levelled after breaking of clods and neatly dressed as per specifications

Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM curing complete as per specifications.

Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM curing complete as per specifications.

Providing and constructing precast concrete solid block compressive strength not less than 35kg/sqcm with cement ,ortar 1:4 masonry (quoin, jamb, closer blocks) with solid concrete blocks of size 40x20x20cms conforming to I.S:2185/1965 in superstructure including cost of materials,labour charges, scaffolding, curing complete as per specifications

Providing and constructing non load bearing wall with solid concrete blocks of size 400x100x200 mm having block density not lessthan 1800 kg/m3 and having a minimum average compressive strength 4.00 N/mm2 confirming to IS 2185 (Part) : 2005 and constructed with CM 1:4 , as per IS 2572:2005 including cost of all materials, labour charegs, scaffolding, curing complete as per specifications.

Providing and laying inn position reinforced cement concrete of mix 1:1.5:3 (M20) with 20 mm and down size graded granite metal machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for R.C.C beams, columns of all sizes in foundation plinth and superstructure ground floor level for RCC beams including cost of all materials, labour, HOM of machinery, curing, complete as per specifications using vibrator as per specification

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specifications.

Providing 15mm thk rough cement plastering in single coat with cement mortar 1:4, to brick masonry for base of dadoing works with sand of approved quality, providing and removing scaffolding, including cost of materials,labour,curing complete as per specifications

Providing 20mm thk cement plastering in single coat with cement mortar 1:4, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering,: Providing and removing scaffolding, including cost of materials,labour,curing complete with waterproofing compound for external walls as per specifications including providing and mixing waterproofing compound in cement plaster at one kg per bag

Providing and fixing Ceramic tiles of size 300x300mm for flooring, threads, steps and landing, laid on a bed of 20mm thick cement mortar 1:3 mix flush pointing with white cement mixed with matching colour pigment including curing, cleaning etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for equipment, , etc.,

Providing skirting, dado, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( excluding cost of rough plastered surface which should be measured and paid separately) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Specification Colour glazed tiles 30x45 cms 6mm thick

Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of approved make, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special roffe adhesive for flooring and skirting etc., complete including providing spears at required interval and removing stains etc., complete

Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of approved make, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special roffe adhesive for flooring and skirting etc., complete including providing spears at required interval and removing stains etc., complete For Outdoor

Providing TMT steel reinforcement for RCC work including straightening,cutting,bending,hooking,placing in position,lapping and / or welding wherever required,tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps and wastage shall not be measured and paid) cost of materials,labour,HOM of machinery complete as per specifications

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.

Providing and applying painting in two coats with plastic emulsion paint of approved brand with primer on ceiling & walls surface to give an even approved shade after throughly brushing the surface,free from mortar drops and other foreign matter including preraring the surface even and sand paper smooth,cost of materials,labour,complete as per specifications

Providing and fixing engineered wood door frame fabricated using Wood Plastic Composites profiles (WPC) of cross section 75 mm X 125mm with a density of 1250-1300 kg/m3, resistant to water, termite, fungal and UV, using four numbers of L shaped MS or plastic clamps at the corners of the frame to fix it firmly to form a rectangular shape door frame and provided with six numbers of 260mmx25mmx5mm size z shaped MS flat hold fasts for fixing the door frame in the wall and the material and process for manufacturing the door frame confirming to Designs and Specifications including all costs of labour, materials, fabrication, assembling, transportation, erection, incidental and unforeseen charges complete as per the directions of the engineer in charge of the work, but excluding the cost of fixtures and painting

Providing and fixing engineered wood door frame of requires size fabricated using Wood Plastic Composites profiles (WPC) of cross section 55 mm X 110 mm with a density of 1250-1300 kg/m3, resistant to water, termite, fungal and UV, using four numbers of L shaped MS or plastic clamps at the corners of the frame to fix it firmly to form a rectangular shape door frame and provided with six numbers of 260mmx25mmx5mm size z shaped MS flat hold fasts for fixing the door frame in the wall and the material and process for manufacturing the door frame confirming to Designs and Specifications including all costs of labour, materials, fabrication, assembling, transportation, erection, incidental and unforeseen charges complete as per the directions of the engineer in charge of the work, but excluding the cost of fixtures and painting Item no. 38.65 PWD BCSR 2018-19 page no. 319

Providing & fixing of glazed 3 Track - 2 Panel Sliding Windown With Mesh made out of multi chambered uPVC sections with TPv gaskets having isolated drainage and reinforced with GI throughtout the window. the sliding outer frame having a overall size of 108x45 mm with reinforcement of 1 mm thickness, sash with overall size of 39x58 mm with reinforcement of 1.5 mm thickness, mesh sash of overall size 30x48.5 mm reinforced with 1.5 mm of GI. Glazing bead for fixing kof glass shall be of size 20x18mm and coextruded with gasket. Fiber Glass mesh shall be provided in mesh shutter. Windows shall be provided with 5 mm plain float glass, standard hardware and single point locking system of flush lock. Wall thickness of frame, mullion & sash shall be 2-2.2 mm.

Providing & fixing of Top hung Ventilator With Exhaust Fan Provision made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles through out the Windown. the outer frame having a overall size of 60x55 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74x60 mm with reinforcement of 1 mm thickness and Sash with overall size of 75x60 mm with reinforcement of 1.5mm thickness. Glazing bead for fixing of glass shall be of size 34x20 mml coextruded with gasket, Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking and friction stays,. Wall thickness of frame, mullion & sash shall be 2-2.2 mm.

Providing and fabricating and fixing the flush shutter for the toilet door with FRP coating at the back side using 32mm thk 3 layer gurjan flush door and 1.0mm thk FRP sheet for the inside portion and 1.0mm thk laminate for the outside portion including alround teak wood beading finished with polish including all materials, labour, transportation etc., complete

Providing and fixing in position shutters for doors made out of Honne wood styles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 18mm thick of exterior grade plain particle board including cost of materials, labour, HOM of machineries complete as per specifications. ( excluding cost of fixtures )

Providing and fixing following hardware fixtures of approved make and design for door and windows with screws and nails as per the directions a) 150mm long antique finish brass tower bolt

b) 125mm long heavy duty antique finish brass hinges

c) 200mm long antique finish brass handles

d) Antique finish brass aldrops

PROVIDING TRAPEZOIDAL PROFILED SHEET Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses.

Providing and laying thatched roof in slope over existing GI sheet roofing with 200mm thk thatch including all metrials, labour etc., complete

Providing and fixing GI mesh of size 20mm X 20mm fixed over the thach roof fixed tightly with nails including overlapping at the joints, scaffolding, all materials, labour etc., complete

Applying red lead ready mix priming coat over new steel or other metal surface including preparing the surface after throughly cleaning oil, grease, dirt and other foreign matter, and scoured with wire brushes, fine steel wool, sand paper including cost of materials , labour, complete as per specifications

Providing and applying enamel metal paint two coats over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt, and other foreign matter , including cost of materials , labour , complete as per specifications

Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other forigen matter including preparing the surface even the surface even and sand paper smooth, cost of materials, labour, complete as per specifications - with primer -

Providing and applying painting two coats of (excluding priming coat) on new wood surface and / or wood based surface coal tar paint to give an even shade,cleaning the surface of all dirt,dust and fireign matter, sand papering including cost of materials,labour,complete as per specifications

Providing and fixing 15 mm thick densified regular edged eco friendly light weight calcium silicate False ceiling tiles of approved texture spintone/cosmos/Hexa or equivalent of size 595X595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per sqm including both sides) consisting of main T runner suitably spaced at joints to get required length and of size 24 X 38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross T of size 24 X 28 mm made out of 0.33 mm (minimum) sheet, 1200 mm long spaced between main T at 600 mm centre to centre to form a grid of 1200 X 600 mm and secondary cross T of length 600 mm and size 24 X 28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200X600 mm panel to form grid of size 600X600 mm resting on periphery walls / partitions on a Perimeter wall angle precioated steel of size 24X24X3000 mm made of 0.40 mm thick with 25 mm long dry wall screwes at 230 mm intervals and laying 15 mm thick densifed edges calcium silicate ceiling tiles of approved texture (Spintone / Cosmos) in the grid including cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main T runners ti be suspended from ceiling using G I slotted cleats of size 25X35X1.6 mm fuixed to ceiling with 12.5 mm dia and 50 mm long dash fasterners, 4 mm GI adjustable rods with galvanized stell level clips of size 85 X 30 X 0.80mm spaced at 1200 mm centre to centre along main T bottom exposed with 24 mm of all T sections shall be pre painted with polyster baked paint for all heights, as per specifications, drawings and as directedbyEngineer in charge 8.28 BCSR 2018-19 page no. 50

Fabricating, supplying & erecting M.S. angular Truss of span upto 10m. The bottom & top member is provided with 50x50x6mm double equal angles, welded back to back and in between top & bottom line, in areas of mid section is provided with 50x50x6mm equal single angle for vertical and inclined members and at supporting ends 40x40x5mm single angle is provided. All the members are welded together with 6mm gusset plate as per Drawing No.CBS/ SD/K-Mantap/9/MND/97. The entire truss is anchored in RCC column by using 4 Nos. of M.S. anchor bolts at each support, with 10mm thick base plate and shoe plate.The work includes cutting, straightening, placing in position of M.S angle and wleding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, & hire charges of machineries for cutting, welding, grinding & erection equipments, etc., complete as per specification.

Providing and applying polishing with french polish on new wood surface and / or wood based surface to give an even surface after cleaning the surface of all dirt, dust and foreign matter, sand papered smooth, including cost of wood filler and materials, labour, complete as per specifications