Indian Oil Adani Gas Private Limited Tender

LIGHTING POLE ,LIGHT FIXTURES AND JUNCTION BOX

S.I.T.C of Steel tubular pole (swaged) confirmiry IS 2713 (part-II) 1980 designated 410 SP-25 manufacture of steel tubes can be permitted manually by are welding process or allow to coufirm as IS Specification of steel tubes of following dimensions swaged to gather complete painted with one coat of red oxide and two coats of Aluminium paint erected with metalic base plate 300mm x 300mm x 4mm thick steel tubular pole should be ISI mark Tata/Asian/jindal/Surya.make. Over all length 7.00 Mtr Approximate wt of pole 78kg within permissible limits as per IS. Effective length of section as: Bottom : 4 mt having out side dia 114.3 mm x 3.65 mm wall Thickness. Middle : 1.5 mt having O.D.88.9mm x 3.25mm Thickness TOP.1.5 mt having O.D.76.10 mm x 3.25 mm thickness.

S.I.T.C of 3 way Flam proof junction box (2 incomming cable & 1outgoing cable),IP65 weatherproof enclosure.

Supply,Installation,testing and commissioning of 45w LED WELL GLASS Flame Proof Light

Providing Porta cabin 10'x10'x8.5' (lxbxh) with suitable size door and window at the entrance in MS tube structure, side walls PVC 6mm thick sheet, Sliding glass with E-channel & 5mm thick glass, Top Galvanism PPGI Sheet, Flooring @ 12mm thick plywood with vinyl matt, Tube light with power socket and writing desk with attached Toilet Cabin including Water Tank 1000Ltr capacity with Stand.

Providing Porta EWC cabin of 4'x4'x8' (lxbxh) in MS framess @ 1 inch & coated with anti -corrosive paint, Roof @ GIsheet @ 0.5mm thick, Side walls in PVC sheet @ 6mm thick, Flooring @ vinyl matt flooring, Closet & Washbasin, Health faucet

METAL STONE FILLING : 20mm STONE SIZE: Providing and laying of machine cut stone aggregate (metal stone) of size 20 mm in layers of 100 mm including compacting as per specifications and directions of Engineer-in-Charge.

Fabrication of MS Railing at CGS : Supplying, fabricating and fixing M.S. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc, placing in position, embedding in concrete, applying two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent make as per manufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing anchor plates,bolts, theading, nuts, washers, sleeves etc..complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer.

GI PIPE: 50 mm Dia B-Class Providing and installation of G.I. Pipe B-Class (Medium) as per IS:1239, TATA/ASIAN or any other ISI mark equivalent make including all required G.I. Fittings and specials i.e., bends, tees, crosses, plugs, reducers, cowls, offsets, etc. in pipe ducts, sunken floors, by making cavity in brickwork, RCC work including clamps and hinges, cutting,bending and making threads, etc. and testing of complete installations. Damaged surface shall be properly finished after installation of pipeline with cement mortar/putty/plaster of paris, etc. as per the condition and directions of Engineer In charge. Actual / Net measured length of total pipeline shall be paid.

ELECTRICAL CHAMBER- 450 X 450 X 450/600 MM Construction of brick wall chamber / pit for electrical pit / earthing pit/ water chamber of approved size and shape as per in detail dwg. with excavation, soiling, PCC (1:4:8),RCC, Copping, full brick walls, fixing MS frame and MS cover, copping surface shall finish using surface hardener, inside finished with a 15 mm water proofing smooth cement plaster, primer & paint etc. all complete incl curing & testing. 12 mm thick M.S. plate cover with frame as per detail with one coat zinc chromite primer and two coat 50 micron Synthetic Enamel / Oil paint as directed by EIC of approved colour and make etc. all complete as per specifications and approved by consultant or client. Work shall complete as per detailed drawing. Chamber Dimensions shall measure in to in.

CABLING MEDIUM VOLTAGE CABLES S.I.T.C of XLPE Insulated 1100V Grade ,steel armoured Aluminium/Copper conductor cable (as per IS 7098 Part I) With FRLS PVC Sheath ;of following sizes & type surface trench/on wall/structure surface/in G.I Pipes/conduit as specified (Refer SLD& Cable routine plan) Proper cable dressing, cable clamping, cable tag inditification both ends, cable tag & cable clamping with Al/GI strip. inclusive all test before and after laying of cable .

3.0 Cx 4.0 Sq.mm. XLPE Armoured copper cable

3.0 Cx 2.5 Sq.mm. XLPE Armoured copper cable

BORE WELL : 8" Dia Drilling of Tube well / Bore well at site at preferred location / location shall finalized only after getting geological cum hydrological survey report in consultation with PMC. Construction of Tube well/ Bore well of size 350/450 MM - 8" DIA up to 225 meter depth by drilling in any soil strata including soft / Hard rock braking including supplying, lowering and laying 160 meter casing pipe of 200mm dia PVC pipe with 60 meter strainer pipe with suitable slot with river bed gravel packing and clay ball/clay packing, filter, level indicator, including mud lifting and removal and disposal of excavated non-serviceable soil out site IOAGPL premises at any lead. Scope shall include supply and installation of electrical submersible pump 10-15 H.P. with installation heavy duty UPVC bore well pipes for water lifting with 300 meter cable of 10 sq mm 3 core with control panel etc. all complete as per instruction of PMC / ADANI GAS engineer in charge. Scope shall include construction of bore well chamber, supply and installation of water meter and including construction of chamber for water meter, Auto cutoff switch etc. all complete.

SEPTIC TANK : Providing and construction of Septic tank of size 2000 x 900 x 1700 deep (Clear in to in dimensions) with wall in brick masonry and base and top slab in RCC M-20 with FRC manhole cover of HD-60 capacity, complete in all respect as per scope of work and detailed construction drawing. Rate to include cost of all labor, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement including chemical resistant paint for sub-structures, bricks, reinforcement steel, inserts, bolts, covers, aggregates/ sand fill conduits, finishes, bitumen, other minor construction materials, shuttering, staging, earth work in excavation in any kind of soil including hard murrum, soft rock, hard rock by pneumatic drilling etc. and backfilling using serviceable / borrow earth in all conditions, shoring / strutting, bailing and pumping out water, masonry work, plastering, plumbing, sanitation etc. with all bye works and sundry works

SOAK PIT : Providing and construction of soak pit of size 2500mm diameter and minimum 4.20m deep with 350mm th. side wall in hollow brick masonry and top slab in RCC M-20/M25 as specified in drg, with FRC manhole cover of HD-60 capacity., complete in all respect as per scope of work and detailed construction drawing. Rate includes cost of all labor, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 / 53 grade cement including chemical resistant paint for sub-structures, bricks, reinforcement steel, inserts, bolts, covers, aggregates/ brick bats filling in 1.00 mt depth as shown in drawing and other all minor construction materials, shuttering, staging, earth work in excavation and backfilling using serviceable earth / earth brought from outside, shoring / strutting, bailing and pumping out water, masonry work, plastering, plumbing, sanitation etc. with all bye works and sundry works.

CPVC PIPE:50mm Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floorRate Shall including of clamps, overhang channel bolts nuts etc. complate as directed by Engineer In charge. E] 50 mm

GRASS LAWN Plantation and grass loan in planter with plants and english grass carpet etc. complete with all miscellaneous works, and sundry works. GRASS LAWN: Prepare the surface for grass and grassing the grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying of grass earth. DACORATIVE PLANTS: Preparation of bed hedging and shrubbery by excavating 60 cm deep at 750 mm C/C and trenching the the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth and 1 part of manure) flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of material declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 100 m lift upto 1.5 m complete and cost of sludge, manure or extra earth.

Design, Supply & Installation of the lightning protection system at CGS : ALLTEC Terastreamer Lightning Arrestor with SS Adaptor TSP20 , Earting : Maintenance free earthing for lightning arrestor: Using 2 Nos of 2 Mtr long/250 Micron or 4feet 3 Nos 250 Micron, 14.2mm Dia Dolphin UL listed Copper Bonded steel rod & TEKSO ELECTRON fill,a low resistivity RoHS certified and maintenance free grounding enhancement backfill compound 25Kgs, Elevation Mast: Specially designed 3 Mtr GI mast setting and 1 Mtr FRP top section insulation mast; Roof top/Tower/Pole side Mounting arrangement and fixing accesories (anchoring rope & anchoring plate, Base-for roof top installation if required).The mast coated with pain for additional protection,cable connector adapter. Down Conductor:50Sq mm V GUARD insulated copper cable.

P.C.C. : (1:3:6) Providing and laying Plain cement Concrete of nominal mix 1:3:6 by mass (1 cement: 3 coarse sand: 6 crushed stone aggregates/gravels) with 40mm down size graded crushed stone aggregates for all depths below and up to plinth level in foundations, drains, fillings, non suspended floors, pavements and ramps or any other works etc. in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed, including tamping, ramming, vibrating, curing etc. all as specified including the cost of materials, labour, tools, tackles, machinery, steel scaffolding/staging, sampling and testing all complete as per specification and direction of EIC/Consultant. Actual/Net measured quantities shall be paid. Cost shall including of formwork.

RAYAPUR IOAGPL STORE SITE

Plaster Work of Closed Storage Yard and Compound Wall: Prepare surface and plaster external walls of brick/block/RCC /stone with sand fine plastered 20 mm thick with C.M.1:5 with the addition of water proof compound at the rate of 2% by weight of cement, including sand or sponge, polish to surface.

PAINT : Exterior Weather Proof (Apex Ultima) Providing and applying of exterior weather resistant 100% Acrylic paint of Apex Ultima matt finish paint (Base primer coat + Min. 3 or more coats) of approved make (Asian/Burger/ ICI )make shade for even finishing of external exposed walls/surface up to any height and level. The scope shall include Erecting, Scaffolding at all levels, preparing the surface by scrubbing with wire brush and removal of old paint (if exist), dust, oil, grease and any other particle for surface preparation before new paint application. Paint shall done with applying 1 coat of primer and 3 coat (minimum) of Apex Ultima Paint to give rash free smooth even finish . Rate shall including material, labour, tools tackles, scaffolding etc. all complete as specified and directed by EIC. Measurement to be considered as per actual on site for payment.

Road improvement work : Consruction of WBM : 300 MM Th.-Supplying and laying of 300mm Th. WBM LAYER BASE COURS (1st layer of 150mm th of downgraded stone size 63 to 90 mm and 2nd layer of 150mm th of downgraded stone size 40 to 63 mm) tough, sound, clean and durable including cost of stone aggregates with quarry dust / murrum filling in voids correcting the grade and slope for, all royalties, taxes, handling, transportation to site, unloading the same by the side of the road with all leads and lifts, spreading and laying to form water bound macadam in TWO LAYER of 150mm EACH compacted thickness to proper grade, camber & level, binding the surface with murrum, including the cost of supply of murrum, consolidating with min 10 T Vibro road-roller, watering, with all leads & lifts including preparation of camber below Paver etc. complete as per drawings, specification and direction Engineer-in-Charge Asphalting : Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder,transported to site by tippers,laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specificaton and density, complete as per specifications and directions of Engg-in Charge. 50 to 100mm average compacted thickness with bitumen. Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using bitumen including rolling and finishing with power road roller all complete.

LIGHTING POLE AND JUNCTION BOX S.I.T.C of Steel tubular pole (swaged) confirmiry IS 2713 (part-II) 1980 designated 410 SP-25 manufacture of steel tubes can be permitted manually by are welding process or allow to coufirm as IS Specification of steel tubes of following dimensions swaged to gather complete painted with one coat of red oxide and two coats of Aluminium paint erected with metalic base plate 300mm x 300 mm x 4mm thick steel tubular pole should be ISI mark Tata/Asian/jindal/Surya.make. Over all length 9.00 Mtr Approximate wt of pole 78kg within permissible limits as per IS. Effective length of section as: Bottom : 5 mt having out side dia 114.3 mm x 3.65 mm wall Thickness. Middle : 2.0 mt having O.D.88.9mm x 3.25mm Thickness TOP.2.mt having O.D.76.10 mm x 3.25 mm thickness.

3 way Flam proof junction box (2 incomming cable & 1outgoing cable)

Supply,Installation,testing and commissioning of 60w LED WELL GLASS Flam Proof Light

Parapet wall above closed store: Providing and constructing 150mm th. solid concrete block masonry in CM 1:6, for walls/pillars/supports/boundary wall using pre-cast blocks of 400 x 200 x 150 mm size with minimum crushing strength of 35kgs/sq.cm. including raking out joints, scaffolding etc.,

BARBED WIRE CONCERTINA COIL FENCING Providing and fixing barbed wire concertina coil fencing with punched tape concertina coil 450 mm dia 10 metre openable length (total length 90 m) having 50 nos rounds per 6 metre length, over 2.5 m height of wall with L-50x50x5 mm thk angle iron 'Y' shaped placed 2.0 m apart and with 6 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-incharge with reinforced barbed tape (R.B.T.)/Spring core (2.5mm thick) wire of high tensile strength of 1800N/mm with tape (0.52 mm thick) and minimum coil weight 50kg/coil bove compound walls on existing steel angles

"RCC : M25 (SUB & SUPER STRUCTURE): Providing and laying Reinforced Cement Concrete of nominal mix M-25 (1:1:2) Grade Excluding the cost of formwork and reinforcement , with 20 mm & down size graded crushed stone aggregates in SUB-STRUCTURE and SUPER STRUCTURE below plinth level of all types e.g. foundations, rafts, beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, manholes, pipe encasement, catch pits, drains, RCC pits, equipment foundations, pedestals, columns, pavements, suspended floors, brackets etc. and in SUPER STRUCTURE like beams, slabs, walls including counter forts, staircases, landings, steps, facias, gutters, shelves, window sills, canopies, lintels, ducts, brackets, chhajjas with drip molds etc. and any other structures in any other structures (including single pour concreting upto 50 Cu. m.) providing pockets, openings, recesses, chamfering, vibrating, tamping, curing and rendering, to give a smooth and even surface for all depths below and upto plinth level in any position, shape, level and thickness etc. including the cost of materials, labour, tools, tackles, machinery, steel scaffolding/staging, sampling and testing all complete as per specifications and directions of the Engineer-in-charge. Actual/Net measured quantities shall be paid. "

"TMT STEEL REINFORCEMENT : Supplying and placing in position High strength deformed TMT Steel Bars Reinforcement (Conforming to IS:1786, Grade Fe 415/500/500D) of TATA or equivalent make (as approved by EIC) for RCC work including transporting, straightening, cleaning, de-coiling, cutting & binding to required shapes and lengths as per details, binding with contractor's own 16SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fan hooks etc. for all heights and depths etc. complete as per specification, directions and drawings. ALL MATERIALS SUPPLIED BY THE CONTRACTOR. (Supports, Chairs and laps are included in the cost and no separate measurement qty will be paid for the same) Reinforcement steel shall be of Tata, Sail, vizag or approved by consultant.)"

"SHUTTERING : Providing and fixing Shuttering/Form work using ordinary timber plank, shuttering ply, steel plates so as to give smooth finish, including centering, shuttering, strutting, propping, surface oiling, nails, binding wire etc. keeping the necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete for SUB STRUCTURE like foundations, pedestals, footings, slabs, pile caps, retaining walls, beams, staircases, landings, suspended slabs, etc. and SUPER STRUCTURE like in equipment foundations, columns, lintels, slabs, beams, staircases, landings, suspended slabs/floors/roofs, walls etc. and other structures keeping the same in position during concreting and removal of the same after specified period in all complete and as specified and directed. Actual/Net measured quantities shall be paid. The rate shall includes cost of material, labour, tools tackles, machinery etc. all complete. Actual/Net measured quantities shall be paid. "

GI PIPE: 100 mm Dia B-Class Providing and installation of G.I. Pipe B-Class (Medium) as per IS:1239, TATA/ASIAN or any other ISI mark equivalent make including all required G.I. Fittings and specials i.e., bends, tees, crosses, plugs, reducers, cowls, offsets, etc. in pipe ducts, sunken floors, by making cavity in brickwork, RCC work including clamps and hinges, cutting,bending and making threads, etc. and testing of complete installations. Damaged surface shall be properly finished after installation of pipeline with cement mortar/putty/plaster of paris, etc. as per the condition and directions of Engineer In charge. Actual / Net measured length of total pipeline shall be paid.

GI PIPE: 50 mm Dia B-Class Providing and installation of G.I. Pipe B-Class (Medium) as per IS:1239, TATA/ASIAN or any other ISI mark equivalent make including all required G.I. Fittings and specials i.e., bends, tees, crosses, plugs, reducers, cowls, offsets, etc. in pipe ducts, sunken floors, by making cavity in brickwork, RCC work including clamps and hinges, cutting,bending and making threads, etc. and testing of complete installations. Damaged surface shall be properly finished after installation of pipeline with cement mortar/putty/plaster of paris, etc. as per the condition and directions of Engineer In charge. Actual / Net measured length of total pipeline shall be paid.

ELECTRICAL CHAMBER- 450 X 450 X 450/600 MM Construction of brick wall chamber / pit for electrical pit / earthing pit/ water chamber of approved size and shape as per in detail dwg. with excavation, soiling, PCC (1:4:8),RCC, Copping, full brick walls, fixing MS frame and MS cover, copping surface shall finish using surface hardener, inside finished with a 15 mm water proofing smooth cement plaster, primer & paint etc. all complete incl curing & testing. 12 mm thick M.S. plate cover with frame as per detail with one coat zinc chromite primer and two coat 50 micron Synthetic Enamel / Oil paint as directed by EIC of approved colour and make etc. all complete as per specifications and approved by consultant or client. Work shall complete as per detailed drawing. Chamber Dimensions shall measure in to in.

Demolishing of existing cables ducts, removal of all cables and relaying of all cables in new ducts. Total Length of Electrical and CAT cable is 570 Mtrs

Supply, Installation, testing & commissioning of Earthing system with Pipe-in-pipe technology. Two B class IS mild steel pipes, one inside the other, hot dip galvanized with 100 micron coating outside and about 300 micron coating inside, filled with high conductive and corrosion resistant crystalline mixture and Backfill Compound around electrode.The unit rate shall also include making earthing chamber with MS cover at Ground level and providing earthing terminal to test earthing of each pit seperately

Model T-19 ( 50mm dia 3 meter is used in place of the conventional GI earthing)

25 mm x 3 mm G.I Earthing strip

Model T-39 ( 80 mm dia, 3 meter is used in place the conventional copper earthing ) 8 EA

25 mm x 3 mm Copper Earthing strip