Institute For Stem Cell Biology And Regenerative Medicine Tender

Fabricating Supplying and fixing Modular Workstation , Fabricating Supplying and fixing Modular Workstation made of 25mm thick prelam Particle board for table top with post formed front edge (with bird break Profile) & PVC edge beading on the remaining Cutedges. Vertical support of 45mm x 45 mm x 2 mm and horizontal support of 50 mm x 20 mm with Mild Steel frame work with powder coating. The vertical supports to be provided only at end and not in the centre of the L-shaped table. It shall be with 1.5mm thick powder coated Mild steel Modesty panel on table Front side. The table top shall have lamimated sandwich glass writing surface through out the table length & sliding pinupboard of 600 mm x 300 mm on to a portion of laminated glass surface and is provided along the surface of the table top. Typical depth of individual workstation is 700mm (D) and height 750mm, where 750mm is the level at which table top is placed. Complete as per the instructions of the officer - incharge, all details in the specifications. Dimensions 1550mm+2100mm(L)x700mm(W)x 750mm(H)

Fabricating Supplying and fixing Modular Workstation , Fabricating Supplying and fixing Modular Workstation made of 25mm thick prelam Particle board for table top with post formed front edge (with bird break Profile) & PVC edge beading on the remaining Cutedges. Vertical support of 45mm x 45 mm x 2 mm and horizontal support of 50 mm x 20 mm with Mild Steel frame work with powder coating. The vertical supports to be provided only at end and not in the centre of the L-shaped table. It shall be with 1.5mm thick powder coated Mild steel Modesty panel on table Front side. The table top shall have lamimated sandwich glass writing surface through out the table length & sliding pinupboard of 600 mm x 300 mm on to a portion of laminated glass surface and is provided along the surface of the table top. Typical depth of individual workstation is 700mm (D) and height 750mm, where 750mm is the level at which table top is placed. Complete as per the instructions of the officer - incharge, all details in the specifications. Dimensions 1500mm(L)x700mm(W)x 750mm(H)

Fabricating Supplying and fixing Modular Workstation , Fabricating Supplying and fixing Modular Workstation made of 25mm thick prelam Particle board for table top with post formed front edge (with bird break Profile) & PVC edge beading on the remaining Cutedges. Vertical support of 45mm x 45 mm x 2 mm and horizontal support of 50 mm x 20 mm with Mild Steel frame work with powder coating. The vertical supports to be provided only at end and not in the centre of the L-shaped table. It shall be with 1.5mm thick powder coated Mild steel Modesty panel on table Front side. The table top shall have lamimated sandwich glass writing surface through out the table length & sliding pinupboard of 600 mm x 300 mm on to a portion of laminated glass surface and is provided along the surface of the table top. Typical depth of individual workstation is 700mm (D) and height 750mm, where 750mm is the level at which table top is placed. Complete as per the instructions of the officer - incharge, all details in the specifications. Dimensions 1800mm+1600mm(L)x700mm(W)x 750mm(H)

Fabricating Supplying and fixing Modular Workstation , Fabricating, supplying and fixing of pedestal storage unit of 2 drawers and 1 file drawer made of 20mm thick prelam particle board all edges to have PVC edge banding, complete with all necessary accessories, hardware, locks, slides and channels, castors, ball catch, etc. as per the instructions of the Officer- Incharge, all details in the specifications and relevant drawings. Size 450mm (W) X 450mm (D) X 650mm (H)

Fabricating, Supply and fixing combination board , Combination Board - Fabricating, Supply and fixing combination board using G1 base, 12mm thick cellotex soft boards and approved fabric for pin up portion, and 8mm thick ceramic steel writing board, of sizes mentioned below complete with all nesscessary accessories and handware with clamps for fixing to the wall/ columm, etc. as per instruction of officer - incharge all details in the specification and relevant drawings of over all sizes. Size 2000(L) 1000(pinup) + 1000(writing) X 1200(H)

Supply and placing of metal filing cabinet , Supply and placing of metal filing cabinet with powder coating for storing the office files (4 tiers) of size 450mm(W)x650mm(D)x1370mm(H) each shelf to be provided with file holder at least 50 to 60 files in each racks complete with necessary accessories locks, concealed handle etc.

Fabricating, supplying and fixing the tall height storage units , Fabricating, supplying and fixing the tall height storage units made of 20mm thick opaque prelam partical board with two rows of intermidiate prelam shelves at the bottom, two rows of shelves at the top all edges to have pvc edge banding complete with all necessary accessories, handware, locks castors, magnetic catch metal - concealed full width handless etc, as per the instructions of the officer incharge. Dimensions Size 1200mm (L) X 400mm(D) X 2100mm (H)

Supply and placing of Ergonomic Chairs , Supply and placing of Ergonomic Chairs

Supply and placing of Visitor Chairs , Supply and placing of Visitor Chairs